论文信息 - CODE TESLA FOR MODELING AND DESIGN OF HIGH-POWER HIGH-EFFICIENCY KLYSTRONS

CODE TESLA FOR MODELING AND DESIGN OF HIGH-POWER HIGH-EFFICIENCY KLYSTRONS

Abstract : This work gives an overview of the main features of the 2.5D large-signal code TESLA and its capabilities for the modelling single-beam and multiple-beam klystrons as high-power RF sources. These sources are widely used or proposed to be used in accelerators in the future. Comparison of TESLA modelling results with experimental data for a few multiple-beam klystrons are shown.

Baruch Levush | Simon J. Cooke | Igor A. Chernyavskiy | A N Vlasov | T M Antonsen

[1] Baruch Levush,et al. MAGY: a time-dependent code for simulation of slow and fast microwave sources , 1998 .

[2] David Chernin,et al. Modeling of a G-band extended interaction klystron using the large-signal code TESLA , 2010, 35th International Conference on Infrared, Millimeter, and Terahertz Waves.

[3] Thomas M. Antonsen,et al. Simulation of microwave devices with external cavities using MAGY , 2002 .

[4] T. Antonsen,et al. Parallel Simulation of Independent Beam-Tunnels in Multiple-Beam Klystrons Using TESLA , 2008, IEEE Transactions on Plasma Science.

[5] B. Levush,et al. Demonstration of an S-band, 600-kW fundamental-mode multiple-beam klystron , 2005, IEEE Electron Device Letters.

[6] B. Levush,et al. Experimental Study and Analysis of an S-Band Multiple-Beam Klystron With 6% Bandwidth , 2009, IEEE Transactions on Electron Devices.

[7] B. Levush,et al. Simulation of Klystrons With Slow and Reflected Electrons Using Large-Signal Code TESLA , 2007, IEEE Transactions on Electron Devices.