Integrated multidisciplinary design optimization of rotorcraft

Abstract : This paper describes a joint NASA/Army research activity at the Langley Research Center to develop optimization procedures aimed at improving the rotor blade design process by integrating appropriate disciplines and accounting for important interactions among the disciplines. The activity is being guided by a Steering Committee made up of key NASA and Army researchers and managers. The committee, which has been named IRASC (Integrated Rotorcraft Analysis Steering Committee). has defined two principal foci for the activity: a white paper which sets forth the goals and plans of the effort; and a rotor design project which will validate the basic constituents, as well as the overall design methodology for multidisciplinary optimization. The paper describes the optimization formulation in terms of the objectives function, design variables, and constraints. The analysis aspects are discussed, and an initial attempt at defining the interdisciplinary coupling is summarized. At this writing, some significant progress has been made. Results are given in the paper which represent accomplishments in rotor aerodynamic performance optimization for minimum hover horsepower, rotor structural optimization for vibration reduction, rotor structural optimization for minimum weight, and integrated aerodynamic load/dynamics optimization for minimum vibration and weight.

[1]  M. W. Davis,et al.  Experimental Verification of Helicopter Blade Designs Optimized For Minimum Vibration , 1988 .

[2]  David A. Peters,et al.  Design of helicopter rotor blades for optimum dynamic characteristics , 1986 .

[3]  Susan L. Althoff,et al.  Helicopter rotor induced velocities theory and experiment , 1987 .

[4]  Peretz P. Friedmann,et al.  Application of modern structural optimization to vibration reduction in rotorcraft , 1984 .

[5]  Garret N. Vanderplaats,et al.  CONMIN: A FORTRAN program for constrained function minimization: User's manual , 1973 .

[6]  Susan L. Althoff,et al.  Inflow measurements made with a laser velocimeter on a helicopter model in forward flight. Volume 4: Tapered planform blades at an advance ratio of 0.15 , 1988 .

[7]  Joanne L. Walsh,et al.  Optimization Methods Applied to the Aerodynamic Design of Helicopter Rotor Blades , 1987 .

[8]  Holt Ashley,et al.  On Making Things the Best-Aeronautical Uses of Optimization , 1982 .

[9]  Aditi Chattopadhyay,et al.  Fully integrated aerodynamic/dynamic optimization of helicopter rotor blades , 1989 .

[10]  M. W. Davis,et al.  Optimization of helicopter rotor blade design for minimum vibration , 1984 .

[11]  Singiresu S Rao,et al.  Multiobjective optimization in structural design with uncertain parameters and stochastic processes , 1984 .

[12]  Aditi Chattopadhyay,et al.  Minimum weight design of rotorcraft blades with multiple frequency and stress constraints , 1988 .

[13]  F. Caradonna,et al.  An experimental study of rotor-vortex interactions , 1988 .

[14]  Mark W Nixon.  Preliminary structural design of composite main rotor blades for minimum weight , 1987 .

[15]  J. Sobieszczanski-Sobieski.  Structural optimization: Challenges and opportunities , 1983 .

[16]  Howard M. Adelman,et al.  Optimal placement of tuning masses for vibration reduction in helicopter rotor blades , 1990 .

[17]  K. S. Brentner,et al.  Prediction of Helicopter Rotor Discrete Frequency Noise - A Computer Program Incorporating Realistic , 1986 .

[18]  Hirokazu Miura,et al.  Applications of numerical optimization methods to helicopter design problems: A survey , 1984 .

[19]  Alfred Gessow,et al.  Aerodynamics of the Helicopter , 1981 .