On thermo-mechanical reliability of plated-through-hole (PTH)

Abstract The mechanical properties of plated copper in plated-through-hole (PTH) were investigated experimentally by a thermo-mechanical analyzer, a nano-indenter, and an acoustic emission instrument. Coefficients of fatigue life prediction models for plated copper have been determined by different failure criteria. Afterwards thermal fatigue test of PTH at three different diameters were performed, and Weibull statistics was employed to evaluate the fatigue life of samples under different failure criteria. Finally, the strain variation of PTH during thermal cycle has been simulated by the finite element analysis (FEA) so as to predict its fatigue life by the selected models. From the comparison of the estimated fatigue life and its experimental results, it is found that the error can be minimized to be within 100%, provided that the drifting of electrical resistance by 20% is used as failure criteria and total strain amplitude is used as control variable in fatigue life prediction model. Based on these findings, design of PTH in printed circuit board (PCB) can be optimized by FEA. It is concluded that fatigue life of PTH will increase with lesser PCB layers, smaller depth-to-diameter ratio, higher PTH density and thicker plated copper.

[1]  E. Fatas,et al.  Mechanical and structural properties of electrodeposited copper and their relation with the electrodeposition parameters , 2005 .

[2]  J. Pang,et al.  Low cycle fatigue study of lead free 99.3Sn–0.7Cu solder alloy , 2004 .

[3]  D. Dimiduk,et al.  Sample Dimensions Influence Strength and Crystal Plasticity , 2004, Science.

[4]  Julia R. Greer,et al.  Deformation at the nanometer and micrometer length scales: Effects of strain gradients and dislocation starvation , 2007 .

[5]  D. Read,et al.  Morphology, microstructure, and mechanical properties of a copper electrodeposit , 2004 .

[6]  David L. McDowell,et al.  Thermal stress and fatigue analysis of plated-through holes using an internal state variable constitutive model , 1998 .

[7]  L. Coffin,et al.  A Study of the Effects of Cyclic Thermal Stresses on a Ductile Metal , 1954, Journal of Fluids Engineering.

[8]  Kenneth S. Vecchio,et al.  Analysis of long term reliability of plated-through holes in multilayer interconnection boards Part A: Stress analyses and material characterization , 1986 .

[9]  R. Iannuzzelli.  Predicting plated-through-hole reliability in high temperature manufacturing processes , 1991, 1991 Proceedings 41st Electronic Components & Technology Conference.

[10]  B. A. Mirman.  Mathematical model of a plated-through hole under a load induced by thermal mismatch , 1988 .

[11]  Mirng-Ji Lii,et al.  Reliability of high aspect ratio plated through holes (PTH) for advanced printed circuit board (PCB) packages , 1997, 1997 IEEE International Reliability Physics Symposium Proceedings. 35th Annual.

[12]  Donald Barker,et al.  Thermal Stress Issues in Plated-Through-Hole Reliability , 1993 .

[13]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[14]  John T. White,et al.  Tensile properties of acid copper electrodeposits , 1985 .