Application of Ba0.5Sr0.5Co0.8Fe0.2O3−δ membranes in an oxy-fuel combustion reactor

Oxygen separation from air through ceramic ion transport membranes is anticipated to be one of the technologies that can make fossil fuel power plants to operate without carbon dioxide (CO2) emission. Consequently, the level of carbon emission in the atmosphere, which causes global warming, could be contained. The most promising material for such ion transport membranes is the Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF), which has been reported to have the highest oxygen permeation flux. However, lack of chemical stability of these membranes in CO2 rich environment is recognized as a major problem. In this study, the performance and stability of BSCF membranes in an oxy-fuel combustor have been evaluated using methane gas. The flow rate of the methane (CH4) gas has been optimized to the value of 0.65 ml/min at 920 °C. Under this flow rate, the BSCF stability has also been evaluated. The study has shown that the BSCF stability depends on the amount of excess-oxygen in the reactor. If all oxygen, generated by the membrane, is consumed during the combustion reaction then BSCF starts to deteriorate and its permeability decreases with time. On the other hand, when the combustion reaction does not consume all oxygen, and a minimum excess-oxygen is retained, the BSCF remains stable with constant oxygen flux. This fact has been established using two BSCF membranes with different thicknesses and same exposed area of 113 mm2. The first membrane has 1.4 mm thickness and its initial oxygen permeability under combustion reaction is 0.83 µmol cm-2 s−1 with an excess of 7.5% oxygen. After 190 h of combustion, the oxygen permeability has dropped to 0.76 µmol cm−2 s−1 (7.9% reduction). The second BSCF membrane has a thickness of 1.0 mm produces 0.91 µmol cm−2 s−1 with a 15% excess oxygen during the combustion reaction. This membrane has shown excellent stability for more than 200 h of complete methane combustion. This is a remarkable result which shows that a carefully controlled fuel volume introduced in a BSCF membrane-reactor provides high oxygen output and excellent stability for a long period of time.

[1]  Kirsten Foy.  Investigation into the Possible Use of an Oxygen Ion Transport Membrane Combustion Unit in an Oxyfired Power Plant , 2007 .

[2]  Shaomin Liu,et al.  Palladium surface modified La0.6Sr0.4Co0.2Fe0.8O3-d hollow fibres for oxygen separation , 2011 .

[3]  T. Ishihara,et al.  Mixed electronic–oxide ionic conductivity and oxygen permeating property of Fe-, Co- or Ni-doped LaGaO3 perovskite oxide , 2000 .

[4]  Zongping Shao,et al.  Investigation of the permeation behavior and stability of a Ba0.5Sr0.5Co0.8Fe0.2O3−δ oxygen membrane , 2000 .

[5]  Stefan Engels,et al.  Oxygen permeation and stability investigations on MIEC membrane materials under operating conditions , 2011 .

[6]  W. Haije,et al.  Structure and oxygen stoichiometry of SrCo0.8Fe0.2O3−δ and Ba0.5Sr0.5Co0.8Fe0.2O3−δ , 2006 .

[7]  M. Cheng,et al.  A temperature programmed desorption investigation on the interaction of Ba0.5Sr0.5Co0.8Fe0.2O3−δ perovskite oxides with CO2 in the absence and presence of H2O and O2 , 2008 .

[8]  Xing Hu,et al.  Enhancing the oxygen permeability of Ba0.5Sr0.5Co0.8Fe0.2O5 + δ membranes by coating RBaCo2O5 + δ(R= Pr, Nd, Sm, Gd) layers , 2010 .

[9]  E. Eddings,et al.  Performance and post-test characterization of an OTM system in an experimental coal gasifier , 2016 .

[10]  Yang Shao-Horn,et al.  Effect of microstructure and thickness on oxygen permeation of La2NiO4+δ membranes , 2016 .

[11]  G. Choi,et al.  Oxygen permeation of BSCF membrane with varying thickness and surface coating , 2010 .

[12]  Alexander Mitsos,et al.  A review of recent developments in carbon capture utilizing oxy‐fuel combustion in conventional and ion transport membrane systems , 2011 .

[13]  Henricus J.M. Bouwmeester,et al.  Dense Ceramic Membranes for Oxygen Separation , 1997, The CRC Handbook of SOLID STATE Electrochemistry.

[14]  Haihui Wang,et al.  Novel cobalt-free oxygen permeable membrane. , 2004, Chemical communications.

[15]  A. Feldhoff,et al.  Influence of CO2 on the oxygen permeation performance and the microstructure of perovskite-type (Ba0.5Sr0.5)(Co0.8Fe0.2)O3−δ membranes , 2007 .

[16]  Haihui Wang,et al.  Oxy‐fuel combustion for CO2 capture using a CO2‐tolerant oxygen transporting membrane , 2013 .

[17]  Stefan Engels,et al.  OXYCOAL-AC: Towards an integrated coal-fired power plant process with ion transport membrane-based oxygen supply , 2010 .

[18]  K. Wiik,et al.  Structural instability of cubic perovskite BaxSr1 − xCo1 − yFeyO3 − δ , 2008 .

[19]  N. Yamazoe,et al.  Mixed ionic-electronic conductivity of La1−xSrxCo1−yFeyO3−δ perovskite-type oxides , 1988 .

[20]  Michael Modigell,et al.  Oxyfuel coal combustion by efficient integration of oxygen transport membranes , 2011 .

[21]  H. Jeong,et al.  Chemically stable perovskites as cathode materials for solid oxide fuel cells: La-doped Ba0.5Sr0.5Co0.8Fe0.2O(3-δ). , 2014, ChemSusChem.

[22]  Chusheng Chen,et al.  Oxygen-selective membranes integrated with oxy-fuel combustion , 2014 .

[23]  Muhong Wang,et al.  Global warming and global dioxide emission : An empirical study , 1996 .

[24]  Sang do Park,et al.  Oxygen permeation and stability of La0.6Sr0.4TixFe1−xO3−δ (x = 0.2 and 0.3) membrane , 2009 .

[25]  J. Yi,et al.  CO2 corrosion and recovery of perovskite-type BaCo1−x−yFexNbyO3−δ membranes , 2013 .

[26]  X. Tan,et al.  Improvement of oxygen permeation in perovskite hollow fibre membranes by the enhanced surface exchange kinetics , 2013 .

[27]  Jaka Sunarso,et al.  Mixed ionic-electronic conducting (MIEC) ceramic-based membranes for oxygen separation , 2008 .

[28]  Hartmut Spliethoff,et al.  Assessment of oxy-fuel, pre- and post-combustion-based carbon capture for future IGCC plants , 2012 .

[29]  Haihui Wang,et al.  Enhancement of oxygen permeation through U-shaped K2NiF4-type oxide hollow fiber membranes by surface modifications , 2013 .

[30]  F. Wang,et al.  Effect of Nb doping on the chemical stability of BSCF-based solid solutions , 2014 .

[31]  A. Kovalevsky,et al.  Oxygen permeability and stability of asymmetric multilayer Ba0.5Sr0.5Co0.8Fe0.2O3 − δ ceramic membranes , 2011 .

[32]  R. B. Slimane,et al.  Progress in carbon dioxide separation and capture: a review. , 2008, Journal of environmental sciences.

[33]  H. Bouwmeester,et al.  Chapter 10 Dense ceramic membranes for oxygen separation , 1996 .

[34]  K. Efimov,et al.  Ca-containing CO2-tolerant perovskite materials for oxygen separation , 2012 .

[35]  A. Feldhoff,et al.  A Cobalt‐Free Oxygen‐Permeable Membrane Based on the Perovskite‐Type Oxide Ba0.5Sr0.5Zn0.2Fe0.8O3–δ , 2005 .

[36]  S. Uhlenbruck,et al.  Application of Thin‐Film Manufacturing Technologies to Solid Oxide Fuel Cells and Gas Separation Membranes , 2013 .

[37]  Wim G. Haije,et al.  Viability of mixed conducting membranes for oxygen production and oxyfuel processes in power production , 2009 .

[38]  M. Schulz,et al.  Assessment of CO 2 stability and oxygen flux of oxygen permeable membranes , 2011 .

[39]  C. Tsai.  Dense perovskite membrane reactors for partial oxidation of methane to syngas , 1997 .

[40]  R. Castillo,et al.  Thermodynamic analysis of a hard coal oxyfuel power plant with high temperature three-end membrane for air separation , 2011 .