Experimental and numerical investigation of aerodynamic performance for airfoils with morphed trailing edges

Abstract The aerodynamic performance of a NACA 0012 airfoil fitted with different flaps were studied experimentally and numerically. Comprehensive aerodynamic measurements including pressure distribution, lift and drag forces and wake flow for airfoils with different mean flap camber profiles were carried out over a wide range of angles of attack and chord-based Reynolds numbers. The results show that the mean flap camber profiles significantly affect the aerodynamic performance and the downstream wake development of the airfoil. It was found that the highly cambered flap profiles provide higher lift coefficients compared to the moderately cambered flap profiles, with an insignificant reduction in the overall lift-to-drag ratio. Furthermore, the Q-criterion iso-surface results show that the separation near the trailing-edge is further delayed at high angles of attack for airfoils with high mean flap camber. This study shows that the effective design space for flaps with morphing capabilities can be expanded by taking into account the optimal aerodynamic performance requirements. The study also suggests that in order to achieve optimum aerodynamic performance, an independent surface morphing of the suction and pressure surface camber will be required to delay the onset of flow separation.

[1]  Carl J. Wenzinger.  Wind-Tunnel Investigation of Ordinary and Split Flaps on Airfoils of Different Profile , 1937 .

[2]  Tomohiro Yokozeki,et al.  Development of Variable Camber Morphing Airfoil Using Corrugated Structure , 2014 .

[3]  A. Dehghan,et al.  Trailing Edge Noise Reduction Using Novel Surface Treatments , 2016 .

[4]  R. V. Barrett,et al.  Design and performance of a new low turbulence wind tunnel at Bristol University , 1984, The Aeronautical Journal (1968).

[5]  Hasan Kamliya Jawahar,et al.  Experimental and Numerical Investigation of Aerodynamic Performance of Airfoils Fitted with Morphing Trailing-edges , 2017 .

[6]  Scott J. Johnson,et al.  An overview of active load control techniques for wind turbines with an emphasis on microtabs , 2010 .

[7]  M. Azarpeyvand,et al.  On the noise prediction for serrated leading edges , 2017, Journal of Fluid Mechanics.

[8]  Jochen Fröhlich,et al.  Lessons from LESFOIL Project on Large-Eddy Simulation of Flow Around an Airfoil , 2003 .

[9]  Hasan Kamliya Jawahar,et al.  Aerodynamic performance and wake development of airfoils with serrated trailing-edges , 2017 .

[10]  S. Lele,et al.  Convective effects and the role of quadrupole sources for aerofoil aeroacoustics , 2012, Journal of Fluid Mechanics.

[11]  Hasan Kamliya Jawahar,et al.  Experimental investigation of aerodynamic performance of airfoils fitted with morphing trailing edges , 2016 .

[12]  Stéphane Moreau,et al.  Airfoil Trailing-Edge Blowing: Broadband Noise Prediction from Large-Eddy Simulation , 2012 .

[13]  Benedikt Ernst,et al.  Aerodynamic behavior of an airfoil with morphing trailing edge for wind turbine applications , 2014 .

[14]  Paul M. Weaver,et al.  Aerodynamic and aeroacoustic performance of airfoils with morphing structures , 2016 .

[15]  Hasan Kamliya Jawahar,et al.  Large eddy simulation of airfoil self-noise using OpenFOAM , 2017 .

[16]  D. Zafirakis,et al.  The wind energy (r)evolution: A short review of a long history , 2011 .

[17]  M. Azarpeyvand,et al.  Prediction of noise from serrated trailing edges , 2015, Journal of Fluid Mechanics.

[18]  P. Weaver,et al.  A morphing trailing edge device for a wind turbine , 2012 .