Predicting Directly Measured Trunk and Upper Arm Postures in Paper Mill Work From Administrative Data, Workers’ Ratings and Posture Observations

Objectives A cost-efficient approach for assessing working postures could be to build statistical models for predicting results of direct measurements from cheaper data, and apply these models to samples in which only the latter data are available. The present study aimed to build and assess the performance of statistical models predicting inclinometer-assessed trunk and arm posture among paper mill workers. Separate models were built using administrative data, workers' ratings of their exposure, and observations of the work from video recordings as predictors. Methods Trunk and upper arm postures were measured using inclinometry on 28 paper mill workers during three work shifts each. Simultaneously, the workers were video filmed, and their postures were assessed by observation of the videos afterwards. Workers' ratings of exposure, and administrative data on staff and production during the shifts were also collected. Linear mixed models were fitted for predicting inclinometer-assessed exposure variables (median trunk and upper arm angle, proportion of time with neutral trunk and upper arm posture, and frequency of periods in neutral trunk and upper arm inclination) from administrative data, workers' ratings, and observations, respectively. Performance was evaluated in terms of Akaike information criterion, proportion of variance explained (R2), and standard error (SE) of the model estimate. For models performing well, validity was assessed by bootstrap resampling. Results Models based on administrative data performed poorly (R2 ≤ 15%) and would not be useful for assessing posture in this population. Models using workers' ratings of exposure performed slightly better (8% ≤ R2 ≤ 27% for trunk posture; 14% ≤ R2 ≤ 36% for arm posture). The best model was obtained when using observational data for predicting frequency of periods with neutral arm inclination. It explained 56% of the variance in the postural exposure, and its SE was 5.6. Bootstrap validation of this model showed similar expected performance in other samples (5th-95th percentile: R2 = 45-63%; SE = 5.1-6.2). Conclusions Observational data had a better ability to predict inclinometer-assessed upper arm exposures than workers' ratings or administrative data. However, observational measurements are typically more expensive to obtain. The results encourage analyses of the cost-efficiency of modeling based on administrative data, workers' ratings, and observation, compared to the performance and cost of measuring exposure directly.

[1]  Ulrika Aasa,et al.  Relationships between Work‐related Factors and Disorders in the Neck‐shoulder and Low‐back Region among Female and Male Ambulance Personnel , 2005, Journal of occupational health.

[2]  Jeong-Lim Kim,et al.  Risk factors for respiratory work disability in a cohort of pulp mill workers exposed to irritant gases , 2011, BMC public health.

[3]  J. Groothoff,et al.  Skin disease in paper mill workers. , 2005, Occupational medicine.

[4]  B.H.W. Eijckelhof Work-related stressors and neck and upper extremity symptoms: A matter of mechanics? , 2015 .

[5]  A Burdorf,et al.  Physical load as risk factor for musculoskeletal complaints among tank terminal workers. , 1997, American Industrial Hygiene Association journal.

[6]  Jack T Dennerlein,et al.  Prediction of trapezius muscle activity and shoulder, head, neck, and torso postures during computer use: results of a field study , 2014, BMC Musculoskeletal Disorders.

[7]  J. Habbema,et al.  Prognostic modelling with logistic regression analysis: a comparison of selection and estimation methods in small data sets. , 2000, Statistics in medicine.

[8]  K Torén,et al.  Health effects of working in pulp and paper mills: exposure, obstructive airways diseases, hypersensitivity reactions, and cardiovascular diseases. , 1996, American journal of industrial medicine.

[9]  Svend Erik Mathiassen,et al.  Cost efficiency comparison of four video-based techniques for assessing upper arm postures , 2012, Ergonomics.

[10]  S E Mathiassen,et al.  Precision of measurements of physical workload during standardised manual handling. Part II: Inclinometry of head, upper back, neck and upper arms. , 2006, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[11]  E. Åhsberg,et al.  Perceived quality of fatigue during different occupational tasks Development of a questionnaire , 1997 .

[12]  Jack T Dennerlein,et al.  Using “Exposure Prediction Rules” for Exposure Assessment: An Example on Whole-Body Vibration in Taxi Drivers , 2004, Epidemiology.

[13]  Klaas R. Westerterp,et al.  Assessment of physical activity: a critical appraisal , 2009, European Journal of Applied Physiology.

[14]  Diederick Grobbee,et al.  A diagnostic model for the detection of sensitization to wheat allergens was developed and validated in bakery workers. , 2010, Journal of clinical epidemiology.

[15]  J P Bonde,et al.  Task based exposure assessment in ergonomic epidemiology: a study of upper arm elevation in the jobs of machinists, car mechanics, and house painters , 2004, Occupational and Environmental Medicine.

[16]  K. Teschke,et al.  Measuring low back injury risk factors in challenging work environments: an evaluation of cost and feasibility. , 2007, American journal of industrial medicine.

[17]  B. Efron Estimating the Error Rate of a Prediction Rule: Improvement on Cross-Validation , 1983 .

[18]  S E Mathiassen,et al.  Assessment of physical work load in epidemiologic studies: concepts, issues and operational considerations. , 1994, Ergonomics.

[19]  P O Droz,et al.  Multimodel inference and multimodel averaging in empirical modeling of occupational exposure levels. , 2009, The Annals of occupational hygiene.

[20]  Massimo Bovenzi,et al.  Metrics of whole-body vibration and exposure–response relationship for low back pain in professional drivers: a prospective cohort study , 2009, International archives of occupational and environmental health.

[21]  Jørgen Skotte,et al.  Detection of physical activity types using triaxial accelerometers. , 2014, Journal of physical activity & health.

[22]  Svend Erik Mathiassen,et al.  Efficient assessment of exposure to manual lifting using company data. , 2013, Applied ergonomics.

[23]  Sigurd Mikkelsen,et al.  Sex Differences in Task Distribution and Task Exposures among Danish House Painters: An Observational Study Combining Questionnaire Data with Biomechanical Measurements , 2014, PloS one.

[24]  L. Punnett,et al.  Work-related musculoskeletal disorders: the epidemiologic evidence and the debate. , 2004, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[25]  Shinichi Nakagawa,et al.  A general and simple method for obtaining R2 from generalized linear mixed‐effects models , 2013 .

[26]  Svend Erik Mathiassen,et al.  Cost-efficient assessment of biomechanical exposure in occupational groups, exemplified by posture observation and inclinometry. , 2014, Scandinavian journal of work, environment & health.

[27]  Brian R. Cullis,et al.  Prediction in linear mixed models , 2004 .

[28]  K. Teschke,et al.  Occupational exposure to chemical agents in the paper industry , 2004, International archives of occupational and environmental health.

[29]  Svend Erik Mathiassen,et al.  Upper arm postures and movements in female hairdressers across four full working days. , 2010, The Annals of occupational hygiene.

[30]  Svend Erik Mathiassen,et al.  An integrated analysis of ergonomics and time consumption in Swedish 'craft-type' car disassembly. , 2005, Applied ergonomics.

[31]  Svend Erik Mathiassen,et al.  Task-based estimation of mechanical job exposure in occupational groups. , 2005, Scandinavian journal of work, environment & health.

[32]  Svend Erik Mathiassen,et al.  Data collection costs in industrial environments for three occupational posture exposure assessment methods , 2012, BMC Medical Research Methodology.

[33]  G. Hansson,et al.  Validity and reliability of triaxial accelerometers for inclinometry in posture analysis , 2001, Medical and Biological Engineering and Computing.

[34]  Kay Teschke,et al.  Measuring posture for epidemiology: Comparing inclinometry, observations and self-reports , 2009, Ergonomics.

[35]  Kjell Torén,et al.  Cohort mortality study of Swedish pulp and paper mill workers-nonmalignant diseases. , 2007, Scandinavian journal of work, environment & health.

[36]  Svend Erik Mathiassen,et al.  Data processing costs for three posture assessment methods , 2013, BMC Medical Research Methodology.

[37]  K Torén,et al.  Health effects of working in pulp and paper mills: malignant diseases. , 1996, American journal of industrial medicine.

[38]  C. Chatfield Model uncertainty, data mining and statistical inference , 1995 .

[39]  Antonio I Cuesta-Vargas,et al.  The use of inertial sensors system for human motion analysis , 2010, Physical therapy reviews : PTR.

[40]  Sunil J Rao,et al.  Regression Modeling Strategies: With Applications to Linear Models, Logistic Regression, and Survival Analysis , 2003 .

[41]  Svend Erik Mathiassen,et al.  A Comparison of Two Strategies for Building an Exposure Prediction Model. , 2015, The Annals of occupational hygiene.