Application of nanoindentation technique for investigation of elasto-plastic properties of the selected thin film materials

Abstract Nanoindentation is one of the most known method for investigating the properties of thin films. The materials can be assessed by means of elastic mechanical properties (hardness and Young’s modulus). However, the author’s research work shows that it is possible to obtain the elastic as well as the plastic material behavior of the investigated thin layer. It can be done by using the nanoindentation experiment and the numerical simulations. This paper focuses then on investigation of thin metal layers by nanoindentation with a support of numerical methods, such as finite element method and numerical optimization processes. Additionally, the 3-level, full factorial design of experiment (DOE) process was applied. In order to carry out such experiment 27 samples were prepared and taken into account: three different materials with three different thickness’s values sputtered on three different substrates. The results were then processed by the numerical methods in order to achieve more information about the materials – mainly the plastic behavior.

[1]  Wole Soboyejo,et al.  Deformation and fracture in micro-tensile tests of freestanding electrodeposited nickel thin films , 2008 .

[2]  N. Barbosa,et al.  An Electrical Method for Measuring Fatigue and Tensile Properties of Thin Films on Substrates , 2007 .

[3]  J. L. Martin,et al.  Characterisation of TiN thin films using the bulge test and the nanoindentation technique , 1997 .

[4]  Jesús Rodríguez,et al.  Pile-up effect on nanoindentation tests with spherical–conical tips , 2005 .

[5]  R. Vinci,et al.  Comparison of Electrical and Microtensile Evaluations of Mechanical Properties of an Aluminum Film , 2007 .

[6]  Steve Pearton Metal Based Thin Films for Electronics , 2006 .

[7]  Wenyi Yan,et al.  Determination of plastic yield stress from spherical indentation slope curve , 2008 .

[8]  Artur Wymyslowski,et al.  Investigation of thin films by nanoindentation with doe and numerical methods , 2011, 2011 12th Intl. Conf. on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems.

[9]  J.J. Shea,et al.  Electronic packaging materials and their properties , 2001, IEEE Electrical Insulation Magazine.

[10]  William D. Nix,et al.  Mechanical properties of thin films , 1989 .

[11]  W. Drugan,et al.  Theory of plasticity , 1987 .

[12]  A. Elmustafa,et al.  A numerical study on pile-up in nanoindentation creep , 2008 .

[13]  G. Pharr,et al.  Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology , 2004 .

[14]  J. Vella,et al.  MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ELECTROPLATED Cu THIN FILMS , 2000 .