Integrating SCREAM micromachined devices with integrated circuits

We demonstrate the integration of SCREAM MEMS with a conventional, unmodified IC process. After fabricating the ICs, only two additional masks are needed to form the mechanical structure and the patterned metal interconnects. The mechanical structures are high-aspect-ratio beams formed from single-crystal silicon. SCREAM, which stands for single-crystal-silicon reactive etching and metallization, is a low temperature process requiring conventional IC fabrication tools including the following: RIE, PVD, CVD and optical lithography. None of the processing steps expose the wafer to temperatures above 300/spl deg/C. Also, the MEMS are independent of the substrate doping, and can be used with the substrate that is optimal for a particular IC process. We describe SCREAM as a "Portable" MEMS process. A portable process does not alter the ICs, can be run after the IC process, and does not require modification of commonly available IC processes. To support the claim that SCREAM is a portable process, we built structures on wafers containing industrially fabricated AD712 BiFET opamps. The ICs stayed within specification and the structures demonstrate successful fabrication adjacent to ICs.

[1]  S. Terry,et al.  A Multilayer Ceramic Package For Silicon Micromachined Accelerometers , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[2]  Roger T. Howe,et al.  Design and performance of CMOS micromechanical resonator oscillators , 1994, Proceedings of IEEE 48th Annual Symposium on Frequency Control.

[3]  L. Spangler,et al.  ISAAC -- Integrated Silicon Automotive Accelerometer , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[4]  Oliver Paul,et al.  Novel fully CMOS-compatible vacuum sensor , 1995 .

[5]  Roger T. Howe,et al.  In Situ Phosphorus-doped Polysilicon For Integrated Mems , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[6]  N. C. MacDonald,et al.  A Milli Newton Micro Loading Device , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[7]  R. Howe,et al.  A passive, in situ micro strain gauge , 1993, [1993] Proceedings IEEE Micro Electro Mechanical Systems.

[8]  R. Prasad,et al.  Micro-instrumentation For Tribological Measurement , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[9]  Gregory T. A. Kovacs,et al.  Silicon Fusion Bonding and Deep Reactive Ion Etching a New Technology for Microstructures , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[10]  L. Zimmermann,et al.  Airbag application: a microsystem including a silicon capacitive accelerometer, CMOS switched capacitor electronics and true self-test capability , 1995 .

[11]  R. Howe,et al.  Polysilicon hollow beam lateral resonators , 1993, [1993] Proceedings IEEE Micro Electro Mechanical Systems.

[12]  Roger T. Howe,et al.  Polysilicon Integrated Microsystems: Technologies And Applications , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[13]  Francesca Campabadal,et al.  A technology for the monolithic fabrication of a pressure sensor and related circuitry , 1995 .

[14]  H. Gemmeke,et al.  High-precision readout circuit for LIGA acceleration sensors , 1995 .

[15]  Wolfgang Kuehnel,et al.  A surface micromachined silicon accelerometer with on-chip detection circuitry , 1994 .

[16]  Oliver Brand,et al.  Ultrasound-transducer using membrane resonators realized with bipolar IC technology , 1994, Proceedings IEEE Micro Electro Mechanical Systems An Investigation of Micro Structures, Sensors, Actuators, Machines and Robotic Systems.

[17]  W. Riethmuller,et al.  Novel Process For A Monolithic Integrated Accelerometer , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[18]  J. M. Noworolski,et al.  Silicon fusion bonding and deep reactive ion etching: a new technology for microstructures , 1996 .

[19]  N. C. MacDonald,et al.  A Microelectromechanics Based Artificial Cochlea (membac) , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[20]  N. C. MacDonald,et al.  SCREAM I: A single mask, single-crystal silicon, reactive ion etching process for microelectromechanical structures , 1994 .

[21]  N. C. MacDonald,et al.  Capacitance Based Tunable Micromechanical Resonators , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[22]  N. C. MacDonald,et al.  A RIE process for submicron, silicon electromechanical structures , 1992 .

[23]  C. Linder,et al.  Electrostatic polysilicon microrelays integrated with MOSFETs , 1994, Proceedings IEEE Micro Electro Mechanical Systems An Investigation of Micro Structures, Sensors, Actuators, Machines and Robotic Systems.

[24]  Helmut Dr. Klose,et al.  Micromechanics compatible with an 0.8 μm CMOS process , 1995 .