Coordinated control strategy for the common-rail pressure using a metering unit and a pressure control valve in diesel engines

Since the fuel injection pressure in diesel engines is one of the main parameters which determine the emissions and the fuel efficiency, a precise control algorithm for the common-rail pressure is a required priority for improving the engine performances. This paper proposes a coordinated common-rail pressure control strategy for passenger car diesel engines using a metering unit and a pressure control valve. The metering unit, which is located at the high-pressure pump, adjusts the inlet fuel flow for the common rail using a first-order polynomial equation that describes the relation between the inlet fuel flow and the outlet fuel flow for the common rail. The injected fuel flow is used as the input for the control algorithm to determine the driving current of the metering unit. The designed control strategy for the metering unit effectively reduces the rail pressure wave generated by the high-pressure pump. Furthermore, since the inlet fuel flow is adjusted according to the injected fuel flow, the proposed control algorithm shows a robust performance to the injection disturbance. The pressure control valve located on the common rail adjusts the outlet fuel flow of the common rail. The control algorithm for the pressure control valve is designed using quantitative feedback theory to assure robustness even when the variation in the plant characteristics (such as the static gain and the time constant) is caused by the metering unit operation. Engine experiments proved that the proposed control strategy can reduce the variation in the steady-state rail pressure to less than 10 bar; in addition, the proposed rail pressure controller has a good degree of consistency under various engine operating conditions.

[1]  Withit Chatlatanagulchai,et al.  Robust Common-Rail Pressure Control for a Diesel-Dual-Fuel Engine Using QFT-Based Controller , 2009 .

[2]  Mohammed Chadli,et al.  Multivariable control systems - an engineering approach , 2003, Autom..

[3]  Wang Jun,et al.  Studies of control strategies for high pressure common rail diesel engine , 2008, 2008 IEEE Vehicle Power and Propulsion Conference.

[4]  Wang Ping,et al.  Effect of Common Rail System on Vehicle Engine Combustion Performance , 2010, 2010 International Conference on Optoelectronics and Image Processing.

[5]  Keiki Tanabe,et al.  Effect of Fuel Injection Rate Control on Reduction of Emissions and Fuel Consumption in a Heavy Duty DI Diesel Engine , 2005 .

[6]  Olivier Sename,et al.  MODELLING OF A DIESEL ENGINE COMMON RAIL INJECTION SYSTEM , 2005 .

[7]  Alberto L. Sangiovanni-Vincentelli,et al.  Hybrid modelling and control of the common rail injection system , 2007, Int. J. Control.

[8]  Jianjun Qin,et al.  Research and applications for control strategy of high-pressure Common Rail injection system in diesel engine , 2008, 2008 IEEE Vehicle Power and Propulsion Conference.

[9]  Dimitrios T. Hountalas,et al.  Simulation technique for the fuel injection system of diesel engines , 1991 .

[10]  Giovanni Fiengo,et al.  A model-based gain scheduling approach for controlling the common-rail system for GDI engines , 2012, Int. J. Control.

[11]  Giovanni Fiengo,et al.  A control oriented model of a Common-Rail System for Gasoline Direct Injection engine , 2009, Proceedings of the 48h IEEE Conference on Decision and Control (CDC) held jointly with 2009 28th Chinese Control Conference.

[12]  Steven J. Rasmussen,et al.  Quantitative feedback theory: fundamentals and applications: C. H. Houpis and S. J. Rasmussen; Marcel Dekker, New York, 1999, ISBN: 0-8247-7872-3 , 2001, Autom..

[13]  Fengjun Yan,et al.  Common rail injection system on-line parameter calibration for precise injection quantity control , 2010, Proceedings of the 2010 American Control Conference.

[14]  Arturo de Risi,et al.  Experimental Analysis of Common Rail Pressure Wave Effect on Engine Emissions , 2005 .

[15]  Wootaik Lee,et al.  AUTOSAR-ready Light Software Architecture for Automotive Embedded Control Systems , 2013 .

[16]  Myoungho Sunwoo,et al.  Robust Common Rail Pressure Control for Diesel Engines using a Quantitative Feedback Theory , 2012 .

[17]  Umberto Montanaro,et al.  Adaptive Tracking Control of a Common Rail Injection System for Gasoline Engines: A Discrete-Time Integral Minimal Control Synthesis Approach , 2013, IEEE Transactions on Control Systems Technology.

[18]  Wootaik Lee,et al.  Application Software Modeling and Integration Methodology using AUTOSAR-ready Light Software Architecture , 2012 .

[19]  Myoungho Sunwoo,et al.  Common rail pressure controller for diesel engines using an empirical model , 2012, 2012 IEEE Vehicle Power and Propulsion Conference.

[20]  Withit Chatlatanagulchai,et al.  Quantitative Feedback Control of Air Path in Diesel-Dual-Fuel Engine , 2010 .

[21]  Jeng-Tzong Chen,et al.  A study on the multiple reciprocity method and complex-valued formulation for the Helmholtz equation , 1998 .

[22]  Zongxuan Sun,et al.  Rotational angle based pressure control of a common rail fuel injection system for internal combustion engines , 2009, 2009 American Control Conference.

[23]  Kibum Kim,et al.  Spray characteristics of four-hole injectors used for a hydrocarbon lean nitrogen oxide catalyst system in a diesel engine , 2012 .

[24]  Alessandro Rizzo,et al.  Nonlinear modelling and control of a common rail injection system for diesel engines , 2007 .

[25]  Umberto Montanaro,et al.  An MRAC Approach for Tracking and Ripple Attenuation of the Common Rail Pressure for GDI Engines , 2011 .

[26]  Rolf D. Reitz,et al.  Mechanism of Soot and NOx Emission Reduction Using Multiple-injection in a Diesel Engine , 1996 .

[27]  Myoungho Sunwoo,et al.  Common Rail Pressure Control Algorithm for Passenger Car Diesel Engines Using Quantitative Feedback Theory , 2014 .

[28]  Giovanni Fiengo,et al.  Design and experimental validation of a model-based injection pressure controller in a common rail system for GDI engine , 2011, Proceedings of the 2011 American Control Conference.

[29]  C. H. Houpis,et al.  Refined design method for sampled-data control systems: the pseudo-continuous-time (PCT) control system design , 1985 .

[30]  Xuan Xie,et al.  Rail pressure control of common rail diesel engine based on RBF neural network adaptive PID controller , 2011, Proceedings of 2011 International Conference on Electronic & Mechanical Engineering and Information Technology.