DPM-LES investigation on flow field dynamic and acoustic characteristics of a twin-fluid nozzle by multi-field coupling method

[1]  Y. Huan,et al.  Enhanced mechanical properties of epoxy composites embedded with MF/TiO2 hybrid shell microcapsules containing n-octadecane , 2022, Journal of Industrial and Engineering Chemistry.

[2]  Bin Yu,et al.  A novel one-dimensional force sensor calibration method to improve the contact force solution accuracy for legged robot , 2022, Mechanism and Machine Theory.

[3]  Bin Yu,et al.  Kinematics correction algorithm for the LHDS of a legged robot with semi-cylindrical foot end based on V-DOF , 2022, Mechanical systems and signal processing.

[4]  H. Gad,et al.  Effect of geometric parameters on spray characteristics of air assisted pressure swirl atomizer , 2021, Alexandria Engineering Journal.

[5]  Ding Cong,et al.  Effect of surface burnishing process with different strain paths on the copper microstructure , 2021, Journal of Manufacturing Processes.

[6]  Bo Chen,et al.  A multi-objective approach for the trajectory planning of a 7-DOF serial-parallel hybrid humanoid arm , 2021 .

[7]  Xiaodong Yang,et al.  Experimental investigation on the macroscopic spray and microscopic droplet diameter, velocity and temperature of R404A flashing spray , 2021 .

[8]  K. Giannakoglou,et al.  Unsteady continuous adjoint to URANS coupled with FW-H analogy for aeroacoustic shape optimization , 2021, Computers & Fluids.

[9]  Chuqiao Li,et al.  Experimental study on the spray steadiness of an internal-mixing twin-fluid atomizer , 2021, Energy.

[10]  A. Andreini,et al.  Lean blow-out prediction in an industrial gas turbine combustor through a LES-based CFD analysis , 2021, Combustion and Flame.

[11]  Tianyou Wang,et al.  Internal two-phase flow and spray characteristics of outside-in-liquid twin-fluid atomizers , 2021 .

[12]  Dianrong Gao,et al.  Experimental analysis of spray behavior and lubrication performance under twin-fluid atomization , 2020 .

[13]  Xinghui Han,et al.  Numerical analysis of the activated combustion high-velocity air-fuel (AC-HVAF) thermal spray process: A survey on the parameters of operation and nozzle geometry , 2020 .

[14]  Chenglong Xing,et al.  Numerical investigations on acoustic environment of multi-nozzle launch vehicle at lift-off , 2020 .

[15]  Dianrong Gao,et al.  Influence of atomizing core on droplet dynamic behavior and machining characteristics under synergistically enhanced twin-fluid spray , 2020, The International Journal of Advanced Manufacturing Technology.

[16]  Farhoud Kalateh,et al.  Simulation of cavitating fluid-Structure interaction using SPH-FE method , 2020, Math. Comput. Simul..

[17]  Hanieh K. Foroushan,et al.  On the dynamics of fluid particle breakage induced by hydrodynamic instabilities: A review of modelling approaches , 2020, Chemical Engineering Science.

[18]  F. Ommi,et al.  Numerical and experimental study of twin-fluid two-phase internal-mixing atomizer to develop maximum entropy method , 2020 .

[19]  Dianrong Gao,et al.  Investigation of the droplet characteristics and size distribution during the collaborative atomization process of a twin-fluid nozzle , 2020 .

[20]  S. Shu,et al.  Cooling performance improvement of circulating internal cooling turning tool by built-in additional spray cooling nozzle , 2020, IOP Conference Series: Materials Science and Engineering.

[21]  Pengfei Wang,et al.  Effect of water supply pressure on atomization characteristics and dust-reduction efficiency of internal mixing air atomizing nozzle , 2020 .

[22]  A. Jupke,et al.  Modeling the fluid dynamics of a high-pressure extraction column , 2019 .

[23]  G. Krishnamoorthy,et al.  Characterizing flame stability and radiative heat transfer in non-swirling oxy-coal flames using different multiphase modeling frameworks , 2019, Fuel.

[24]  J. Wen,et al.  Non-grey radiative heat transfer modelling in LES-CFD simulated methanol pool fires , 2019, Journal of Quantitative Spectroscopy and Radiative Transfer.

[25]  David B Hastie,et al.  Using a coupled CFD – DPM approach to predict particle settling in a horizontal air stream , 2019, Advanced Powder Technology.

[26]  Xiaoze Du,et al.  Parameter analysis of atomized droplets sprayed evaporation in flue gas flow , 2019, International Journal of Heat and Mass Transfer.

[27]  Wen Nie,et al.  Effects of spraying pressure and installation angle of nozzles on atomization characteristics of external spraying system at a fully-mechanized mining face , 2019, Powder Technology.

[28]  W. Nie,et al.  The diffusion of dust in a fully-mechanized mining face with a mining height of 7 m and the application of wet dust-collecting nets , 2018, Journal of Cleaner Production.

[29]  Dianrong Gao,et al.  Experimental investigation of atomization and droplet turbulence characteristics of a twin-fluid nozzle with different self-excited vibrating cavity structures , 2018, Experimental Thermal and Fluid Science.

[30]  Dianrong Gao,et al.  Influence of Self-excited Vibrating Cavity Structure on Droplet Diameter Characteristics of Twin-fluid Nozzle , 2018, Chinese Journal of Mechanical Engineering.

[31]  G. Wigley,et al.  Air–liquid interactions in a pressure-swirl spray , 2018, International Journal of Heat and Mass Transfer.

[32]  M. Renfro,et al.  Near-field dynamics of high-speed spray dryer coannular two fluid nozzle: Effects of operational conditions and formulations , 2018, Powder Technology.

[33]  Stephen Oxnard.  Investigating the stability of frequency-dependent locally reacting surface boundary conditions in numerical acoustic models. , 2018, Journal of the Acoustical Society of America.

[34]  Qinzhu Chen,et al.  Numerical Simulation on Atomizing Performance of Pressure Swirl Nozzles in Ethoxylation Reactors , 2018 .

[35]  Juntong Xi,et al.  A method to estimate the transient fluid pressure of a piezoelectric inkjet printer using system dynamic analysis , 2017 .

[36]  Zhihua Zhou,et al.  Dust pollution control on construction sites: Awareness and self-responsibility of managers , 2017 .

[37]  Chen Zhengwen,et al.  Numerical investigation on the internal flow and the particle movement in the abrasive waterjet nozzle , 2017 .

[38]  Chang-jiang Ni,et al.  Numerical and experimental investigation of the flow behavior of sand particles in core shooting process , 2017 .

[39]  A. Hamzehloo,et al.  Gas dynamics and flow characteristics of highly turbulent under-expanded hydrogen and methane jets under various nozzle pressure ratios and ambient pressures , 2016 .

[40]  R. Kouhikamali,et al.  Two-fluid model for simulation of supersonic flow of wet steam within high-pressure nozzles , 2015 .

[41]  B. Thomas,et al.  Transient Fluid Flow during Steady Continuous Casting of Steel Slabs: Part I. Measurements and Modeling of Two-phase Flow , 2014 .

[42]  P. Rasmussen,et al.  Canadian House Dust Study: population-based concentrations, loads and loading rates of arsenic, cadmium, chromium, copper, nickel, lead, and zinc inside urban homes. , 2013, The Science of the total environment.