Comparison of deep silicon etching using SF6/C4F8 and SF6/C4F6 plasmas in the Bosch process

Silicon was etched with the Bosch process using C4F8 and C4F6 plasmas in the deposition step to show a feasibility of the use of UFC plasmas in the Bosch process. The use of C4F8 and C4F6 plasmas resulted in different characteristics of fluorocarbon films and radicals, affecting the etch profiles. It was shown that the use of a C4F6 plasma in the deposition step of the Bosch process produced thicker and more strongly bonded fluorocarbon films, compared to a C4F8 plasma. It was because more CF2 radicals and lower F/C ratio fluorocarbon films were generated in C4F6 plasmas than those in C4F8 plasmas, confirmed by OES and XPS measurements. By changing only the duration of the deposition step under the same process conditions, highly anisotropic deep etching of silicon was successfully achieved using both SF6/C4F8 and SF6/C4F6 plasmas in the etching and/deposition steps of the Bosch process.

[1]  R. A. Barker,et al.  Investigation of plasma etching mechanisms using beams of reactive gas ions , 1981 .

[2]  K. Sasaki,et al.  Chemical bonds of fluorocarbon films which can be a source of CFx radicals , 2004 .

[3]  S. Moon,et al.  Effect of sidewall properties on the bottom microtrench during SiO2 etching in a CF4 plasma , 2005 .

[4]  W. Yoo,et al.  Investigation of in situ trench etching process and Bosch process for fabricating high-aspect-ratio beams for microelectromechanical systems , 2002 .

[5]  E. V. D. Drift,et al.  Balancing the etching and passivation in time-multiplexed deep dry etching of silicon , 2001 .

[6]  O. Joubert,et al.  Characterization of Dielectric Etching Processes by X-Ray Photoelectron Spectroscopy Analyses in High Aspect Ratio Contact Holes , 1999 .

[7]  Sung-ki Park,et al.  Effects of CH 2 F 2 Addition on a High Aspect Ratio Contact Hole Etching in a C 4 F 6 / O 2 / Ar Plasma , 2003 .

[8]  R. Reif,et al.  The Use of Unsaturated Fluorocarbons for Dielectric Etch Applications , 2002 .

[9]  Kazunori Tsujimoto,et al.  Low‐temperature reactive ion etching and microwave plasma etching of silicon , 1988 .

[10]  S. Moon,et al.  Improvement of SiO2 pattern profiles etched in CF4 and SF6 plasmas by using a Faraday cage and neutral beams , 2005 .

[11]  S. Moon,et al.  Contribution of bottom-emitted radicals to the deposition of a film on the SiO2 sidewall during CHF3 plasma etching , 2005 .

[12]  S. Samukawa,et al.  Differences in radical generation due to chemical bonding of gas molecules in a high-density fluorocarbon plasma: Effects of the C=C bond in fluorocarbon gases , 1999 .

[13]  K. Tachibana,et al.  Molecular composition of films and solid particles polymerized in fluorocarbon plasmas , 2001 .

[14]  Ivo W. Rangelow,et al.  Dry etching with gas chopping without rippled sidewalls , 1999 .

[15]  V. M. Donnelly,et al.  Investigation of fluorocarbon plasma deposition from c‐C4F8 for use as passivation during deep silicon etching , 2004 .

[16]  Eric A. Joseph,et al.  Role of fluorocarbon film formation in the etching of silicon, silicon dioxide, silicon nitride, and amorphous hydrogenated silicon carbide , 2004 .

[17]  Ying Zhang,et al.  Fluorocarbon high‐density plasmas. I. Fluorocarbon film deposition and etching using CF4 and CHF3 , 1994 .

[18]  Rafael Reif,et al.  Evaluation of C 4 F 8 O as an Alternative Plasma‐Enhanced Chemical Vapor Deposition Chamber Clean Chemistry , 2000 .

[19]  Patrick J. French,et al.  Advanced time-multiplexed plasma etching of high aspect ratio silicon structures , 2002 .

[20]  S. Samukawa,et al.  New radical control method for high-performance dielectric etching with nonperfluorocompound gas chemistries in ultrahigh-frequency plasma , 1999 .

[21]  Ivo W. Rangelow,et al.  Critical tasks in high aspect ratio silicon dry etching for microelectromechanical systems , 2003 .

[22]  Chang-Koo Kim,et al.  Deep etching of silicon with smooth sidewalls by an improved gas-chopping process using a Faraday cage and a high bias voltage , 2005 .

[23]  R. Reif,et al.  Evaluation of Oxalyl Fluoride for a Dielectric Etch Application in an Inductively Coupled Plasma Etch Tool , 2001 .

[24]  E. Kay,et al.  Difluorocarbene Emission Spectra from Fluorocarbon Plasmas and Its Relationship to Fluorocarbon Polymer Formation , 1982 .

[25]  Marc Schaepkens,et al.  Study of the SiO2-to-Si3N4 etch selectivity mechanism in inductively coupled fluorocarbon plasmas and a comparison with the SiO2-to-Si , 1998 .