A prototype design model for deep low-enthalpy hydrothermal systems

This paper introduces a prototype design model for deep low-enthalpy hydrothermal systems. The model predicts, empirically, the lifetime of a hydrothermal system as a function of reservoir porosity, discharge rate, well spacing, average initial temperature of the reservoir, and injection temperature. The finite element method is utilized for this purpose. An extensive parametric analysis on a wide range of physical parameters and operational scenarios, for a typical geometry, has been conducted to derive the model. The proposed model can provide geothermal engineers and decision makers with a preliminary conjecture about the lifetime of a deep low-enthalpy hydrothermal system. The proposed modelling technique can be utilized as a base to derive elaborate models that include more parameters and operational scenarios.

[1]  Darius Mottaghy,et al.  Modeling contribution to risk assessment of thermal production power for geothermal reservoirs , 2013 .

[2]  Louis J. Durlofsky,et al.  A fully-coupled thermal multiphase wellbore flow model for use in reservoir simulation , 2010 .

[3]  Olaf Kolditz,et al.  Uncertainty analysis of thermo-hydro-mechanical coupled processes in heterogeneous porous media , 2010 .

[4]  James P. Brill,et al.  Multiphase Flow in Wells , 1987 .

[5]  Darius Mottaghy,et al.  The geothermal project Den Haag: 3D numerical models for temperature prediction and reservoir simula , 2011 .

[6]  H. Nick,et al.  Modeling Transverse Dispersion and Variable Density Flow in Porous Media , 2009 .

[7]  Ki-Bok Min,et al.  Determination of optimum parameters of doublet system in a horizontally fractured geothermal reservoir , 2012 .

[8]  Günter Zimmermann,et al.  3D numerical modeling of hydrothermal processes during the lifetime of a deep geothermal reservoir , 2010 .

[9]  Sanaz Saeid,et al.  An efficient computational model for deep low-enthalpy geothermal systems , 2013, Comput. Geosci..

[10]  A. Gringarten,et al.  Lifetime Optimization of Low Enthalpy Geothermal Doublets , 1980 .

[11]  Maurizio Vaccaro,et al.  Numerical simulation of geothermal reservoirs for the sustainable design of energy plants: A review , 2014 .

[12]  R. C. Weast.  CRC Handbook of Chemistry and Physics , 1973 .

[13]  S. Lin,et al.  Local frictional pressure drop during vaporization of R-12 through capillary tubes , 1991 .

[14]  S. Fuchs,et al.  Deep 3D thermal modelling for the city of Berlin (Germany) , 2013, Environmental Earth Sciences.

[15]  C. Zheng,et al.  Effects of Density and Viscosity in Modeling Heat as a Groundwater Tracer , 2009, Ground water.

[16]  S. Bachu,et al.  Equations of state for basin geofluids: algorithm review and intercomparison for brines , 2002 .

[17]  R. Al-Khoury,et al.  Experimental–numerical study of heat flow in deep low-enthalpy geothermal conditions , 2014 .

[18]  Zhijing Wang,et al.  Seismic properties of pore fluids , 1992 .