Clogging of fibrous filters by solid aerosol particles Experimental and modelling study

A fibrous filter is a common cleaning device often used to remove particles from industrial gas streams. The main question which often arises concerns the evolution of the pressure drop and the filtration efficiency during the filter clogging. In the present study, the loading characteristics of HEPA filters have been studied experimentally. The increase of pressure drop and filter efficiency was measured and was linked to both the penetration profile inside the filter bed and the deposit structure observed thanks to scanning electron micrograph. We have also studied the influence of various parameters such as air velocity, particle size, aerosol concentration and filter main characteristics. A depth and surface filtration model has been developed based on the distinction between the fibres of the filter and deposited particles resulting in additional fibres inside the filter or on the filter surface. We can notice a good agreement between model and experiment. Moreover, model very well describes the transition area between depth filtration and cake filtration. This transition from one type of filtration to another is a continuous process. Model describes also the exponential decrease of penetration profile.

[1]  L. Sander,et al.  Diffusion-limited aggregation , 1983 .

[2]  K. W. Lee,et al.  Theoretical Study of Aerosol Filtration by Fibrous Filters , 1982 .

[3]  The Analysis of Dust Cake Structures , 1991 .

[4]  Simon L. Goren,et al.  Model for predicting pressure drop and filtration efficiency in fibrous media , 1968 .

[5]  Peter L. Douglas,et al.  Inertial impaction of aerosol particles on cylinders at intermediate and high reynolds numbers , 1989 .

[6]  A. Kirsch,et al.  Inertial deposition of aerosol particles in model filters at low reynolds numbers , 1977 .

[7]  Chikao Kanaoka,et al.  Pressure drop of air filter with dust load , 1990 .

[8]  A. Kirsch,et al.  Gas flow in high-porous layers of high-dispersed particles , 1975 .

[9]  J. Vendel,et al.  Modelling pressure drop in hepa filters during dynamic filtration , 1999 .

[10]  S. Kuwabara,et al.  The Forces experienced by Randomly Distributed Parallel Circular Cylinders or Spheres in a Viscous Flow at Small Reynolds Numbers , 1959 .

[11]  Matteson,et al.  Filtration: Principles and practices , 1977 .

[12]  A. Renoux,et al.  PENETRATION AND PRESSURE DROP OF A HEPA FILTER DURING LOADING WITH SUBMICRON LIQUID PARTICLES , 1992 .

[13]  Bandaru V. Ramarao,et al.  Calculation of single fiber efficiencies for interception and impaction with superposed brownian motion , 1994 .

[14]  Alkiviades C. Payatakes,et al.  Dendritic deposition of aerosols by convective Brownian diffusion for small, intermediate and high particle Knudsen numbers , 1980 .

[15]  J.I.T. Stenhouse,et al.  Experimental results of solid monodisperse particle clogging of fibrous filters , 1994 .

[16]  C. Lee,et al.  Aerosol filtration by fibrous filters at intermediate Reynolds numbers (≤ 100) , 1974 .

[17]  C. Billings.  Effects of Particle Accumulation in Aerosol Filtration , 1966 .