Polyurethanes preparation using proteins obtained from microalgae

It is widely believed that the biofuels can be sustainably produced using microalgae that are known to convert CO2 from the atmosphere to lipids, in the presence of nutrient and accumulate them as their body mass. However, when algal biofuels are produced using thermochemical route, ~30–65 % of proteins present in algae are lost due to decomposition and some of the nitrogen from amino acids is incorporated into the biofuels. The algal protein is a valuable resource that can bring additional revenue to the biorefinery by converting this co-product to high-value polyurethanes. In this work, we have demonstrated a one-step removal of proteins from algae through hydrolysis of the proteins to smaller peptides and amino acids using environment friendly flash hydrolysis (FH) process. Subcritical water was used as a reactant and as a reaction media for hydrolyzing the algae proteins via FH. Scenedesmus spp., slurry in water (3.8 %), was used as the algal feed stock during the FH process which was run at 280 °C for a residence time of 10 s. The soluble amino acids and peptides were separated from the other insoluble algal biomass components (cell wall and lipids) by filtration followed by freeze-drying. The product was then characterized by ion chromatography and Fourier transform ion cyclotron resonance mass spectrometry to determine its composition. The freeze-dried peptide and amino acids were then reacted with diamine and ethylene carbonate to produce polyols that were further processed to produce polyurethane. The relatively high hydroxyl value of these amino acid-based polyols and their compatibility with other commercially available polyols made them particularly suitable for producing rigid polyurethane foams. Due to the presence of amines and secondary amines in these polyols, the polymerization process was self-catalytic and the resulting foams are less flammable than conventional rigid polyurethane foams. The conversion of algal proteins to high-value industrial products by a relatively simple process greatly improves the value of proteins extracted from algae.

[1]  John R. Benemann,et al.  Biofuels from Microalgae: Review of Products, Processes and Potential, with Special Focus on Dunaliella sp. , 2009, The Alga Dunaliella.

[2]  赵亮,et al.  Amino Acids Production from Fish Proteins Hydrolysis in Subcritical Water , 2008 .

[3]  Carlos Vaca-Garcia,et al.  Influence of microalgae cell wall characteristics on protein extractability and determination of nitrogen-to-protein conversion factors , 2012, Journal of Applied Phycology.

[4]  S. Erhan,et al.  Biodegradation Behavior of Some Vegetable Oil-Based Polymers , 2004 .

[5]  R. Narayan.  Carbon footprint of bioplastics using biocarbon content analysis and life-cycle assessment , 2011 .

[6]  Sandeep Kumar,et al.  Flash hydrolysis of microalgae (Scenedesmus sp.) for protein extraction and production of biofuels intermediates , 2013 .

[7]  F. Hsieh,et al.  Physical, mechanical, and thermal properties of water-blown rigid polyurethane foam containing soy protein isolate , 1996 .

[8]  F. Hsieh,et al.  Water-blown flexible polyurethane foam extended with biomass materials , 1997 .

[9]  J. Philp,et al.  Biobased plastics in a bioeconomy. , 2013, Trends in biotechnology.

[10]  Richard P. Wool,et al.  Bio-based polymers and composites , 2005 .

[11]  C. Posten,et al.  Second Generation Biofuels: High-Efficiency Microalgae for Biodiesel Production , 2008, BioEnergy Research.

[12]  R. N. Singh,et al.  Development of suitable photobioreactor for algae production – A review , 2012 .

[13]  Frédéric Vogel,et al.  Catalytic gasification of algae in supercritical water for biofuel production and carbon capture , 2009 .

[14]  Jo‐Shu Chang,et al.  Cultivation, photobioreactor design and harvesting of microalgae for biodiesel production: a critical review. , 2011, Bioresource technology.

[15]  Yusuf Chisti,et al.  Constraints to commercialization of algal fuels. , 2013, Journal of biotechnology.

[16]  Ramani Narayan,et al.  Rationale, Drivers, Standards, and Technology for Biobased Materials , 2006 .

[17]  Derk Willem Frederik Brilman,et al.  Catalytic and Non-catalytic Supercritical Water Gasification of Microalgae and Glycerol , 2010 .

[18]  Ryan Davis,et al.  Techno-economic analysis of autotrophic microalgae for fuel production , 2011 .

[19]  I. Chronakis.  Biosolar proteins from aquatic algae , 2000 .

[20]  Constance Lever‐Tracy.  Routledge Handbook of Climate Change and Society , 2010 .

[21]  Lucia Sansone,et al.  Processing and shelf life issues of selected food packaging materials and structures from renewable resources , 2011 .

[22]  U. Karsten,et al.  Intermediate pyrolysis and product identification by TGA and Py-GC/MS of green microalgae and their extracted protein and lipid components , 2013 .

[23]  P. Savage,et al.  The use of hydrothermal carbonization to recycle nutrients in algal biofuel production , 2013 .

[24]  Wei Zhang,et al.  Effect of structure on properties of polyols and polyurethanes based on different vegetable oils , 2004 .

[25]  Michael Taylor,et al.  An overview of second generation biofuel technologies. , 2010, Bioresource technology.

[26]  A. Piotrowska,et al.  A new route to polyurethanes from ethylene carbonate, diamines and diols , 2002 .

[27]  E. Harth,et al.  Synthesis of amino acid-based polymers via atom transfer radical polymerization in aqueous media at ambient temperature. , 2005, Chemical communications.