Increasing the efficiency of a portable PEM fuel cell by altering the cathode channel geometry: A numerical and experimental study

Portable fuel cells are receiving great attention today mainly because their energy density is higher than any portable battery solution. Among other types, portable polymer electrolyte membrane (PEM) fuel cells are an established technology where research on increasing their efficiency is leading product development and manufacturing. The objective of this work was to study and evaluate the redesign of a commercial portable fuel cell, improving its efficiency. A three-dimensional model of the original PEM fuel cell with parallel plus a transversal flow channel design was developed using Comsol Multiphysics, including the effects of liquid water formation and electric current production. Using this model, the effects of different channel geometries and respective cathode flow rates on the cell's performance, including the local transport characteristics, were studied. Laboratory tests with various fuel cell stacks using the new channels structure were effectuated for an evaluation of the fuel cell's performance, showing improvements in its efficiency of up to 26.4%.

[1]  Yun Wang,et al.  Modeling of two-phase transport in the diffusion media of polymer electrolyte fuel cells , 2008 .

[2]  Jean Hamelin,et al.  Performance Comparison Between Planar and Tubular‐Shaped PEM Fuel Cells by Three‐Dimensional Numerical Simulation , 2003 .

[3]  Christoph Ziegler,et al.  Computationally efficient modeling of the dynamic behavior of a portable PEM fuel cell stack , 2008 .

[4]  S. R. Shaw,et al.  A dynamic PEM fuel cell model , 2006, IEEE Transactions on Energy Conversion.

[5]  Shiauh-Ping Jung,et al.  Flow distribution in the manifold of PEM fuel cell stack , 2007 .

[6]  Horng-Wen Wu,et al.  Numerical predictions of a PEM fuel cell performance enhancement by a rectangular cylinder installed transversely in the flow channel , 2009 .

[7]  Sadik Kakac,et al.  Two‐dimensional model for proton exchange membrane fuel cells , 1998 .

[8]  A. Rufer,et al.  A Fully Analytical PEM Fuel Cell System Model for Control Applications , 2006, IEEE Transactions on Industry Applications.

[9]  Jae Hyuk Jang,et al.  Micro-fuel cells—Current development and applications , 2007 .

[10]  Fausto Posso,et al.  Modelling and simulation of the utilization of a PEM fuel cell in the rural sector of Venezuela , 2010 .

[11]  Xianguo Li,et al.  Experimental investigations on liquid water removal from the gas diffusion layer by reactant flow in a PEM fuel cell , 2010 .

[12]  Roger A. Dougal,et al.  A Compact Digitally Controlled Fuel Cell/Battery Hybrid Power Source , 2006, IEEE Transactions on Industrial Electronics.

[13]  Xinbo Ruan,et al.  Hybrid Full-Bridge Three-Level LLC Resonant Converter- A Novel DC-DC Converter Suitable for Fuel Cell Power System , 2005, 2005 IEEE 36th Power Electronics Specialists Conference.

[14]  K. Cowey,et al.  Portable and military fuel cells , 2004 .

[15]  Keri Allen.  Promoting portable power , 2006 .

[16]  Suman Basu,et al.  Modeling two-phase flow in PEM fuel cell channels , 2008 .

[17]  C. Siegel.  Review of computational heat and mass transfer modeling in polymer-electrolyte-membrane (PEM) fuel cells , 2008 .

[18]  Wei-Mon Yan,et al.  Convenient two-dimensional model for design of fuel channels for proton exchange membrane fuel cells , 2004 .

[19]  Phatiphat Thounthong,et al.  Control Strategy of Fuel Cell and Supercapacitors Association for a Distributed Generation System , 2007, IEEE Transactions on Industrial Electronics.

[20]  Ugo Icardi,et al.  Compact direct methanol fuel cells for portable application , 2008 .

[21]  Mohammad S. Alam,et al.  Dynamic modeling and simulation of air-breathing proton exchange membrane fuel cell , 2008 .

[22]  Maurizio Cirrincione,et al.  A prototype of a fuel cell PEM emulator based on a buck converter , 2009 .

[23]  Chao-Yang Wang,et al.  Simulation of flow and transport phenomena in a polymer electrolyte fuel cell under low-humidity operation , 2005 .

[24]  Mohammad S. Alam,et al.  Reliability and availability analysis of low power portable direct methanol fuel cells , 2008 .

[25]  P. Enjeti,et al.  Design considerations for a fuel cell powered dc-dc converter for portable applications , 2006, Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, 2006. APEC '06..

[26]  C. Hebling,et al.  Portable proton exchange membrane fuel-cell systems for outdoor applications , 2006 .

[27]  Xianguo Li,et al.  A comprehensive, consistent and systematic mathematical model of PEM fuel cells , 2009 .

[28]  P.L. Chapman,et al.  Mass-Optimal Design Methodology for DC-DC Converters in Low-Power Portable Fuel Cell Applications , 2008, IEEE Transactions on Power Electronics.

[29]  Ned Djilali,et al.  CFD-based modelling of proton exchange membrane fuel cells , 2005 .

[30]  Prasad N. Enjeti,et al.  Design of a wide input range DC-DC converter with a robust power control scheme suitable for fuel cell power conversion , 2004, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2004. APEC '04..

[31]  Srdjan M. Lukic,et al.  Energy Storage Systems for Automotive Applications , 2008, IEEE Transactions on Industrial Electronics.

[32]  Paolo Agnolucci,et al.  ECONOMICS AND MARKET PROSPECTS OF PORTABLE FUEL CELLS , 2007, Proceeding of World Congress of Young Scientists on Hydrogen Energy Systems.

[33]  Luciane Neves Canha,et al.  An electrochemical-based fuel-cell model suitable for electrical engineering automation approach , 2004, IEEE Transactions on Industrial Electronics.

[34]  N.S. Sisworahardjo,et al.  Reliability and Sensitivity Analysis of Low Power Portable Direct Methanol Fuel Cell , 2007, EUROCON 2007 - The International Conference on "Computer as a Tool".

[35]  Jorge L. Duarte,et al.  Line-Interactive UPS Using a Fuel Cell as the Primary Source , 2008, IEEE Transactions on Industrial Electronics.

[36]  Chao-Yang Wang,et al.  Computational Fluid Dynamics Modeling of Proton Exchange Membrane Fuel Cells , 2000 .

[37]  Daniel Hissel,et al.  Energy-Management Strategy for Embedded Fuel-Cell Systems Using Fuzzy Logic , 2007, IEEE Transactions on Industrial Electronics.

[38]  Chao-Yang Wang,et al.  Modeling Polymer Electrolyte Fuel Cells with Large Density and Velocity Changes , 2005 .

[39]  Daniel Hissel,et al.  Power generation by fuel cells , 2007, IEEE Industrial Electronics Magazine.

[40]  M.G. Simoes,et al.  Sensitivity analysis of the modeling parameters used in Simulation of proton exchange membrane fuel cells , 2005, IEEE Transactions on Energy Conversion.

[41]  A. A. Kulikovsky,et al.  Quasi-3D Modeling of Water Transport in Polymer Electrolyte Fuel Cells , 2003 .

[42]  Ulrich Stimming,et al.  Developments for Improved Direct Methanol Fuel Cell Stacks for Portable Power , 2007 .