Grazing contact researches for a spindle-ball bearing system

This article combines the three-order harmonic balance method and eight-order Taylor expansion technique to give the qualitative analysis of responses for the spindle-ball bearing system. The effects of the bearing clearance and initial position of rotor on the frequency–response curves are investigated. As the number of contact balls alters due to the combining actions of the bearing clearance and initial position of rotor, the grazing phenomenon occurs and the frequency–response curve undergoes a major change. The system’s characteristic coefficients are also found to sharply grow at the point the number of contact balls alters. They therefore can be treated as the signs to indicate the occurrence of the grazing phenomenon, which is helpful for the researchers to study the non-linear and non-smooth properties of the spindle-ball bearing system.

[1]  Grazing bifurcations in multibody systems , 1997 .

[2]  Ekaterina Pavlovskaia,et al.  Bifurcation analysis of an impact oscillator with a one-sided elastic constraint near grazing , 2010 .

[3]  Daolin Xu,et al.  The use of control to eliminate subharmonic and chaotic impacting motions of a driven beam , 1997 .

[4]  H. Rahnejat,et al.  Vibration response of wavy surfaced disc in elastohydrodynamic rolling contact , 1990 .

[5]  David J. Wagg,et al.  Use of control to maintain period-1 motions during wind-up or wind-down operations of an impacting driven beam , 1998 .

[6]  Brandon C. Gegg,et al.  Stick and non-stick periodic motions in periodically forced oscillators with dry friction , 2006 .

[7]  F P Wardle,et al.  Vibration Forces Produced by Waviness of the Rolling Surfaces of Thrust Loaded Ball Bearings Part 1: Theory , 1988 .

[8]  R. Gohar,et al.  The effects of number of balls and preload on vibrations associated with ball bearings , 1997 .

[9]  S. P. Harsha,et al.  Nonlinear dynamic response of a balanced rotor supported by rolling element bearings due to radial internal clearance effect , 2006 .

[10]  Albert C. J. Luo,et al.  Periodic motions and grazing in a harmonically forced, piecewise, linear oscillator with impacts , 2005 .

[11]  Hiroshi Shimizu,et al.  Vibration of Rotor Based on Ball Bearing : 2nd Report, Static Stiffness of Ball Bearing Containing a Small Number of Balls , 1967 .

[12]  B. Stone,et al.  The Sources of Damping in Rolling Element Bearings under Oscillating Conditions , 1983 .

[13]  Harry Dankowicz,et al.  Continuous and discontinuous grazing bifurcations in impacting oscillators , 2006 .

[14]  C. Lamarque,et al.  How to Improve Confidence in Calculations for Non-smooth Dynamical Systems , 2008 .

[15]  Detection of Grazing Orbits and Incident Bifurcations of a Forced Continuous, Piecewise-Linear Oscillator , 1995 .

[16]  F P Wardle,et al.  Vibration Forces Produced by Waviness of the Rolling Surfaces of Thrust Loaded Ball Bearings Part 2: Experimental Validation , 1988 .

[17]  N Jones,et al.  Inelastic failure of fully clamped beams and circular plates under impact loading , 2002 .

[18]  G. Meng,et al.  Multiple Resonances and Nonlinear Behaviors of a Spindle Ball Bearings System with 3/2 Nonlinear Term , 2009 .

[19]  S. Harsha.  Non-linear dynamic response of a balanced rotor supported on rolling element bearings , 2005 .

[20]  Homer Rahnejat,et al.  Vibration Modeling of Rotating Spindles Supported by Lubricated Bearings , 2002 .

[21]  Alan R. Champneys,et al.  Chaos and Period-Adding; Experimental and Numerical Verification of the Grazing Bifurcation , 2004, J. Nonlinear Sci..

[22]  Guanrong Chen,et al.  Grazing Bifurcation in the Response of Cracked Jeffcott Rotor , 2004 .

[23]  Xinhua Long,et al.  Nonlinear response and stability of a spindle system supported by ball bearings , 2010 .

[24]  Albert C. J. Luo,et al.  Periodic motions in a simplified brake system with a periodic excitation , 2009 .

[25]  Guanrong Chen,et al.  Nonlinear responses of a rub-impact overhung rotor , 2004 .

[26]  Z. C. Feng,et al.  Parameter dependence of the impact dynamics of thin plates , 2000 .

[27]  Albert C. J. Luo,et al.  Periodic Motions and Stability in a Semi-Active Suspension System with MR Damping , 2007 .

[28]  Homer Rahnejat,et al.  The Vibrations of Radial Ball Bearings , 1985 .

[29]  Character of the map for switched dynamical systems for observations on the switching manifold , 2008 .

[30]  Homer Rahnejat,et al.  Computational modelling of problems in contact dynamics , 1985 .

[31]  Gouhei Tanaka,et al.  Grazing-induced crises in hybrid dynamical systems , 2009 .

[32]  P. Kowalczyk,et al.  Small-scale instabilities in dynamical systems with sliding , 2008, 0811.1944.

[33]  Hongguang Li,et al.  Non-Linear Dynamics of an Unbalanced Machine-Tool Spindle System Supported By Ball Bearings , 2008 .

[34]  B. Zahawi,et al.  Investigation of the near-grazing behavior in hard-impact oscillators using model-based TS fuzzy approach , 2012 .

[35]  R. Gohar,et al.  On the performance of multi-support spindle-bearing assemblies , 2002 .

[36]  Michael M. Khonsari,et al.  Application of analysis of variance to wet clutch engagement , 2002 .

[37]  T. A. Harris,et al.  Rolling Bearing Analysis , 1967 .

[38]  Alan R. Champneys,et al.  Normal form maps for grazing bifurcations in n -dimensional piecewise-smooth dynamical systems , 2001 .

[39]  A. Palmgren,et al.  Dynamic capacity of rolling bearings , 1947 .

[40]  José Manoel Balthazar,et al.  Suppressing grazing chaos in impacting system by structural nonlinearity , 2008 .

[41]  F. Chu,et al.  BIFURCATION AND CHAOS IN A RUB-IMPACT JEFFCOTT ROTOR SYSTEM , 1998 .

[42]  Brandon C. Gegg,et al.  Grazing bifurcations of a harmonically excited oscillator moving on a time-varying translation belt , 2008 .

[43]  A. Palmgren.  Ball and roller bearing engineering , 1945 .

[44]  Guang Meng,et al.  Nonlinear response and nonsmooth bifurcations of an unbalanced machine-tool spindle-bearing system , 2008 .

[45]  S. J. Lacey,et al.  Dynamic and static characteristics of a wide speed range machine tool spindle , 1983 .

[46]  G. Meng,et al.  Frequency response curves of a spindle bearings system with non-linear and non-smooth terms , 2013 .

[47]  Homer Rahnejat,et al.  A five degrees of freedom analysis of vibrations in precision spindles , 1990 .

[48]  Homer Rahnejat,et al.  An Experimental Investigation into Bearing-Induced Spindle Vibration , 1995 .

[49]  Ravi Prakash,et al.  The effect of speed of balanced rotor on nonlinear vibrations associated with ball bearings , 2003 .

[50]  A. P. Ivanov,et al.  Bifurcations in impact systems , 1996 .

[51]  Ali H. Nayfeh,et al.  Nonlinear Dynamics of an Electrically Driven Impact Microactuator , 2005 .

[52]  Cheng-Chi Wang.  Bifurcation Analysis of High Speed Spindle Air Bearings , 2011 .

[53]  P. K. Kankar,et al.  Stability analysis of a rotor bearing system due to surface waviness and number of balls , 2004 .

[54]  N Aktärk,et al.  The effect of ball size variation on vibrations associated with ball-bearings , 1998 .

[55]  H. Dankowicz,et al.  Analysis of grazing bifurcations of quasiperiodic system attractors , 2006 .

[56]  PERIODIC MOTIONS AND TRANSITION PHENOMENA IN A TWO-DEGREES-OF-FREEDOM SYSTEM WITH PERFECTLY PLASTIC IMPACT , 1999 .

[57]  Balakumar Balachandran,et al.  Grazing bifurcations in an elastic structure excited by harmonic impactor motions , 2008 .

[58]  Saeid Vafaei,et al.  Indicated repeatable runout with wavelet decomposition (IRR-WD) for effective determination of bearing-induced vibration , 2003 .

[59]  R. Gohar,et al.  On the effects of bearing settings on the dynamic performance of a three-bearing machine tool spindle assembly , 2002 .

[60]  E. Yhland,et al.  A Linear Theory of Vibrations Caused by Ball Bearings With Form Errors Operating at Moderate Speed , 1992 .

[61]  Homer Rahnejat,et al.  Bearing induced vibration in precision high speed routing spindles , 2000 .

[62]  R. I. Zadoks,et al.  A NUMERICAL STUDY OF AN IMPACT OSCILLATOR WITH THE ADDITION OF DRY FRICTION , 1995 .