The Effect of Temperature on Flowback Data Analysis in Shale Gas Reservoirs: A Simulation-Based Study

During hydraulic fracturing, there is a temperature difference between the injected water and formation rock for shale gas wells. The objective of this study is to investigate how this temperature difference changes with time, and how it affects multiphase-flow modeling during the shut-in and flowback periods. We conducted numerical simulations to investigate the behaviors of fracture temperature in shale gas wells. The results show a significant increase in fracture temperature during the shut-in and flowback periods. Sensitivity analysis suggests that this temperature increase is strongly related to the thermal conductivity of formation rock, matrix permeability, and initial reservoir temperature. Simulation scenarios were further compared to investigate the effect of temperature on flowback data analysis. Without considering the thermal effect, flowback data analysis may yield an earlier fracture cleanup and overestimated fracture volume. In addition, this study suggests that the thermal effect may also have implications for optimizing flowback operations.

[1]  A Ghassemi,et al.  Self-similarity and scaling of thermal shock fractures. , 2014, Physical review. E, Statistical, nonlinear, and soft matter physics.

[2]  Martin Dobson,et al.  Closing the Gap: Fracture Half Length from Design, Buildup, and Production Analysis , 2005 .

[3]  K. Aziz,et al.  Prediction of Bottom-hole Conditions For Wet Steam Injection Wells , 1982 .

[4]  Comprehensive Modeling of Downhole Temperature in a Horizontal Well With Multiple Fractures , 2018, SPE Journal.

[5]  H. Viswanathan,et al.  Hydraulic fracturing fluid migration in the subsurface: A review and expanded modeling results , 2015 .

[6]  T. Patzek,et al.  Thermal cooling to improve hydraulic fracturing efficiency and hydrocarbon production in shales , 2019, Journal of Natural Gas Science and Engineering.

[7]  Hassan Dehghanpour,et al.  The fate of fracturing water: A field and simulation study , 2016 .

[8]  Quan Liu,et al.  A Numerical Study on Travel Time Based Hydraulic Tomography Using the SIRT Algorithm with Cimmino Iteration , 2019, Water.

[9]  Rao Bhamidimarri,et al.  A review of the issues and treatment options for wastewater from shale gas extraction by hydraulic fracturing , 2016 .

[10]  J. Hakala,et al.  Role of water−rock interaction in the geochemical evolution of Marcellus Shale produced waters , 2018 .

[11]  M. Honarpour,et al.  Imbibition and Water Blockage In Unconventional Reservoirs: Well-Management Implications During Flowback and Early Production , 2014 .

[12]  Zhiping Li,et al.  Impact of water blocking in fractures on the performance of hydraulically fractured horizontal wells in tight gas reservoir , 2017 .

[13]  Ryan W. J. Edwards,et al.  Shale Gas Well, Hydraulic Fracturing, and Formation Data to Support Modeling of Gas and Water Flow in Shale Formations , 2018 .

[14]  E. Ghanbari,et al.  Fracture Characterization Using Flowback Salt-Concentration Transient , 2016 .

[15]  Patrick Marroum,et al.  Mechanistic analysis of solute transport in an in vitro physiological two‐phase dissolution apparatus , 2012 .

[16]  T. Babadagli,et al.  Analysis of counter-current gas–water capillary imbibition transfer at different temperatures , 2007 .

[17]  Frank J. Millero,et al.  Viscosity of water at various temperatures , 1969 .

[18]  H. Y. Jennings,et al.  The Effect of Temperature and Pressure on the Interfacial Tension of Water Against Methane-Normal Decane Mixtures , 1971 .

[19]  Akhil Datta-Gupta,et al.  Fracture Diagnosis in Multiple-Stage-Stimulated Horizontal Well by Temperature Measurements With Fast Marching Method , 2016 .

[20]  D. McVay,et al.  Modeling Fracture-Fluid Cleanup in Tight-Gas Wells , 2010 .

[21]  James P. Brill,et al.  A Study of Two-Phase Flow in Inclined Pipes , 1973 .

[22]  Martin Sauter,et al.  Numerical investigations of upward migration of fracking fluid along a fault zone during and after stimulation , 2017 .

[23]  Qingling Liu,et al.  Experimental study of water vapor adsorption behaviors on shale , 2019, Fuel.

[24]  H. Dehghanpour,et al.  Estimating Effective Fracture Pore Volume From Flowback Data and Evaluating Its Relationship to Design Parameters of Multistage-Fracture Completion , 2017 .

[25]  Robert A. Wattenbarger,et al.  Estimation of Effective-Fracture Volume Using Water-Flowback and Production Data for Shale-Gas Wells , 2014 .

[26]  Hassan Dehghanpour,et al.  A model for simultaneous matrix depletion into natural and hydraulic fracture networks , 2014 .

[27]  J. Olson,et al.  Natural fracture characterization in tight gas sandstones: Integrating mechanics and diagenesis , 2009 .

[28]  G. Vasseur,et al.  Mineralogy, porosity and fluid control on thermal conductivity of sedimentary rocks , 1989 .

[29]  Yueming Cheng.  Impact of Water Dynamics in Fractures on the Performance of Hydraulically Fractured Wells in Gas-Shale Reservoirs , 2012 .

[30]  Marc J. Assael,et al.  Standard Reference Data for the Thermal Conductivity of Water , 1995 .

[31]  B. M. Fabuss,et al.  Viscosity of liquid water from 25 to 150.degree. measurements in pressurized glass capillary viscometer , 1968 .

[32]  Florian Doster,et al.  Numerical Modeling of Gas and Water Flow in Shale Gas Formations with a Focus on the Fate of Hydraulic Fracturing Fluid. , 2017, Environmental science & technology.

[33]  J. Tao,et al.  Laboratory study on the mechanical behaviors of an anisotropic shale rock , 2015 .

[34]  H. Bahr,et al.  Scaling behavior of thermal shock crack patterns and tunneling cracks driven by cooling or drying , 2010 .

[35]  E. Ghanbari,et al.  Impact of rock fabric on water imbibition and salt diffusion in gas shales , 2015 .

[36]  B. Sage,et al.  Viscosity of Hydrocarbons. Methane. , 1965 .

[37]  T. Engelder,et al.  A model describing flowback chemistry changes with time after Marcellus Shale hydraulic fracturing , 2015 .

[38]  Daniel Obinna Ezulike,et al.  A comparative study of flowback rate and pressure transient behavior in multifractured horizontal wells completed in tight gas and oil reservoirs , 2014 .

[39]  H. Dehghanpour,et al.  Liquid uptake of gas shales: A workflow to estimate water loss during shut-in periods after fracturing operations , 2014 .

[40]  H. Dehghanpour,et al.  Advances in Understanding Wettability of Gas Shales , 2014 .

[41]  J. Sheng,et al.  Effect of desiccation on shut-in benefits in removing water blockage in tight water-wet cores , 2019, Fuel.

[42]  Chris Carpenter.  Use of Microseismic Monitoring To Compare Completion Designs , 2016 .

[43]  Jishan Liu,et al.  A multiscale-multiphase simulation model for the evaluation of shale gas recovery coupled the effect of water flowback , 2017 .

[44]  M. Sauter,et al.  Modeling fate and transport of hydraulic fracturing fluid in the presence of abandoned wells. , 2019, Journal of contaminant hydrology.

[45]  M. Molenaar,et al.  Interpreting Uncemented Multistage Hydraulic-Fracturing Completion Effectiveness Using Fiber-Optic DTS Injection Data , 2012 .

[46]  Mehmet Ali Torcuk,et al.  Effect of shut-in time on gas flow rate in hydraulic fractured shale reservoirs , 2016 .

[47]  Eric James Mackay,et al.  Produced-Water-Chemistry History Matching Using a 1D Reactive Injector/Producer Reservoir Model , 2013 .

[48]  Karen Bybee.  Resolving Created, Propped, and Effective Hydraulic-Fracture Length , 2009 .

[49]  L. Kump,et al.  Geochemical evaluation of flowback brine from Marcellus gas wells in Pennsylvania, USA , 2013 .

[50]  Mukul M. Sharma,et al.  Practical insights into liquid loading within hydraulic fractures and potential unconventional gas reservoir optimization strategies , 2015 .