Nanoindentation study of thin plasma enhanced chemical vapor deposition SiCOH low-k films modified in He/H2 downstream plasma

The effect of He/H2 downstream plasma (DSP) on the mechanical properties of plasma enhanced chemical vapor deposition SiCOH low-k films was studied using nanoindentation (NI) with the continuous-stiffness measurement technique. Furthermore, the main requirements for reliable NI measurements on plasma-modified low-k films are discussed. The results show that the mechanical properties of these films are intimately linked with their porosity and that exposure to He/H2 DSP causes a change in both the porosity and the mechanical properties of the films. This change is related to the removal of porogen residue formed during the ultraviolet curing of the low-k film.

[1]  William D. Nix,et al.  A method for interpreting the data from depth-sensing indentation instruments , 1986 .

[2]  Denis Shamiryan,et al.  Effect of Porogen Residue on Chemical, Optical, and Mechanical Properties of CVD SiCOH Low-k Materials , 2009 .

[3]  A. E. Giannakopoulos,et al.  Analysis of Berkovich indentation , 1996 .

[4]  A. Pelegri,et al.  Mechanical Characterization of Thin Film Materials with Nanoindentation Measurements and FE Analysis , 2006 .

[5]  J. Maniks,et al.  Effect of substrate hardness and film structure on indentation depth criteria for film hardness testing , 2008 .

[6]  B. Lawn,et al.  Evaluation of elastic modulus and hardness of thin films by nanoindentation , 2004 .

[7]  George M. Pharr,et al.  Substrate effects on nanoindentation mechanical property measurement of soft films on hard substrates , 1999 .

[8]  Jaroslav Kováčik,et al.  Correlation between Young's modulus and porosity in porous materials , 1999 .

[9]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[10]  R. Dauskardt,et al.  Toughening of nanoporous glasses using porogen residuals , 2004, Nature materials.

[11]  P. Verdonck,et al.  Spectroscopic ellipsometry and ellipsometric porosimetry studies of CVD low‐k dielectric films , 2008 .

[12]  I. N. Sneddon.  The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile , 1965 .

[13]  N. Possémé,et al.  Modifications of dielectric films induced by plasma ashing processes: Hybrid versus porous SiOCH materials , 2008 .

[14]  Edward J. Garboczi,et al.  Elastic Properties of Model Porous Ceramics , 2000, cond-mat/0006334.

[15]  Steve Bull,et al.  Nanoindentation of coatings , 2005 .

[16]  Alexei Bolshakov,et al.  Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniques , 1998 .

[17]  J. Vlassak,et al.  Mechanical properties of porous and fully dense low-κ dielectric thin films measured by means of nanoindentation and the plane-strain bulge test technique , 2006 .

[18]  J. D. Luttmer,et al.  Chemical–mechanical polishing of SiOC organosilicate glasses: the effect of film carbon content , 2001 .

[19]  W. Tseng,et al.  Chemical-mechanical polishing of low-dielectric-constant spin-on-glasses: film chemistries, slurry formulation and polish selectivity , 1997 .

[20]  G. Mannaert,et al.  Effects of Bias, Pressure and Temperature in Plasma Damage of Ultra Low-k Films , 2007 .

[21]  Lu Shen,et al.  Determination of the hardness and elastic modulus of low- k thin films and their barrier layer for microelectronic applications , 2003 .

[22]  H. Yano,et al.  High-performance CMP Slurry with Inorganic/Resin Abrasive for Al/Low k Damascene , 2001 .

[23]  Karen Maex,et al.  Low dielectric constant materials for microelectronics , 2003 .

[24]  F. Iacopi,et al.  Extent of plasma damage to porous organosilicate films characterized with nanoindentation, x-ray reflectivity, and surface acoustic waves , 2006 .