Parametric Analysis of Piston Assembly Focusing on Friction Losses Reduction and Fuel Consumption

[1]  V. Wong,et al.  Effects of Piston Design Parameters on Piston Secondary Motion and Skirt - Liner Friction , 2005 .

[2]  K. Johnson.  Contact Mechanics: Frontmatter , 1985 .

[3]  John B. Heywood,et al.  Internal combustion engine fundamentals , 1988 .

[4]  Riaz A. Mufti,et al.  Experimental Evaluation of Piston-Assembly Friction Under Motored and Fired Conditions in a Gasoline Engine , 2005 .

[5]  K. Liu,et al.  A comprehensive study of the friction and dynamic motion of the piston assembly , 1998 .

[6]  Masaaki Takiguchi,et al.  The Effects of Crank Ratio and Crankshaft Offset on Piston Friction Losses , 2003 .

[7]  Takayuki Arai,et al.  A Numerical Analysis for Piston Skirts in Mixed Lubrication: Part II—Deformation Considerations , 1993 .

[8]  Kazuo Nakano,et al.  Development of Toyota 1ZZ-FE Engine , 1998 .

[9]  Kyugo Hamai,et al.  A Numerical Analysis for Piston Skirts in Mixed Lubrication—Part I: Basic Modeling , 1992 .

[10]  Nikolaos P. Kyrtatos,et al.  Friction model of a marine diesel engine piston assembly , 2007 .

[11]  H. Cheng,et al.  An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic Lubrication , 1978 .

[12]  Homer Rahnejat,et al.  Isothermal transient analysis of piston skirt-to-cylinder wall contacts under combined axial, lateral and tilting motion , 2005 .

[13]  Y-Z Hu,et al.  Thermo-elasto-hydrodynamic lubrication analysis of piston skirt considering oil film inertia effect , 2007 .