A review of 3D printed patient specific immobilisation devices in radiotherapy

Highlights • Investigating 3D printed immobilization devices.• Comparing the 3D printed immobilization devices with traditional ones.• Investigating the technical fabrication details of the articles.• Introducing the scope, testing and results of the studied literatures.

[1]  Alexandru Foias,et al.  Radiotherapy Immobilization Mask Molding Through the Use of 3D-Printed Head Models , 2018, Technology in cancer research & treatment.

[2]  M. Barton,et al.  Evidence-based estimates of the demand for radiotherapy. , 2015, Clinical oncology (Royal College of Radiologists (Great Britain)).

[3]  D. Song,et al.  Inter- and intrafraction patient positioning uncertainties for intracranial radiotherapy: a study of four frameless, thermoplastic mask-based immobilization strategies using daily cone-beam CT. , 2011, International journal of radiation oncology, biology, physics.

[4]  Michael Lamba,et al.  Design of a 3D Printed Immobilization Device for Radiation Therapy of Experimental Tumors in Mice , 2017 .

[5]  James I. Novak,et al.  The Popular Culture of 3D Printing , 2019, Advances in Media, Entertainment, and the Arts.

[6]  Mika Salmi,et al.  Possibilities of Preoperative Medical Models Made by 3D Printing or Additive Manufacturing , 2016, Journal of medical engineering.

[7]  Frederik L. Giesel,et al.  OC-0412: 3D printing of individual immobilization devices based on imaging ñ analysis of positioning accuracy , 2015 .

[8]  Philip Tack,et al.  3D-printing techniques in a medical setting: a systematic literature review , 2016, BioMedical Engineering OnLine.

[9]  Richard J. Bibb,et al.  Comparing additive manufacturing technologies for customised wrist splints , 2015 .

[10]  E. Ares,et al.  Qualitative feasibility research to develop a novel approach for a design of a head support for radiosurgery or stereotactic radiosurgery (SRS) , 2017 .

[11]  M. Fisher,et al.  Evaluation of 3-D Printed Immobilisation Shells for Head and Neck IMRT , 2014 .

[12]  Clifton D. Fuller,et al.  Design and fabrication of a 3D–printed oral stent for head and neck radiotherapy from routine diagnostic imaging , 2017, 3D Printing in Medicine.

[13]  L. Leksell.  The stereotaxic method and radiosurgery of the brain. , 1951, Acta chirurgica Scandinavica.

[14]  Sonja Dieterich.  Chapter 6 – Immobilization Techniques in Radiotherapy , 2016 .

[15]  Naren Ramakrishna,et al.  A clinical comparison of patient setup and intra-fraction motion using frame-based radiosurgery versus a frameless image-guided radiosurgery system for intracranial lesions. , 2010, Radiotherapy and oncology : journal of the European Society for Therapeutic Radiology and Oncology.

[16]  Ian Gibson,et al.  Design optimisation of a thermoplastic splint , 2017 .

[17]  Roland Unterhinninghofen,et al.  3D-Printed masks as a new approach for immobilization in radiotherapy – a study of positioning accuracy , 2018, Oncotarget.

[18]  Geoff Delaney M.B.B.S.,et al.  The role of radiotherapy in cancer treatment , 2005 .

[19]  Eric Lartigau,et al.  Évaluation par tomodensitométrie du repositionnement en radiothérapie stéréotaxique fractionnée cérébrale , 2009 .

[20]  Ian Gibson,et al.  Applications of 3D topography scanning and multi-material additive manufacturing for facial prosthesis , 2016 .

[21]  D. Wang,et al.  Comparision of 3D Printed Headrest for Pediatric Patients and SRS Standard Headrest in Radiation Therapy , 2018, International Journal of Radiation Oncology*Biology*Physics.

[22]  Ian Gibson,et al.  Additive manufacturing technologies : 3D printing, rapid prototyping, and direct digital manufacturing , 2015 .

[23]  James I. Novak,et al.  A design for additive manufacturing case study: fingerprint stool on a BigRep ONE , 2019, Rapid Prototyping Journal.

[24]  Ian Gibson,et al.  Augmented patient-specific facial prosthesis production using medical imaging modelling and 3D printing technologies for improved patient outcomes , 2018 .

[25]  Colin G Orton,et al.  Point/Counterpoint. Submillimeter accuracy in radiosurgery is not possible. , 2013, Medical physics.

[26]  Jonathan M. Morris,et al.  3-Dimensional Printed Anatomic Models as Planning Aids in Complex Oncology Surgery. , 2016, JAMA oncology.

[27]  T. K. Kundra,et al.  Additive Manufacturing Technologies , 2018 .

[28]  James I. Novak.  Self-Directed Learning in the Age of Open Source, Open Hardware and 3D Printing , 2019, Ubiquitous Inclusive Learning in a Digital Era.

[29]  Diana Popescu,et al.  Rapid prototyping for patient-specific surgical orthopaedics guides: A systematic literature review , 2016, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[30]  Charles V Kingsley,et al.  3D-Printed Small-Animal Immobilizer for Use in Preclinical Radiotherapy. , 2015, Journal of the American Association for Laboratory Animal Science : JAALAS.

[31]  Timothy D. Griffiths,et al.  Individually customisable non-invasive head immobilisation system for non-human primates with an option for voluntary engagement , 2016, Journal of Neuroscience Methods.

[32]  Mazher Iqbal Mohammed,et al.  Design and additive manufacturing of a patient specific polymer thumb splint concept , 2018 .

[33]  David W. Rosen,et al.  Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing , 2009 .

[34]  Geoff Delaney,et al.  The role of radiotherapy in cancer treatment , 2005, Cancer.

[35]  Timothy P Hanna,et al.  Estimating the demand for radiotherapy from the evidence: a review of changes from 2003 to 2012. , 2014, Radiotherapy and oncology : journal of the European Society for Therapeutic Radiology and Oncology.

[36]  Andreas K. Maier,et al.  3-D printing based production of head and neck masks for radiation therapy using CT volume data: A fully automatic framework , 2016, 2016 IEEE 13th International Symposium on Biomedical Imaging (ISBI).

[37]  Giovanna Dipasquale,et al.  Improving 3D-printing of megavoltage X-rays radiotherapy bolus with surface-scanner , 2018, Radiation Oncology.

[38]  Kengo Ito,et al.  OC-0271: Positional accuracy valuation of a three dimensional printed device for head and neck immobilisation , 2016 .

[39]  Ian Gibson,et al.  Customised design and development of patient specific 3D printed whole mandible implant , 2016 .

[40]  L BensonChristopher,et al.  Is There a Moore's Law for 3D Printing? , 2018 .

[41]  Niloufar Zarghami,et al.  Note : Immunohistochemical evaluation of mouse brain irradiation targeting accuracy with 3 D-printed immobilization device , 2017 .

[42]  Fiona Mary Robertson.  A Comparison of thermoplastic and 3D printed beam directional shells on viability for external beam radiotherapy and user experience , 2017 .

[43]  Fang-Fang Yin,et al.  Advances in Technology for Intracranial Stereotactic Radiosurgery , 2009, Technology in cancer research & treatment.

[44]  B Sanghera,et al.  Preliminary study of potential for rapid prototype and surface scanned radiotherapy facemask production technique , 2002, Journal of medical engineering & technology.

[45]  G. D. Bell,et al.  Towards the production of radiotherapy treatment shells on 3D printers using data derived from DICOM CT and MRI: preclinical feasibility studies , 2014, Journal of Radiotherapy in Practice.

[46]  Ian Gibson,et al.  Advanced auricular prosthesis development by 3D modelling and multi-material printing , 2017 .

[47]  Tewfik J Bichay,et al.  The Continuous Assessment of Cranial Motion in Thermoplastic Masks During CyberKnife Radiosurgery for Trigeminal Neuralgia , 2016, Cureus.

[48]  T Deans,et al.  Surface laser scanning to routinely produce casts for patient immobilization during radiotherapy. , 2007, Australasian radiology.

[49]  Eugene Wong,et al.  Technical Note: Immunohistochemical evaluation of mouse brain irradiation targeting accuracy with 3D-printed immobilization device. , 2015, Medical physics.

[50]  C. L. Ventola.  Medical Applications for 3D Printing: Current and Projected Uses. , 2014, P & T : a peer-reviewed journal for formulary management.

[51]  Peter Balter,et al.  Material matters: Analysis of density uncertainty in 3D printing and its consequences for radiation oncology , 2018, Medical physics.

[52]  Michael Roumeliotis,et al.  A framework for clinical commissioning of 3D‐printed patient support or immobilization devices in photon radiotherapy , 2018, Journal of applied clinical medical physics.

[53]  Hyun-Taek Lee,et al.  Shape memory alloy (SMA)-based head and neck immobilizer for radiotherapy , 2015, J. Comput. Des. Eng..

[54]  J. Chiou,et al.  Personalized Breast Holder (PERSBRA): A New Cardiac Sparing Technique for Left-sided Whole Breast Irradiation , 2017 .