Methods for validating the performance of wearable motion-sensing devices under controlled conditions

This paper presents validation methods for assessing the accuracy and precision of motion-sensing device (i.e. accelerometer) measurements. The main goals of this paper were to assess the accuracy and precision of these measurements against a gold standard, to determine if differences in manufacturing and assembly significantly affected device performance and to determine if measurement differences due to manufacturing and assembly could be corrected by applying certain post-processing techniques to the measurement data during analysis. In this paper, the validation of a posture and activity detector (PAD), a device containing a tri-axial accelerometer, is described. Validation of the PAD devices required the design of two test fixtures: a test fixture to position the device in a known orientation, and a test fixture to rotate the device at known velocities and accelerations. Device measurements were compared to these known orientations and accelerations. Several post-processing techniques were utilized in an attempt to reduce variability in the measurement error among the devices. In conclusion, some of the measurement errors due to the inevitable differences in manufacturing and assembly were significantly improved (p < 0.01) by these post-processing techniques.

[1]  Ronald W. Grant,et al.  IMEMS accelerometer testing-test laboratory development and usage , 1999, International Test Conference 1999. Proceedings (IEEE Cat. No.99CH37034).

[2]  Huosheng Hu,et al.  Use of multiple wearable inertial sensors in upper limb motion tracking. , 2008, Medical engineering & physics.

[3]  D. Altman,et al.  STATISTICAL METHODS FOR ASSESSING AGREEMENT BETWEEN TWO METHODS OF CLINICAL MEASUREMENT , 1986, The Lancet.

[4]  B.K. Gilbert,et al.  Design of Posture and Activity Detector (PAD) , 2007, 2007 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[5]  Guy Plasqui,et al.  Measuring free-living energy expenditure and physical activity with triaxial accelerometry. , 2005, Obesity research.

[6]  Eric Foxlin,et al.  Pedestrian tracking with shoe-mounted inertial sensors , 2005, IEEE Computer Graphics and Applications.

[7]  D. Bassett,et al.  The technology of accelerometry-based activity monitors: current and future. , 2005, Medicine and science in sports and exercise.

[8]  Kuan Zhang,et al.  Measurement of human daily physical activity. , 2003, Obesity research.

[9]  J. D. Janssen,et al.  A triaxial accelerometer and portable data processing unit for the assessment of daily physical activity , 1997, IEEE Transactions on Biomedical Engineering.

[10]  Daniele Giansanti,et al.  The development and test of a device for the reconstruction of 3-D position and orientation by means of a kinematic sensor assembly with rate gyroscopes and accelerometers , 2005, IEEE Transactions on Biomedical Engineering.

[11]  D. Giansanti.  Investigation of fall-risk using a wearable device with accelerometers and rate gyroscopes , 2006, Physiological measurement.

[12]  B E Ainsworth,et al.  Validity of four motion sensors in measuring moderate intensity physical activity. , 2000, Medicine and science in sports and exercise.

[13]  R. V. van Lummel,et al.  The accuracy of measuring the kinematics of rising from a chair with accelerometers and gyroscopes. , 2006, Journal of biomechanics.

[14]  D. Altman,et al.  Measuring agreement in method comparison studies , 1999, Statistical methods in medical research.

[15]  Zhaoying Zhou,et al.  A real-time articulated human motion tracking using tri-axis inertial/magnetic sensors package. , 2004, IEEE transactions on neural systems and rehabilitation engineering : a publication of the IEEE Engineering in Medicine and Biology Society.

[16]  M. Bodnicki,et al.  Sensing Tilt With MEMS Accelerometers , 2006, IEEE Sensors Journal.

[17]  Peter H Veltink,et al.  Accelerometer and rate gyroscope measurement of kinematics: an inexpensive alternative to optical motion analysis systems. , 2002, Journal of biomechanics.

[18]  G M Lyons,et al.  A description of an accelerometer-based mobility monitoring technique. , 2005, Medical engineering & physics.

[19]  Kuan Zhang,et al.  Improving energy expenditure estimation for physical activity. , 2004, Medicine and science in sports and exercise.

[20]  D. Roetenberg,et al.  Estimating Body Segment Orientation by Applying Inertial and Magnetic Sensing Near Ferromagnetic Materials , 2007, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[21]  Peter H. Veltink,et al.  Measuring orientation of human body segments using miniature gyroscopes and accelerometers , 2005, Medical and Biological Engineering and Computing.