Microstructure and mechanical properties of SiC particle reinforced Zr-based metallic glass surface composite layers produced by laser alloying

[1]  V.A.M. Cristino,et al.  Laser surface alloying of copper with Cr/Ti/CNT for enhancing surface properties , 2022, Journal of Materials Research and Technology.

[2]  Jiwang Yan,et al.  Microstructures and mechanical properties of Zr-based metallic glass ablated by nanosecond pulsed laser in various gas atmospheres , 2022, Journal of Alloys and Compounds.

[3]  Zhiyu Zhang,et al.  Formation of leaf-shaped microstructure on Zr-based metallic glass via nanosecond pulsed laser irradiation , 2021, Journal of Manufacturing Processes.

[4]  J. S. Binoj,et al.  Influence of SiC micro and nano particles on tribological, water absorption and mechanical properties of basalt bidirectional mat/vinyl ester composites , 2021, Composites Science and Technology.

[5]  D. Raabe,et al.  Substantially enhanced plasticity of bulk metallic glasses by densifying local atomic packing , 2021, Nature Communications.

[6]  J. Schroers,et al.  Data-driven discovery of a universal indicator for metallic glass forming ability , 2021, Nature Materials.

[7]  Jiwang Yan,et al.  Nanosecond pulsed laser-induced formation of nanopattern on Fe-based metallic glass surface , 2021, Applied Surface Science.

[8]  Peijun Hou,et al.  Printability of Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 metallic glass on steel by laser additive manufacturing: A single-track study , 2021, Surface and Coatings Technology.

[9]  F. Weng,et al.  In situ formed TiB2/TiC complex structure in laser-alloyed coatings with improved wear property , 2021, Ceramics International.

[10]  Jiwang Yan,et al.  Laser nitriding of Zr-based metallic glass: An investigation by orthogonal experiments , 2021 .

[11]  D. Gu,et al.  CuZr-based bulk metallic glass and glass matrix composites fabricated by selective laser melting , 2021 .

[12]  P. Bai,et al.  Microstructure evolution and high-temperature oxidation behavior of FeCrAlNbNi alloyed zone prepared by laser surface alloying on 304 stainless steel , 2021 .

[13]  Yunzhuo Lu,et al.  Accelerated exploration of TRIP metallic glass composite by laser additive manufacturing , 2021, Journal of Materials Science & Technology.

[14]  S. Pauly,et al.  3D printing of bulk metallic glasses , 2021, Materials Science and Engineering: R: Reports.

[15]  H. Wei,et al.  Printability assessment with porosity and solidification cracking susceptibilities for a high strength aluminum alloy during laser powder bed fusion , 2021 .

[16]  F. Sadeghi,et al.  An approach for predicting failure mechanism in rough surface rolling contact fatigue , 2021 .

[17]  Huie Hu,et al.  Preparation and mechanical properties of tungsten-particle-reinforced Zr-based bulk-metallic-glass composites , 2021 .

[18]  Hejun Li,et al.  Simultaneous enhancement of mechanical and electrical/thermal properties of carbon fiber/polymer composites via SiC nanowires/graphene hybrid nanofillers , 2021 .

[19]  Xin Lin,et al.  Effect of Cu content on microstructure and mechanical properties of in-situ β phases reinforced Ti/Zr-based bulk metallic glass matrix composite by selective laser melting (SLM) , 2021, Journal of Materials Science & Technology.

[20]  Wei Guo,et al.  In situ Fe-rich particle reinforced Mg-based metallic glass matrix composites via dealloying in metallic melt , 2021 .

[21]  A. Ambroziak,et al.  Characterization of FeP-based metallic glass coatings prepared with laser cladding , 2021 .

[22]  Jiwang Yan,et al.  Laser induced micro-cracking of Zr-based metallic glass using 1011 W/m2 nano-pulses , 2020 .

[23]  Haiyang Li,et al.  Dynamic compressive mechanical properties of the spiral tungsten wire reinforced Zr-based bulk metallic glass composites , 2020, Composites Part B: Engineering.

[24]  J. Krell,et al.  Influence of precipitation hardening on the high-temperature sliding wear resistance of an aluminium alloyed iron-nickel base alloy , 2020 .

[25]  T. Lee,et al.  Developing a new laser cladded FeCrMoCB metallic glass layer on nickel-free stainless-steel as a potential superior wear-resistant coating for joint replacement implants , 2020, Surface and Coatings Technology.

[26]  Mehdi Shahedi Asl,et al.  Combined role of SiC particles and SiC whiskers on the characteristics of spark plasma sintered ZrB2 ceramics , 2020 .

[27]  A. L. Greer,et al.  Strain-hardening and suppression of shear-banding in rejuvenated bulk metallic glass , 2020, Nature.

[28]  G. Tosun,et al.  The porosity, microstructure, and hardness of Al-Mg composites reinforced with micro particle SiC/Al2O3 produced using powder metallurgy , 2019, Composites Part B: Engineering.

[29]  Chunhong Li,et al.  Nanosecond laser-induced surface damage and material failure mechanism of single crystal CaF2 (111) at 355 nm , 2019, Applied Surface Science.

[30]  P. Xiao,et al.  A new slurry infiltration method to enhance the wear resistance of bulk graphite with development of reinforced graphitic composites including SiC or Si3N4 hard particles , 2019, Journal of the European Ceramic Society.

[31]  U. Ramamurty,et al.  Tuning the microstructure and metastability of β-Ti for simultaneous enhancement of strength and ductility of Ti-based bulk metallic glass composites , 2019, Acta Materialia.

[32]  Jiwang Yan,et al.  The coupling effects of laser thermal shock and surface nitridation on mechanical properties of Zr-based metallic glass , 2019, Journal of Alloys and Compounds.

[33]  H. Ke,et al.  U-involved sphere-dispersed metallic glass matrix composites , 2018, Materials & Design.

[34]  Haifeng Zhang,et al.  Developing β-type bulk metallic glass composites from Ti/Zr-based bulk metallic glasses by an iteration method , 2018 .

[35]  Zhihua Wang,et al.  Shear softening of Ta-containing metallic glass matrix composites upon dynamic loading , 2017 .

[36]  R. Hellmann,et al.  A study of SiC decomposition under laser irradiation , 2017 .

[37]  P. Liaw,et al.  The corrosion behavior of in-situ Zr-based metallic glass matrix composites in different corrosive media , 2016 .

[38]  Junwei Qiao,et al.  Metallic glass matrix composites , 2016 .

[39]  Moataz M. Attallah,et al.  On the role of melt flow into the surface structure and porosity development during selective laser melting , 2015 .

[40]  L. Dai,et al.  Collective evolution dynamics of multiple shear bands in bulk metallic glasses , 2013 .

[41]  Moataz M. Attallah,et al.  Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti–6Al–4V , 2013 .

[42]  A Hirata,et al.  Geometric Frustration of Icosahedron in Metallic Glasses , 2013, Science.

[43]  E-Wen Huang,et al.  Tensile deformation micromechanisms for bulk metallic glass matrix composites: From work-hardening to softening , 2011 .

[44]  A. Takeuchi,et al.  Recent development and application products of bulk glassy alloys , 2011 .

[45]  A. Inoue,et al.  New Bulk Metallic Glasses for Applications as Magnetic-Sensing, Chemical, and Structural Materials , 2007 .

[46]  M. Telford The case for bulk metallic glass , 2004 .

[47]  I. Hutchings,et al.  Wear resistance of amorphous alloys and related materials , 2002 .

[48]  Y. Golovin,et al.  Serrated plastic flow during nanoindentation of a bulk metallic glass , 2001 .

[49]  James K. Guest,et al.  Topology-optimized bulk metallic glass cellular materials for energy absorption , 2022, Scripta Materialia.

[50]  Xue-jian Liu,et al.  Vickers indentation crack analysis of solid-phase-sintered silicon carbide ceramics , 2013 .