Impact of local urban design and traffic restrictions on air quality in a medium-sized town

Traffic is the major air pollution source in most urban areas. Nowadays, most of the strategies carried out to improve urban air quality are focused on reducing traffic emissions. Nevertheless, acting locally on urban design can also reduce levels of air pollutants. In this paper, both strategies are studied in several scenarios for a medium-sized town of the Basque Country (Spain). Two main actions are analysed in order to reduce traffic emissions: (1) minor extension of a pre-existing low emission zone (LEZ); (2) substitution of 10% of passenger cars that are older than 5 years by hybrid and electric vehicles. Regarding local urban design, three alternatives for the development of one side of a street canyon are considered: (1) a park with trees; (2) an open space without obstacles; (3) a building. Two different urban traffic dispersion models are used to calculate the air quality scenarios: PROKAS (Gaussian&box) to analyse the reduction of traffic emissions in the whole urban area and WinMISKAM (CFD) to evaluate specific urban designs. The results show the effectiveness of the analysed actions. On one hand, the definition of a small LEZ, as well as the introduction in 2015 of vehicles with new technology (hybrid and electric), results in minor impacts on PM 10 and NO 2 ambient concentrations. On the other hand, local urban design can cause significant variation in spatial distribution of pollutant concentrations emitted inside street canyons. Consequently, urban planners should consider all these aspects when dealing with urban air pollution control.

[1]  Riccardo Buccolieri,et al.  Dispersion study in a street canyon with tree planting by means of wind tunnel and numerical investigations – Evaluation of CFD data with experimental data , 2008 .

[2]  J Eichhorn,et al.  WINMISKAM 4.2, MICROSCALE FLOW AND DISPERSION MODEL FOR BUILT UP AREAS, RECENT DEVELOPMENTS , 2002 .

[3]  R. Berkowicz Modelling street canyon pollution: model requirements and expectations , 2014 .

[4]  M. Khare,et al.  Modelling of vehicular exhausts – a review , 2001 .

[5]  Zhen Huang,et al.  Impact of building configuration on air quality in street canyon , 2005 .

[6]  K. P. Beckett,et al.  Urban woodlands: their role in reducing the effects of particulate pollution. , 1998, Environmental pollution.

[7]  T. J. Lyons,et al.  Evaluation of results of a numerical simulation of dispersion in an idealised urban area for emergency response modelling , 2009 .

[8]  D. Grawe,et al.  BEST PRACTICE GUIDELINE FOR THE CFD SIMULATION OF FLOWS IN THE URBAN ENVIRONMENT , 2007 .

[9]  F. Escobedo,et al.  Spatial heterogeneity and air pollution removal by an urban forest , 2009 .

[10]  Matthias Ketzel,et al.  Comparison of Numerical Street Dispersion Models with Results from Wind Tunnel and Field Measurements , 2000 .

[11]  R. Ruhnke,et al.  NO-NO2-conversion model for application to forecast air pollutions due to automobile exhaust - NO-NO2-Umwandlung für die Anwendung bei Immissionsprognosen für Kfz-Abgase , 1996 .

[12]  Other COMMUNICATION FROM THE COMMISSION TO THE COUNCIL AND THE EUROPEAN PARLIAMENT , 2003 .

[13]  J. Lodge Air quality guidelines for Europe: WHO regional publications, European series, No. 23, World Health Organization, 1211 Geneva 27, Switzerland; WHO publications center USA, 49 Sheridan Avenue, Albany, NY 12210, 1987, xiii + 426 pp. price: Sw. fr. 60 , 1988 .

[14]  J. C. Stevens,et al.  Air pollution removal by urban trees and shrubs in the United States , 2006 .

[15]  R. Newman Promotion of the use of energy from renewable sources , 2014 .

[16]  A. Schrijver,et al.  The impact of forest edge structure on longitudinal patterns of deposition, wind speed, and turbulence , 2008 .

[17]  Márton Balczó,et al.  Numerical modeling of flow and pollutant dispersion in street canyons with tree planting , 2009 .

[18]  Matthias Ketzel,et al.  Validation of OML, AERMOD/PRIME and MISKAM Using the Thompson Wind-Tunnel Dataset for Simple Stack-Building Configurations , 2009 .

[19]  Gail Taylor,et al.  Particulate pollution capture by urban trees: effect of species and windspeed , 2000 .

[20]  R. Britter,et al.  Optimisation of modelling methods for traffic pollution in streets , 2004 .

[21]  Alison S. Tomlin,et al.  Evaluation of a turbulent flow and dispersion model in a typical street canyon in York, UK , 2006 .

[22]  C. N. Hewitt,et al.  Quantifying the effect of urban tree planting on concentrations and depositions of PM10 in two UK conurbations , 2007 .

[23]  J. Eichhorn Validation of a Microscale Pollution Dispersal Model , 1996 .

[24]  K. Pericleous,et al.  Modelling air quality in street canyons : a review , 2003 .

[25]  A. Chan,et al.  Strategic guidelines for street canyon geometry to achieve sustainable street air quality—part II: multiple canopies and canyons , 2003 .

[26]  Michael Schatzmann,et al.  Meteorology applied to urban air pollution problems: COST 715 , 2001 .

[27]  Screening and Scenarios of Traffic Emissions at Trier, Germany , 2004, Environmental science and pollution research international.

[28]  Jörg Franke,et al.  The COST 732 Best Practice Guideline for CFD simulation of flows in the urban environment: a summary , 2011 .

[29]  R. Berkowicz,et al.  Modelling traffic pollution in streets , 2001 .

[30]  Bodo Ruck,et al.  On the Impact of Trees on Dispersion Processes of Traffic Emissions in Street Canyons , 2009 .

[31]  J M Baldasano,et al.  A comprehensive assessment of PM emissions from paved roads: real-world Emission Factors and intense street cleaning trials. , 2010, The Science of the total environment.

[32]  J. Baldasano,et al.  Emissions variation in urban areas resulting from the introduction of natural gas vehicles: application to Barcelona and Madrid greater areas (Spain). , 2009, The Science of the total environment.