Benchmark Calculations of a Radiation Heat Transfer for a CANDU Fuel Channel Analysis using the CFD Code
暂无分享,去创建一个
To justify the use of a commercial Computational Fluid Dynamics (CFD) code for a CANDU fuel channel analysis, especially for the radiation heat transfer dominant conditions, the CFX-10 code is tested against three benchmark problems which were used for the validation of a radiation heat transfer in the CANDU analysis code, a CATHENA. These three benchmark problems are representative of the CANDU fuel channel configurations from a simple geometry to a whole fuel channel geometry. For the solutions of the benchmark problems, the temperature or the net radiation heat flux boundary conditions are prescribed for each radiating surface to determine the radiation heat transfer rate or the surface temperature, respectively by using the network method. The Discrete Transfer Model (DTM) is used for the CFX-10 radiation model and its calculation results are compared with the solutions of the benchmark problems. The CFX-10 results for the three benchmark problems are in close agreement with these solutions, so it is concluded that the CFX-10 with a DTM radiation model can be applied to the CANDU fuel channel analysis where a surface radiation heat transfer is a dominant mode of the heat transfer.
[1] B. N. Hanna,et al. CATHENA: A thermalhydraulic code for CANDU analysis , 1998 .
[2] F. Lockwood,et al. A new radiation solution method for incorporation in general combustion prediction procedures , 1981 .
[3] P. S. Cumber,et al. Improvements to the discrete transfer method of calculating radiative heat transfer , 1995 .
[4] M. Ozisik. Heat Transfer: A Basic Approach , 1984 .