Comparison of Methodologies for Acid Buffering Capacity Determination—Empirical Verification of Models

[1]  Ken Watanabe,et al.  Predicting internal bond strength of particleboard under outdoor exposure based on climate data: comparison of multiple linear regression and artificial neural network , 2014, Journal of Wood Science.

[2]  C. Bismarck,et al.  Formaldehydabgabe und Festigkeitsausbildung bei der Verleimung von Eichenspänen mit Harnstofformaldehydharzen , 1975, Holz als Roh- und Werkstoff.

[3]  M. Irle,et al.  The acidity of stored sitka spruce chips , 2009, Holz als Roh- und Werkstoff.

[4]  S. Adamopoulos,et al.  Extractives, acidity, buffering capacity, ash and inorganic elements of black locust wood and bark of different clones and origin , 2008, Holz als Roh- und Werkstoff.

[5]  S. Y. Zhang,et al.  Effect of wood acidity and catalyst on UF resin gel time , 2004 .

[6]  M. Mamiński,et al.  A Critical Role for the Presence of Lignocellulosic Material in the Determination of Wood Buffering Capacity , 2017 .

[7]  G. Halász,et al.  Radial variation of pH and buffer capacity in the red-heartwooded beech (Fagus silvatica L.) wood , 1999, Holz als Roh- und Werkstoff.

[8]  E. Roffael.  Significance of wood extractives for wood bonding , 2015, Applied Microbiology and Biotechnology.

[9]  F. Gaucheron,et al.  Buffering capacity of dairy products , 2005 .

[10]  V. Hernández.  Radiata pine pH and buffering capacity: Effect of age and location in the stem , 2013 .

[11]  B. Jenkins,et al.  Physical properties of thin particleboard made from saline eucalyptus , 2007 .

[12]  A. R. Haftkhani,et al.  Improve regression-based models for prediction of internal-bond strength of particleboard using Buckingham’s pi-theorem , 2013, Journal of Forestry Research.

[13]  N. Parameswaran,et al.  Kenntnisstand und Untersuchungsergebnisse zur Wirkung von Ammoniak auf Holzspäne , 1984, Holz als Roh- und Werkstoff.

[14]  Shigehiko Suzuki,et al.  Effect of element type on the internal bond quality of wood-based panels determined by three methods , 2003, Journal of Wood Science.

[15]  K. Somasekharan,et al.  Acidity of Wood , 1983 .

[16]  W. Johns,et al.  Effect of pH and buffering capacity of wood on the gelation time of urea-formaldehyde resin. , 1980 .

[17]  Kushairi Mohd Salleh,et al.  Effect of treated particles on the properties of particleboard made from oil palm trunk , 2014 .

[18]  M. Tuominen,et al.  Determination of the internal bond of particleboard and fibreboard , 1980, Holz als Roh- und Werkstoff.

[19]  B. Riedl,et al.  Measurement of wood and bark particles acidity and their impact on the curing of urea formaldehyde resin during the hot pressing of mixed panels , 2008, Holz als Roh- und Werkstoff.

[20]  Ravindra V. Gadhave,et al.  Factor Affecting Gel Time/Process-Ability of Urea Formaldehyde Resin Based Wood Adhesives , 2017 .

[21]  M. Balaban,et al.  The correlation of wood acidity to its solubility by hot water and alkali , 2001, Holz als Roh- und Werkstoff.