Research progress on power battery cooling technology for electric vehicles

Abstract In the charging and discharging process of new energy vehicles, how to maintain power battery within optimum operating temperature range, reduce the peak temperature and temperature difference, which is a problem needs to be paid attention to. Proper cooling technology can reduce the negative influence of temperature on battery pack, effectively improve power battery efficiency, improve the safety in use, reduce the aging rate, and extend its service life. In this context, several battery thermal management systems(BTMS) are reviewed, including air cooling BTMS, liquid cooling BTMS and refrigerant direct cooling BTMS in traditional battery thermal management system; phase change material-based BTMS, heat pipe-based BTMS and thermoelectric element-based BTMS in new battery thermal management system. In order to reduce negative influence of excessive temperature on the battery pack, and to seek feasible solutions for BTMS in future development, the above six power battery cooling technologies are discussed. Summarize the research emphases and research progress of different BTMS at present. Objectively evaluate the advantages and disadvantages of each BTMS. Considering actual working conditions, the installation feasibility, as well as economic benefits of each BTMS, then discuss proper solutions, and predict future development trends reasonably. Finally, analyze and discuss the differences and gaps between traditional and new BTMS. Providing a reference for designing the best BYMS solution. Ensuring the battery is in the optimum operating temperature range, maintain the BTMS stable operation, and improve battery conversion efficiency, providing valuable solutions for the BTMS research in the future.

[1]  Ibrahim Dincer,et al.  Thermal and electrical performance evaluations of series connected Li-ion batteries in a pack with liquid cooling , 2018 .

[2]  Shuangfeng Wang,et al.  A compact and lightweight liquid-cooled thermal management solution for cylindrical lithium-ion power battery pack , 2019 .

[3]  A. Jain,et al.  Experimental and numerical investigation of core cooling of Li-ion cells using heat pipes , 2016 .

[4]  Zhonghao Rao,et al.  Thermal performance of liquid cooling based thermal management system for cylindrical lithium-ion battery module with variable contact surface , 2017 .

[5]  Chuan Li,et al.  Active cooling based battery thermal management using composite phase change materials , 2019, Energy Procedia.

[6]  Yupeng Wu,et al.  A review of the applications of phase change materials in cooling, heating and power generation in different temperature ranges , 2018, Applied Energy.

[7]  Liang Gao,et al.  Multi‐objective design optimization for mini‐channel cooling battery thermal management system in an electric vehicle , 2019, International Journal of Energy Research.

[8]  Bonnie M. Liu,et al.  An improved resistance-based thermal model for a pouch lithium-ion battery considering heat generation of posts , 2020 .

[9]  B. Li,et al.  Experimental investigation on EV battery cooling and heating by heat pipes , 2015 .

[10]  Ahmad Pesaran,et al.  Battery thermal models for hybrid vehicle simulations , 2002 .

[11]  Y. Inui,et al.  Simulation of temperature distribution in cylindrical and prismatic lithium ion secondary batteries , 2007 .

[12]  Jiateng Zhao,et al.  Experimental study on the thermal management performance of phase change material coupled with heat pipe for cylindrical power battery pack , 2017 .

[13]  U. Iraola,et al.  Lithium-ion capacitor safety assessment under electrical abuse tests based on ultrasound characterization and cell opening , 2019, Journal of Energy Storage.

[14]  Michael Hinterberger,et al.  Battery thermal management system for electric vehicle using heat pipes , 2018, International Journal of Thermal Sciences.

[15]  Ajay Kapoor,et al.  An improved theoretical electrochemical-thermal modelling of lithium-ion battery packs in electric vehicles , 2015 .

[16]  Tao Wang,et al.  Development of efficient air-cooling strategies for lithium-ion battery module based on empirical heat source model , 2015 .

[17]  Ruijin Fan,et al.  Thermal management of the lithium-ion battery by the composite PCM-Fin structures , 2019 .

[18]  M. Jiang,et al.  The government regulation and market behavior of the new energy automotive industry , 2019, Journal of Cleaner Production.

[19]  Miroslav Krstic,et al.  PDE model for thermal dynamics of a large Li-ion battery pack , 2011, Proceedings of the 2011 American Control Conference.

[20]  A. Jain,et al.  Experimental and theoretical analysis of a method to predict thermal runaway in Li-ion cells , 2016 .

[21]  Akhil Garg,et al.  A simulation-based probabilistic framework for lithium-ion battery modelling , 2018 .

[22]  E Jiaqiang,et al.  Investigation on thermal performance and pressure loss of the fluid cold-plate used in thermal management system of the battery pack , 2018, Applied Thermal Engineering.

[23]  Huifang Kang,et al.  Reverse layered air flow for Li-ion battery thermal management , 2018, Applied Thermal Engineering.

[24]  E Jiaqiang,et al.  Orthogonal experimental design of liquid-cooling structure on the cooling effect of a liquid-cooled battery thermal management system , 2018 .

[25]  Mohammed M. Farag,et al.  Combined electrochemical, heat generation, and thermal model for large prismatic lithium-ion batteries in real-time applications , 2017 .

[26]  S. Mahmud,et al.  Electric vehicle battery thermal management system with thermoelectric cooling , 2019, Energy Reports.

[27]  Mengyan Zang,et al.  Structural optimization of lithium-ion battery pack with forced air cooling system , 2017 .

[28]  Zhonghao Rao,et al.  Thermal characteristic and analysis of closed loop oscillation heat pipe/phase change material (CLOHP/PCM) coupling module with different working media , 2018, International Journal of Heat and Mass Transfer.

[29]  Zhiyong Liang,et al.  The low and high temperature electrochemical performance of Li3VO4/C anode material for Li-ion batteries , 2015 .

[30]  Weixiong Wu,et al.  Thermal management optimization of a prismatic battery with shape-stabilized phase change material , 2018, International Journal of Heat and Mass Transfer.

[31]  F. Zhang,et al.  Effects of the different air cooling strategies on cooling performance of a lithium-ion battery module with baffle , 2018, Applied Thermal Engineering.

[32]  J. Ji,et al.  Recent development and application of thermoelectric generator and cooler , 2015 .

[33]  Jianqiu Li,et al.  A review on the key issues for lithium-ion battery management in electric vehicles , 2013 .

[34]  Zhonghao Rao,et al.  Experimental investigation of battery thermal management system for electric vehicle based on paraffin/copper foam , 2015 .

[35]  Yong Tang,et al.  Heat‐pipe‐based thermal management and temperature characteristics of Li‐ion batteries , 2016 .

[36]  Junyao Wang,et al.  Improved thermal performance of a large laminated lithium-ion power battery by reciprocating air flow , 2019, Applied Thermal Engineering.

[37]  Lip Huat Saw,et al.  Numerical analyses on optimizing a heat pipe thermal management system for lithium-ion batteries during fast charging , 2015 .

[38]  Jiateng Zhao,et al.  Investigation of power battery thermal management by using mini-channel cold plate , 2015 .

[39]  James Marco,et al.  A new approach to the internal thermal management of cylindrical battery cells for automotive applications , 2017 .

[40]  Lei Zhang,et al.  Co-estimation of capacity and state-of-charge for lithium-ion batteries in electric vehicles , 2019, Energy.

[41]  Y. Li,et al.  Thermal and electrochemical performance of a serially connected battery module using a heat pipe-based thermal management system under different coolant temperatures , 2019 .

[42]  Diego Lisbona,et al.  A review of hazards associated with primary lithium and lithium-ion batteries , 2011 .

[43]  Xiu-xing Yin,et al.  A novel heat pipe assisted separation type battery thermal management system based on phase change material , 2020 .

[44]  Wahid Maref,et al.  Performance optimization of cascaded and non-cascaded thermoelectric devices for cooling computer chips , 2019, Energy Conversion and Management.

[45]  Hao Li,et al.  Thermal characteristics of power battery pack with liquid-based thermal management , 2020 .

[46]  Ziyad M. Salameh,et al.  A novel thermal management for electric and hybrid vehicles , 2005, IEEE Transactions on Vehicular Technology.

[47]  Yun Bao,et al.  Experimental study on the thermal management performance of air cooling for high energy density cylindrical lithium-ion batteries , 2019, Applied Thermal Engineering.

[48]  Mengxuan Song,et al.  Design of the structure of battery pack in parallel air-cooled battery thermal management system for cooling efficiency improvement , 2019, International Journal of Heat and Mass Transfer.

[49]  Bernard Desmet,et al.  Experimental investigation on the feasibility of heat pipe cooling for HEV/EV lithium-ion battery , 2014 .

[50]  D. Jeon,et al.  Thermal modeling of cylindrical lithium ion battery during discharge cycle , 2011 .

[51]  M. S. Akhtar,et al.  Impact of porous Mn3O4 nanostructures on the performance of rechargeable lithium ion battery: Excellent capacity and cyclability , 2019, Solid State Ionics.

[52]  J. Selman,et al.  Active (air-cooled) vs. passive (phase change material) thermal management of high power lithium-ion packs: Limitation of temperature rise and uniformity of temperature distribution , 2008 .

[53]  Doron Aurbach,et al.  Challenges in the development of advanced Li-ion batteries: a review , 2011 .

[54]  Jay Lee,et al.  Review and recent advances in battery health monitoring and prognostics technologies for electric vehicle (EV) safety and mobility , 2014 .

[55]  Shashank Arora,et al.  Selection of thermal management system for modular battery packs of electric vehicles: A review of existing and emerging technologies , 2018, Journal of Power Sources.

[56]  R. Mahamud,et al.  Reciprocating air flow for Li-ion battery thermal management to improve temperature uniformity , 2011 .

[57]  Dong Soo Jang,et al.  Simulation on cooling performance characteristics of a refrigerant-cooled active thermal management system for lithium ion batteries , 2019, International Journal of Heat and Mass Transfer.

[58]  Mehrdad Saif,et al.  Electrochemical–Thermal Model of Pouch-type Lithium-ion Batteries , 2017 .

[59]  Rangga Aji Pamungkas,et al.  Experimental investigation on performance of lithium-ion battery thermal management system using flat plate loop heat pipe for electric vehicle application , 2016 .

[60]  Guoqing Zhang,et al.  Experiment and simulation for pouch battery with silica cooling plates and copper mesh based air cooling thermal management system , 2019, Applied Thermal Engineering.

[61]  Xuning Feng,et al.  Mechanisms for the evolution of cell variations within a LiNixCoyMnzO2/graphite lithium-ion battery pack caused by temperature non-uniformity , 2018, Journal of Cleaner Production.

[62]  Andreas Jossen,et al.  Lithium plating in lithium-ion batteries investigated by voltage relaxation and in situ neutron diffraction , 2017 .

[63]  J. Selman,et al.  Passive control of temperature excursion and uniformity in high-energy Li-ion battery packs at high current and ambient temperature , 2008 .

[64]  Xiaohui Wang,et al.  Three-dimensional thermal modeling of a lithium-ion battery pack , 2012 .

[65]  A. Pesaran,et al.  A parametric study on thermal management of an air-cooled lithium-ion battery module for plug-in hybrid electric vehicles , 2013 .

[66]  Yasuhiro Harada,et al.  High-energy, fast-charging, long-life lithium-ion batteries using TiNb2O7 anodes for automotive applications , 2018, Journal of Power Sources.

[67]  Dinh Vinh Do,et al.  Thermal modeling of a cylindrical LiFePO4/graphite lithium-ion battery , 2010 .

[68]  Weixiong Wu,et al.  An experimental study of thermal management system using copper mesh-enhanced composite phase change materials for power battery pack , 2016 .

[69]  Lip Huat Saw,et al.  Performance assessment and optimization of a heat pipe thermal management system for fast charging lithium ion battery packs , 2016 .

[70]  G. Tan,et al.  A review of thermoelectric cooling: Materials, modeling and applications , 2014 .

[71]  Zhonghao Rao,et al.  Investigation of the thermal performance of phase change material/mini-channel coupled battery thermal management system , 2016 .

[72]  Lin Ma,et al.  Thermal management of a large prismatic battery pack based on reciprocating flow and active control , 2017 .

[73]  Sihui Hong,et al.  Design of flow configuration for parallel air-cooled battery thermal management system with secondary vent , 2018 .

[74]  Guoqing Zhang,et al.  Liquid cooling based on thermal silica plate for battery thermal management system , 2017 .

[75]  Zhonghao Rao,et al.  Experimental investigation on thermal management of electric vehicle battery with heat pipe , 2013 .

[76]  Yanbao Ma,et al.  Prevent thermal runaway of lithium-ion batteries with minichannel cooling , 2017 .

[77]  Heesung Park,et al.  A design of air flow configuration for cooling lithium ion battery in hybrid electric vehicles , 2013 .

[78]  M. Fowler,et al.  Thermal modeling and validation of temperature distributions in a prismatic lithium-ion battery at different discharge rates and varying boundary conditions , 2016 .

[79]  M. S. Naghavi,et al.  A state-of-the-art review on hybrid heat pipe latent heat storage systems , 2015 .

[80]  Zhen-ying Zhang,et al.  The solutions to electric vehicle air conditioning systems: A review , 2018, Renewable and Sustainable Energy Reviews.

[81]  X. M. Xu,et al.  Research on the heat dissipation performance of battery pack based on forced air cooling , 2013 .

[82]  Matthias Scharf,et al.  Scenarios for the Return of Lithium-ion Batteries out of Electric Cars for Recycling , 2015 .

[83]  Dibakar Rakshit,et al.  A comparative study on battery thermal management using phase change material (PCM) , 2019, Thermal Science and Engineering Progress.

[84]  Siamak Farhad,et al.  Dual-purpose cooling plate for thermal management of prismatic lithium-ion batteries during normal operation and thermal runaway , 2019, Applied Thermal Engineering.

[85]  Qiuwan Wang,et al.  Experimental study on pulse self–heating of lithium–ion battery at low temperature , 2019, International Journal of Heat and Mass Transfer.

[86]  Y. Ran,et al.  Novel leaf-like channels for cooling rectangular lithium ion batteries , 2019, Applied Thermal Engineering.

[87]  Weixiong Wu,et al.  A critical review of battery thermal performance and liquid based battery thermal management , 2019, Energy Conversion and Management.

[88]  Mengxuan Song,et al.  Structure optimization of parallel air-cooled battery thermal management system with U-type flow for cooling efficiency improvement , 2018 .

[89]  Guoqing Zhang,et al.  Experimental study on a novel battery thermal management technology based on low density polyethylene-enhanced composite phase change materials coupled with low fins , 2016 .

[90]  Yuying Yan,et al.  A critical review of thermal management models and solutions of lithium-ion batteries for the development of pure electric vehicles , 2016 .

[91]  Zhaohui Huang,et al.  Development of thermal equivalent circuit model of heat pipe-based thermal management system for a battery module with cylindrical cells , 2020 .

[92]  Ibrahim Dincer,et al.  Novel thermal management system using boiling cooling for high-powered lithium-ion battery packs for hybrid electric vehicles , 2017 .

[93]  Ralph E. White,et al.  Capacity fade analysis of a lithium ion cell , 2008 .

[94]  J. Selman,et al.  A novel thermal management system for electric vehicle batteries using phase-change material , 2000 .

[95]  Yuqing Wu,et al.  Analysis of Research and Development Trend of the Battery Technology in Electric Vehicle with the Perspective of Patent , 2017 .

[96]  I. Dincer,et al.  Heat and mass transfer modeling and assessment of a new battery cooling system , 2018, International Journal of Heat and Mass Transfer.

[97]  E Jiaqiang,et al.  Effects of different coolants and cooling strategies on the cooling performance of the power lithium ion battery system: A review , 2018, Applied Thermal Engineering.

[98]  Yangjun Zhang,et al.  Dynamic thermal behavior of micro heat pipe array-air cooling battery thermal management system based on thermal network model , 2019, Applied Thermal Engineering.

[99]  Zhonghao Rao,et al.  A review of power battery thermal energy management , 2011 .

[100]  Farid Nasir Ani,et al.  A review on two-phase ejector as an expansion device in vapor compression refrigeration cycle , 2012 .

[101]  Yongliang Li,et al.  Thermal performance of pouch Lithium-ion battery module cooled by phase change materials , 2019, Energy Procedia.

[102]  P. Novák,et al.  Memory effect in a lithium-ion battery. , 2013, Nature materials.

[103]  Rui Zhao,et al.  An experimental study of heat pipe thermal management system with wet cooling method for lithium ion batteries , 2015 .

[104]  Yi-Jun He,et al.  A unified modeling framework for lithium-ion batteries: An artificial neural network based thermal coupled equivalent circuit model approach , 2017 .

[105]  Huiming Zou,et al.  Experimental Study on a Dual- parallel-evaporator Heat Pump System for Thermal Management of Electric Vehicles , 2017 .

[106]  B. Kenney,et al.  Coupled electrochemical and thermal battery models for thermal management of prismatic automotive cells , 2018 .

[107]  Qingsong Wang,et al.  Numerical study on the thermal performance of a composite board in battery thermal management system , 2016 .

[108]  Liwen Jin,et al.  Parametric study of forced air cooling strategy for lithium-ion battery pack with staggered arrangement , 2018 .

[109]  Xin Ye,et al.  Experimental study on heat dissipation for lithium-ion battery based on micro heat pipe array (MHPA) , 2018 .

[110]  Lei Wang,et al.  Review on thermal management systems using phase change materials for electronic components, Li-ion batteries and photovoltaic modules , 2014 .

[111]  Cong Zhu,et al.  Development of a theoretically based thermal model for lithium ion battery pack , 2013 .

[112]  Andreas Jossen,et al.  Lithium plating in lithium-ion batteries at sub-ambient temperatures investigated by in situ neutron diffraction , 2014 .

[113]  Mingbiao Chen,et al.  Thermal equilibrium characteristic of large-size lithium-ion pouch battery: resting time between charge and discharge , 2019, Energy Procedia.

[114]  Xiaohuan Zhao,et al.  Modeling and characterization of the mass transfer and thermal mechanics of the power lithium manganate battery under charging process , 2019, Energy.

[115]  Yong Li,et al.  Sensitivity analysis of factors influencing a heat pipe-based thermal management system for a battery module with cylindrical cells , 2019, Applied Thermal Engineering.

[116]  Ibrahim Dincer,et al.  Thermal design and simulation of mini-channel cold plate for water cooled large sized prismatic lithium-ion battery , 2017 .

[117]  Chen Lin,et al.  Configuration optimization of battery pack in parallel air-cooled battery thermal management system using an optimization strategy , 2017 .

[118]  Said Al-Hallaj,et al.  An alternative cooling system to enhance the safety of Li-ion battery packs , 2009 .

[119]  Bruce J. Tatarchuk,et al.  Self-discharge characteristics and performance degradation of Ni-MH batteries for storage applications , 2014 .

[120]  Jennifer X. Wen,et al.  Modelling electro-thermal response of lithium-ion batteries from normal to abuse conditions , 2017 .

[121]  Bernard Sahut,et al.  Experimental investigation on heat pipe cooling for Hybrid Electric Vehicle and Electric Vehicle lithium-ion battery , 2014 .

[122]  M. Alipanah,et al.  Numerical studies of lithium-ion battery thermal management systems using phase change materials and metal foams , 2016 .

[123]  Zhuqian Zhang,et al.  Experimental and numerical study of a passive thermal management system using flat heat pipes for lithium-ion batteries , 2020 .

[124]  A. Roskilly,et al.  Study on the thermal interaction and heat dissipation of cylindrical Lithium-Ion Battery cells , 2017 .

[125]  Fangming Jiang,et al.  Experimental investigation on using the electric vehicle air conditioning system for lithium-ion battery thermal management , 2018, Energy for Sustainable Development.

[126]  Zhonghao Rao,et al.  Simulation and experiment of thermal energy management with phase change material for ageing LiFePO4 power battery , 2011 .

[127]  Liang Gao,et al.  A Comprehensive Approach for the Clustering of Similar-Performance Cells for the Design of a Lithium-Ion Battery Module for Electric Vehicles , 2019, Engineering.

[128]  Qingsong Wang,et al.  Thermal runaway caused fire and explosion of lithium ion battery , 2012 .

[129]  Mohammad Mehrali,et al.  Theoretical model of an evacuated tube heat pipe solar collector integrated with phase change material , 2015 .

[130]  Hassan Fathabadi,et al.  High thermal performance lithium-ion battery pack including hybrid active–passive thermal management system for using in hybrid/electric vehicles , 2014 .

[131]  Yang Wang,et al.  Research on the new-generation urban energy system in China , 2018, Energy Procedia.

[132]  Wenjiong Cao,et al.  Thermal modeling of full-size-scale cylindrical battery pack cooled by channeled liquid flow , 2019, International Journal of Heat and Mass Transfer.

[133]  G. Naterer,et al.  Numerical Modeling of Submodule Heat Transfer With Phase Change Material for Thermal Management of Electric Vehicle Battery Packs , 2015 .

[134]  Fei Yu,et al.  An explicit method to extract fitting parameters in lumped-parameter equivalent circuit model of industrial solar cells , 2020 .

[135]  Wen Tong Chong,et al.  Computational fluid dynamic and thermal analysis of Lithium-ion battery pack with air cooling , 2016 .

[136]  Song-Yul Choe,et al.  Electrochemical-thermal modeling of lithium plating/stripping of Li(Ni0.6Mn0.2Co0.2)O2/Carbon lithium-ion batteries at subzero ambient temperatures , 2019, Journal of Power Sources.

[137]  Yang Cai,et al.  Thermoelectric cooling technology applied in the field of electronic devices: Updated review on the parametric investigations and model developments , 2019, Applied Thermal Engineering.

[138]  Saffa Riffat,et al.  The latest advancements on thermochemical heat storage systems , 2015 .

[139]  Hewu Wang,et al.  Quantitative identification of emissions from abused prismatic Ni-rich lithium-ion batteries , 2019, eTransportation.

[140]  Kexiang Wei,et al.  Effects of different phase change material thermal management strategies on the cooling performance of the power lithium ion batteries: A review , 2019 .

[141]  A. Greco,et al.  A theoretical and computational study of lithium-ion battery thermal management for electric vehicles using heat pipes , 2014 .

[142]  Jiateng Zhao,et al.  Thermal performance of mini-channel liquid cooled cylinder based battery thermal management for cylindrical lithium-ion power battery , 2015 .

[143]  Boqiang Lin,et al.  How to promote the growth of new energy industry at different stages? , 2018, Energy Policy.

[144]  Zhengguo Zhang,et al.  A hybrid thermal management system for lithium ion batteries combining phase change materials with forced-air cooling , 2015 .

[145]  Chengyi Song,et al.  Temperature effect and thermal impact in lithium-ion batteries: A review , 2018, Progress in Natural Science: Materials International.

[146]  Christopher Yu Hang Chao,et al.  Experimental investigation of a passive thermal management system for high-powered lithium ion batteries using nickel foam-paraffin composite , 2016 .

[147]  W. Cheng,et al.  Thermal management of Li-ion battery pack with the application of flexible form-stable composite phase change materials , 2019, Energy Conversion and Management.

[148]  Carlos Bordons,et al.  Car air-conditioning considerations on hydrogen consumption in fuel cell and driving limitations , 2015 .

[149]  Lei Cao,et al.  A review on battery thermal management in electric vehicle application , 2017 .

[150]  Philippe Marty,et al.  Experimental performances of a battery thermal management system using a phase change material , 2014 .

[151]  M. A. Karri,et al.  Exhaust energy conversion by thermoelectric generator: Two case studies , 2011 .

[152]  Pan Mei,et al.  A novel approach for Lithium-ion battery thermal management with streamline shape mini channel cooling plates , 2019, Applied Thermal Engineering.

[153]  M. Schulz,et al.  In operando studies of rotating prismatic Li-ion batteries using monochromatic wide-angle neutron diffraction , 2019, Journal of Energy Storage.

[154]  Tao Wang,et al.  Thermal investigation of lithium-ion battery module with different cell arrangement structures and forced air-cooling strategies , 2014 .

[155]  B. Liaw,et al.  A review of lithium deposition in lithium-ion and lithium metal secondary batteries , 2014 .

[156]  Weixiong Wu,et al.  Experimental investigation on the thermal performance of heat pipe-assisted phase change material based battery thermal management system , 2017 .

[157]  Choi Yong-Seok,et al.  Prediction of thermal behaviors of an air-cooled lithium-ion battery system for hybrid electric vehicles , 2014 .

[158]  T. Fuller,et al.  A Critical Review of Thermal Issues in Lithium-Ion Batteries , 2011 .

[159]  Jian Qu,et al.  Heat transfer characteristics of plug-in oscillating heat pipe with binary-fluid mixtures for electric vehicle battery thermal management , 2019, International Journal of Heat and Mass Transfer.

[160]  Peter Kritzer,et al.  Improved Safety for Automotive Lithium Batteries: An Innovative Approach to include an Emergency Cooling Element , 2014 .

[161]  Andrew Mills,et al.  Simulation of passive thermal management system for lithium-ion battery packs , 2005 .

[162]  Ken Darcovich,et al.  Comparison of cooling plate configurations for automotive battery pack thermal management , 2019, Applied Thermal Engineering.

[163]  Rui Liu,et al.  Numerical and analytical modeling of lithium ion battery thermal behaviors with different cooling designs , 2013 .

[164]  Yanbao Ma,et al.  A parametric study for optimization of minichannel based battery thermal management system , 2019, Applied Thermal Engineering.

[165]  Liwen Jin,et al.  Thermal Management of Densely-packed EV Battery with Forced Air Cooling Strategies , 2016 .

[166]  Chakib Alaoui,et al.  Solid-State Thermal Management for Lithium-Ion EV Batteries , 2013, IEEE Transactions on Vehicular Technology.

[167]  Taylor D. Sparks,et al.  Cold temperature performance of phase change material based battery thermal management systems , 2015, Energy Reports.

[168]  M. Fowler,et al.  Electrochemical-thermal modeling and experimental validation of commercial graphite/LiFePO 4 pouch lithium-ion batteries , 2018, International Journal of Thermal Sciences.

[169]  Siaw Kiang Chou,et al.  Ultra-thin minichannel LCP for EV battery thermal management , 2014 .

[170]  Datong Qin,et al.  Effect of energy-regenerative braking on electric vehicle battery thermal management and control method based on simulation investigation , 2015 .

[171]  Y. Wang,et al.  Performance assessment and parametric study of a hybrid system consisting of an alkali metal thermoelectric converter and an absorption refrigerator , 2019, Energy Conversion and Management.

[172]  Shaohua Lin,et al.  A linear parameter-varying model for HEV/EV battery thermal modeling , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).

[173]  Guoqing Zhang,et al.  Experimental examination of large capacity liFePO4 battery pack at high temperature and rapid discharge using novel liquid cooling strategy , 2018 .

[174]  T. L. Bergman,et al.  Enhancement of latent heat energy storage using embedded heat pipes , 2011 .