Permeability characterization of stitched carbon fiber preforms by fiber optic sensors

The in-plane and through thickness permeability of unidirectional stitched carbon fiber preforms have been determined through vacuum infusion tests. The impregnation of various dry preforms with different stitching characteristics has been monitored by fiber optic sensors that have been stitched together with the dry tow to manufacture the dry preform. The experimental infusion times have been fitted by a numerical procedure based on Finite Element (FE) processing simu- lations. A good agreement between the numerical and experimental infusion times has been found demonstrating the poten- tiality of the fiber sensor system as suitable tool to evaluate impregnation times and permeability characteristics.

[1]  Suresh G. Advani,et al.  Desirable features in mold filling simulations for Liquid Composite Molding processes , 2004 .

[2]  C. Demaría,et al.  In‐plane anisotropic permeability characterization of deformed woven fabrics by unidirectional injection. Part II: Prediction model and numerical simulations , 2007 .

[3]  R. J. Johnson,et al.  Simulation of active flow control based on localized preform heating in a VARTM process , 2006 .

[4]  P. Henrat,et al.  An Experimental Assessment of the Saturated Transverse Permeability of Non-crimped New Concept (NC2) Multiaxial Fabrics , 2005 .

[5]  Nuno Correia,et al.  Analysis of the vacuum infusion moulding process , 2004 .

[6]  A. K. Kulshreshtha,et al.  Handbook of Polymer Blends and Composites , 2002 .

[7]  Joël Bréard,et al.  Continuous transverse permeability of fibrous media , 2010 .

[8]  Antonello Cutolo,et al.  Resin flow monitoring in resin film infusion process , 2003 .

[9]  Permeability characterization. Part 2: Flow behavior in multiple‐layer preforms , 1995 .

[10]  Andrew C. Long,et al.  Analysis of the vacuum infusion moulding process: I. Analytical formulation , 2005 .

[11]  H. Hahn,et al.  Resin film infusion of stitched stiffened composite panels , 2003 .

[12]  François Trochu,et al.  In‐plane anisotropic permeability characterization of deformed woven fabrics by unidirectional injection. Part I: Experimental results , 2007 .

[13]  Ben Wang,et al.  Flow modeling and simulation of SCRIMP for composites manufacturing , 2000 .

[14]  Suresh G. Advani,et al.  Flow front measurements and model validation in the vacuum assisted resin transfer molding process , 2001 .

[15]  J. Youn,et al.  Modeling of resin infusion in vacuum assisted resin transfer molding , 2008 .

[16]  Piaras Kelly,et al.  Simulation of the reinforcement compaction and resin flow during the complete resin infusion process , 2010 .

[17]  J. Gillespie,et al.  Measurement of transverse permeability using gaseous and liquid flow , 2007 .

[18]  Sylvain Drapier,et al.  Characterization of transient through-thickness permeabilities of Non Crimp New Concept (NC2) multiaxial fabrics , 2005 .

[19]  Alexandre Pagot,et al.  Influence of the stitching density on the transverse permeability of non-crimped new concept (NC2) multiaxial reinforcements: measurements and predictions , 2002 .

[20]  Woo Il Lee,et al.  Analysis of vacuum bag resin transfer molding process , 2001 .

[21]  V. Michaud,et al.  Transverse permeability of chopped fibre bundle beds , 2007 .

[22]  T. Staffan Lundström,et al.  In-plane permeability measurements on fiber reinforcements by the multi-cavity parallel flow technique , 1999 .

[23]  Suresh G. Advani,et al.  The implications of fiber compaction and saturation on fully coupled VARTM simulation , 2004 .

[24]  Suresh G. Advani,et al.  A Closed Form Solution for Flow During the Vacuum Assisted Resin Transfer Molding Process , 2000 .

[25]  A. Hammami,et al.  Analysis of the vacuum infusion molding process , 2000 .

[26]  Constantina Lekakou,et al.  Measurement techniques and effects on in-plane permeability of woven cloths in resin transfer moulding , 1996 .

[27]  J. Gillespie,et al.  Experimental Investigation of the Controlled Atmospheric Pressure Resin Infusion (CAPRI) Process , 2008 .

[28]  A. Long,et al.  Active control of the vacuum infusion process , 2007 .

[29]  William O. Ballata,et al.  Determination of the Transverse Permeability of a Fiber Preform , 1999 .

[30]  L. Nicolais,et al.  A fiber optic thermoset cure monitoring sensor , 2000 .

[31]  R. Batra,et al.  A Three-Dimensional Model of the Resin Film Infusion Process , 2002 .

[32]  Bekir Yenilmez,et al.  Variation of part thickness and compaction pressure in vacuum infusion process , 2009 .

[33]  Modeling and analysis of thickness gradient and variations in vacuum‐assisted resin transfer molding process , 2008 .

[34]  A. Long,et al.  Use of Resin Transfer Molding Simulation to Predict Flow, Saturation and Compaction in the VARTM Process , 2002 .

[35]  Simon Bickerton,et al.  Compression flow permeability measurement: a continuous technique , 2003 .