Modelling of as manufactured geometry for prediction of impact and compression after impact behaviour of variable angle tow laminates

The development of variable angle tow technology has attracted growing attention in recent years due to its strong potential for structural tailoring. However, the full details of the failure mechanisms of variable angle tow laminates have been as yet unknown, and the design complexity also requires use of numerical analysis and novel techniques for variable angle tow composites. This paper addresses the two main problems for use of variable angle tow laminates in design. Firstly, a mathematical model is presented to build a three-dimensional variable angle tow model which exactly captures the features of as manufactured variable angle tow laminates. Secondly, impact and compression after impact models using three-dimensional detailed finite element analyses are presented to predict the failure behaviour of variable angle tow laminates including delamination evolution and crack propagation. Results obtained from the impact and compression after impact models are validated against experimental data.

[1]  G.A.O. Davies,et al.  Compression after impact strength of composite sandwich panels , 2004 .

[2]  H. Suemasu,et al.  A numerical study on compressive behavior of composite plates with multiple circular delaminations considering delamination propagation , 2008 .

[3]  Francesco Aymerich,et al.  Simulation of multiple delaminations in impacted cross-ply laminates using a finite element model based on cohesive interface elements , 2009 .

[4]  S. Sánchez-Sáez,et al.  Compression after impact of thin composite laminates , 2005 .

[5]  M. W. Hyer,et al.  Use of curvilinear fiber format in composite structure design , 1991 .

[6]  Hiroshi Suemasu,et al.  Damage propagation in CFRP laminates subjected to low velocity impact and static indentation , 2007 .

[7]  Francesco Aymerich,et al.  Prediction of impact-induced delamination in cross-ply composite laminates using cohesive interface elements , 2008 .

[8]  Zafer Gürdal,et al.  Progressive failure analysis of tow-placed, variable-stiffness composite panels , 2007 .

[9]  Zhangming Wu,et al.  Buckling analysis of VAT plate using energy method , 2012 .

[10]  Z. Gürdal,et al.  Variable-stiffness composite panels: Buckling and first-ply failure improvements over straight-fibre laminates , 2008 .

[11]  Paul M. Weaver,et al.  Buckling of variable angle tow plates: from concept, to experiment , 2009 .

[12]  Z. Gürdal,et al.  In-plane response of laminates with spatially varying fiber orientations - Variable stiffness concept , 1993 .

[13]  David Kennedy,et al.  VICONOPT: Program for Exact Vibration and Buckling Analysis or Design of Prismatic Plate Assemblies , 1991 .

[14]  R. Butler,et al.  Buckling optimization of variable-angle-tow panels using the infinite-strip method , 2013 .

[15]  Luis Reis,et al.  Failure mechanisms on composite specimens subjected to compression after impact , 1998 .

[16]  M.F.S.F. de Moura,et al.  Modelling the interaction between matrix cracking and delamination in carbon–epoxy laminates under low velocity impact , 2004 .

[17]  Paul M. Weaver,et al.  Continuous tow shearing for manufacturing variable angle tow composites , 2012 .

[18]  Stephen R Hallett,et al.  Cohesive zone length in numerical simulations of composite delamination , 2008 .

[19]  Oddvar O. Bendiksen,et al.  Structures, Structural Dynamics and Materials Conference , 1998 .

[20]  Rakesh K. Kapania,et al.  Optimization and Postbuckling Analysis of Curvilinear-Stiffened Panels Under Multiple-Load Cases , 2010 .

[21]  A. T. Marques,et al.  Modeling Compression Failure after Low Velocity Impact on Laminated Composites Using Interface Elements , 1997 .

[22]  Ignace Verpoest,et al.  Modelling of the interaction between matrix cracks and delaminations during impact of composite plates , 1996 .

[23]  M. Barikani,et al.  MODE II INTERLAMINAR FRACTURE TOUGHNESS OF CARBON/EPOXY LAMINATES , 2003 .

[24]  Garret N. Vanderplaats,et al.  CONMIN: A FORTRAN program for constrained function minimization: User's manual , 1973 .

[25]  Dawn C. Jegley,et al.  Design and Manufacture of Elastically Tailored Tow Placed Plates , 2002 .

[26]  Damiano Pasini,et al.  Optimum stacking sequence design of composite materials Part II: Variable stiffness design , 2010 .

[27]  Constantinos Soutis,et al.  Prediction of the post-impact compressive strength of CFRP laminated composites , 1996 .

[29]  Paul M. Weaver,et al.  Manufacturing characteristics of the continuous tow shearing method for manufacturing of variable angle tow composites , 2014 .

[30]  Stephen R Hallett,et al.  A numerical study on impact and compression after impact behaviour of variable angle tow laminates , 2013 .

[31]  Paul M. Weaver,et al.  Prebuckling and buckling analysis of variable angle tow plates with general boundary conditions , 2012 .

[32]  Jerzy Warminski,et al.  A review on the mechanical behaviour of curvilinear fibre composite laminated panels , 2014 .

[33]  S. Abrate.  Composite structures: impact on composites 2002 , 2003 .

[34]  M. Barikani,et al.  Mode-I Interlaminar Fracture Toughness in Unidirectional Carbon-fibre/Epoxy Composites , 2002 .