The characterization of electrically conductive silver ink patterns on flexible substrates

Electrically conductive silver ink patterns were produced by the screen printing method. Paper, fabrics and plastics were used as the substrate materials. The electrical properties of the samples were characterized by sheet resistance measurement as a function of curing temperature and curing time. The mechanical properties of the samples were characterized by cross hatch adhesion test, bending test and tensile test. Depending on the process parameters and materials, the sheet resistance of the printed conductive patterns varied between 0.04 Ω/□ and 0.13 Ω/□. The curing temperature appeared to have a significant effect on the sheet resistance. In all cases sheet resistance decreased as a function of curing temperature. Adhesion between the substrates and the conductive patterns appeared to be good. The result of the bending test indicated that the resistivity of the silver ink patterns increased as a function of the bending cycle process. The results of the tensile and electrical tests showed that with the screen printing method it is possible to produce highly stretchable electrically conductive patterns for practical applications.

[1]  Andrzej Dziedzic.  Carbon/polyesterimide thick-film resistive composites - Experimental characterization and theoretical analysis of physicochemical, electrical and stability properties , 2007, Microelectron. Reliab..

[2]  A. Koptioug,et al.  Reduced Amount of Conductive Ink with Gridded Printed Antennas , 2005, Polytronic 2005 - 5th International Conference on Polymers and Adhesives in Microelectronics and Photonics.

[3]  Lauri Sydanheimo,et al.  Analysis of Silver Ink Bow-Tie RFID Tag Antennas Printed on Paper Substrates , 2007 .

[4]  William D. Callister,et al.  Materials Science and Engineering: An Introduction , 1985 .

[5]  M. Lahti,et al.  Gravure-offset-printing technique for the fabrication of solid films , 1999 .

[6]  Kimmo Kaija,et al.  Analysis of mechanical performance of silver inkjet-printed structures , 2008, 2008 2nd IEEE International Nanoelectronics Conference.

[7]  N. Halonen,et al.  Gravure printing of conductive particulate polymer inks on flexible substrates , 2005 .

[8]  Shuichi Wakimoto,et al.  Flexible displacement sensor using injected conductive paste , 2008 .

[9]  Pekka Ruuskanen,et al.  Electrically Conductive Metal Polymer Nanocomposites for Electronics Applications , 2008 .

[10]  Gerhard Tröster,et al.  Screen-printed Textile Transmission Lines , 2007 .

[11]  F. Delale,et al.  A statistical model of electrical resistance of carbon fiber reinforced composites under tensile loading , 2008 .

[12]  W. Hicks,et al.  Membrane Touch switches: Thick-Film Materials Systems and Processing Options , 1980 .

[13]  Andrzej Dziedzic.  Polymer/conductive filler composites: chosen properties and application , 1996, Other Conferences.

[14]  Jie Zhang,et al.  Fine-line conductor manufacturing using drop-on demand PZT printing technology , 2002 .

[15]  Yung‐Sen Lin,et al.  Effects of oxidation and particle shape on critical volume fractions of silver-coated copper powders in conductive adhesives for microelectronic applications , 2004 .

[16]  Anne Blayo,et al.  Printing processes and their potential for RFID printing , 2005, sOc-EUSAI '05.

[17]  H. Ishiguro,et al.  Development of Super-Flexible Wires Using Conductive Adhesives for Artificial Skin Applications of Robots and Related Equipments , 2005, International Conference on Polymers and Adhesives in Microelectronics and Photonics.

[18]  Joseph Kost,et al.  Effects of axial stretching on the resistivity of carbon black filled silicone rubber , 1983 .

[19]  S. Molesa,et al.  Ultra-Low-Cost Printed Electronics , 2006 .

[20]  N. Hu,et al.  Tunneling effect in a polymer/carbon nanotube nanocompositestrain sensor , 2008 .