Effect of tempering on development of carbide particles in 2.7Cr-0.6Mo-0.3V steel
暂无分享，去创建一个
[1] A. Kohyama,et al. Mechanical Properties and Microstructure Changes of Low-activation 3Cr-2W-V-Ti Ferritic Steels Developed for Nuclear Applications , 1990 .
[2] R. Misra,et al. Stress enhanced grain boundary segregation of impurity elements in a low alloy steel , 1990 .
[3] H. Fischmeister,et al. Determination of carbide and matrix compositions in high-speed steels by analytical electron microscopy , 1989 .
[4] B. Senior. A critical review of precipitation behaviour in 1CrMoV rotor steels , 1988 .
[5] D. Edmonds,et al. Microstructure and mechanical properties of medium-carbon ferrite–pearlite steel microalloyed with vanadium , 1987 .
[6] J. Richter,et al. Investigation of the influence of the reheating temperature on size and composition of precipitates in microalloyed HSLA steels by analytical electron microscopy , 1987 .
[7] C. Laird,et al. Changes in morphology and composition of carbides during cyclic deformation at room and elevated temperature and their effect on mechanical properties of CrMoV steel , 1985 .
[8] N. Ridley,et al. Tempering of 2.25 Pct Cr-1 Pct Mo Low Carbon Steels , 1982 .
[9] R. Honeycombe,et al. Ferrite morphologies and carbide precipitation in a Cr-Mo-V creep-resisting steel , 1976 .
[10] Jin Yu,et al. The effects of composition and carbide precipitation on temper embrittlement of 2.25 Cr-1 Mo steel: Part I. Effects of P and Sn , 1980 .