Strength of lime–fly ash compacts using different curing techniques and gypsum additive

Lime–fly ash mixtures are exploited for the manufacture of fly ash bricks finding applications in load bearing masonry. Lime–pozzolana reactions take place at a slow pace under ambient temperature conditions and hence very long curing durations are required to achieve meaningful strength values. The present investigation examines the improvements in strength development in lime–fly ash compacts through low temperature steam curing and use of additives like gypsum. Results of density–strength–moulding water content relationships, influence of lime–fly ash ratio, steam curing and role of gypsum on strength development, and characteristics of compacted lime–fly ash–gypsum bricks have been discussed. The test results reveal that (a) strength increases with increase in density irrespective of lime content, type of curing and moulding water content, (b) optimum lime–fly ash ratio yielding maximum strength is about 0.75 in the normal curing conditions, (c) 24 h of steam curing (at 80°C) is sufficient to achieve nearly possible maximum strength, (d) optimum gypsum content yielding maximum compressive strength is at 2%, (e) with gypsum additive it is possible to obtain lime–fly ash bricks or blocks having sufficient strength (>10 MPa) at 28 days of normal wet burlap curing.