Modelling the three-dimensional behaviour of shallow rolling contact fatigue cracks in rails

Abstract A model of the fatigue behaviour of three-dimensional (3D) semi-elliptical shallow-angle rolling contact fatigue (RCF) cracks was developed by combining numerically obtained (3D FEM) linear elastic fracture mechanics (LEFM) crack front loading histories with mixed-mode fatigue crack growth rate data. The model was applied for the “squat” type of crack—typical of rail RCF failure, to predict (i) shape development, (ii) co-planar extension, (iii) spalling, and (iv) branching to transverse defects. The model demonstrated that propagation of “squats” under the rail surface is feasible when a fluid entrapment mechanism is introduced, encouraging a mixed-mode shear dominated growth. However, cracks may branch to a Mode I direction when the residual stress, crack inclination and braking force create favourable conditions.

[1]  Chun H. Wang,et al.  Life Prediction Techniques for Variable Amplitude Multiaxial Fatigue—Part 2: Comparison With Experimental Results , 1996 .

[2]  S-B Lee,et al.  A Criterion for Fully Reversed Out-of-Phase Torsion and Bending , 1985 .

[3]  M. Kaneta,et al.  Propagation of Semi-Elliptical Surface Cracks in Lubricated Rolling/Sliding Elliptical Contacts , 1991 .

[4]  M. W. Brown,et al.  A branch criterion for shallow angled rolling contact fatigue cracks in rails , 1996 .

[5]  M. D. Bryant,et al.  A Pitting Model for Rolling Contact Fatigue , 1983 .

[6]  A. Bower.  The influence of crack face friction and trapped fluid on surface initiated rolling contact fatigue cracks , 1988 .

[7]  K. Hsia,et al.  A Numerical Solution of a Surface Crack Under Cyclic Hydraulic Pressure Loading , 1996 .

[8]  S. Bogdański,et al.  Numerical stress analysis of rail rolling contact fatigue cracks , 1996 .

[9]  Anthony W. Thompson,et al.  Fatigue Crack Growth in Rail Steels , 1993 .

[10]  K. Hsia,et al.  The mathematical framework and an approximate solution of surface crack propagation under hydraulic pressure loading , 1996 .

[11]  Stanisław Bogdański,et al.  Numerical modelling of a 3D rail RCF 'squat'-type crack under operating load , 1998 .

[12]  Chun H. Wang,et al.  Life Prediction Techniques for Variable Amplitude Multiaxial Fatigue—Part 1: Theories , 1996 .

[13]  M. W. Brown,et al.  Shear mode crack growth and rolling contact fatigue , 1991 .

[14]  Stanisław Bogdański.  Finite Element Modelling of Surface Fatigue Crack in EHD Contact , 1997 .

[15]  I. N. Sneddon.  The distribution of stress in the neighbourhood of a crack in an elastic solid , 1946, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.