论文信息 - Highly sensitive fiber optic inclinometer: easy to transport and easy to install

Highly sensitive fiber optic inclinometer: easy to transport and easy to install

We present the status of our work on a tube shaped 3D deformation sensor based on continuously distributed fiber optic sensing. A sensor tube of very large diameter is used to ensure high sensitivity while the transportability and applicability are still comfortable due to our application strategy. The setup is designed to use different measurement techniques in the applied optical fibers including Brillouin based measurements and interferometric optical frequency domain measurements using an OBR 4400 from Luna Technologies.

Katerina Krebber | Philipp Lenke | Mario Wendt | Rainer Glötzl

[1] P. Ferdinand,et al. Brillouin optical fiber distributed sensor for settlement monitoring while tunneling the metro line 3 in Cairo, Egypt , 2009, International Conference on Optical Fibre Sensors.

[2] Fotios Sidiroglou,et al. Temperature independent bend measurement using a pi-phase shifted FBG at twice the Bragg wavelength , 2010, European Workshop on Optical Fibre Sensors.

[3] Stephen W. James,et al. A fibre Bragg grating-based inclinometer system for ground movement measurement , 2010, European Workshop on Optical Fibre Sensors.

[4] L. M. N. Amaral,et al. Optical inclinometer based on fibre-taper-modal Michelson interferometer , 2010, European Workshop on Optical Fibre Sensors.