Grey box modelling for model predictive control of a heating process

Abstract This paper presents a rational modelling procedure of a pilot heating process by using the grey box modelling method. A simplified nonlinear continuous model, based on the conservation of energy, is formed and unknown parameters of the model are estimated by using measured data from an experiment with the process. The model is expanded with a wider model structure by testing formulated hypothesis about the process. The model is also expanded in an engineering way by considering the shape of the residuals. During the model expansion the Likelihood ratio test is applied for falsification tests. The study uses the continuous model for both estimating the states of the process and controlling the system. A continuous-discrete extended Kalman filter estimates the model states and time varying disturbances. The model predictive controller is based on the continuous process model, but the optimisation of the control performance index is made at discrete sampling instances. The control law compensates for changing temperature references and compensate for varying load situations. Besides using the model for control purposes the case demonstrate the possibility of using the grey box modelling technique to estimate physical process parameters such as the thermal diffusivity of the process.

[1]  Petre Stoica,et al.  Decentralized Control , 2018, The Control Systems Handbook.

[2]  W. Strauss,et al.  Partial Differential Equations: An Introduction , 1992 .

[3]  Arthur Gelb,et al.  Applied Optimal Estimation , 1974 .

[4]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[5]  Henrik Madsen,et al.  Experiment Design for Grey-Box Models , 1993 .

[6]  Calyampudi R. Rao,et al.  Linear Statistical Inference and Its Applications. , 1975 .

[7]  Dale E. Seborg,et al.  Nonlinear Process Control , 1996 .

[8]  Björn Sohlberg,et al.  Supervision and control for industrial processes , 1998 .

[9]  Niels Kjølstad Poulsen,et al.  Grey box modeling of first flush and incoming wastewater at a wastewater treatment plant , 2000 .

[10]  Eduardo F. Camacho,et al.  Model predictive control in the process industry , 1995 .

[11]  A. Jazwinski.  Stochastic Processes and Filtering Theory , 1970 .

[12]  L. Ljung,et al.  The role of model validation for assessing the size of the unmodeled dynamics , 1997, IEEE Trans. Autom. Control..

[13]  Torsten Bohlin,et al.  Interactive System Identification: Prospects and Pitfalls , 1991 .

[14]  Torsten Bohlin,et al.  Issues in Nonlinear Stochastic Grey-Box Identification , 1994 .

[15]  G. C. Goodwin,et al.  Optimal input signals for nonlinear-system identification , 1971 .

[16]  Lennart Ljung,et al.  System Identification: Theory for the User , 1987 .

[17]  Lennart Ljung,et al.  Ensuring monotonic gain characteristics in estimated models by fuzzy model structures , 2000, Autom..