3D numerical study on shell side heat transfer and flow characteristics of rod-baffle heat exchangers with spirally corrugated tubes

[1]  C. C. Gentry.  RODbaffle heat exchanger technology , 1990 .

[2]  D. Missirlis,et al.  Investigation of the thermal efficiency of a staggered elliptic-tube heat exchanger for aeroengine applications , 2010 .

[3]  Wen-Quan Tao,et al.  The field synergy (coordination) principle and its applications in enhancing single phase convective heat transfer , 2005 .

[4]  Guohui Gan,et al.  Experimental measurement and numerical simulation of horizontal-coupled slinky ground source heat exchangers , 2010 .

[5]  Nasir Hayat,et al.  CFD applications in various heat exchangers design: A review , 2012 .

[6]  W. Liu,et al.  Mechanism and numerical analysis of heat transfer enhancement in the core flow along a tube , 2008 .

[7]  Petr Stehlík,et al.  Helical Baffles in Shell-and-Tube Heat Exchangers, Part I: Experimental Verification , 1996 .

[8]  Wei Liu,et al.  Parametric study on turbulent heat transfer and flow characteristics in a circular tube fitted with louvered strip inserts , 2012 .

[9]  L. Wei.  FORMING AN EQUIVALENT THERMAL BOUNDARY LAYER FOR FULLY-DEVELOPED LAMINAR TUBE FLOW AND ITS FIELD SYNERGY ANALYSIS , 2007 .

[10]  Mingtian Xu,et al.  The application of field synergy number in shell-and-tube heat exchanger optimization design , 2009 .

[11]  Wang Yongqing,et al.  Numerical and experimental investigation of shellside characteristics for RODbaffle heat exchanger , 2008 .

[12]  Bu-Xuan Wang,et al.  A novel concept for convective heat transfer enhancement , 1998 .

[13]  Wei Liu,et al.  Enhancing heat transfer in the core flow by using porous medium insert in a tube , 2010 .

[14]  V. D. Zimparov,et al.  Heat transfer and friction characteristics of spirally corrugated tubes for power plant condensers—1. Experimental investigation and performance evaluation , 1991 .

[15]  Wei Liu,et al.  Physical quantity synergy in laminar flow field of convective heat transfer and analysis of heat transfer enhancement , 2009 .

[16]  Wei Liu,et al.  A numerical study on thermo-hydraulic characteristics of turbulent flow in a circular tube fitted with conical strip inserts , 2011 .

[17]  Yasuyoshi Kato,et al.  High performance printed circuit heat exchanger , 2007 .

[18]  Wen-Quan Tao,et al.  3D numerical simulation on shell-and-tube heat exchangers with middle-overlapped helical baffles and continuous baffles – Part II: Simulation results of periodic model and comparison between continuous and noncontinuous helical baffles , 2009 .

[19]  Wei Liu,et al.  Effects of upwind area of tube inserts on heat transfer and flow resistance characteristics of turbulent flow , 2013 .

[20]  Wei Liu,et al.  Experimental investigation of shell-and-tube heat exchanger with a new type of baffles , 2011 .

[21]  Liu Wei,et al.  Physical quantity synergy in laminar flow field and its application in heat transfer enhancement , 2009 .

[22]  Wang Ying.  Analysis of Flow and Heat Transfer in Rod Baffle Heat Exchangers With Rods of Variable Sections , 2012 .

[23]  Wei Liu,et al.  Numerical studies on heat transfer and friction factor characteristics of a tube fitted with helical screw-tape without core-rod inserts , 2013 .

[24]  Petr Stehlík,et al.  Comparison of correction factors for shell-and-tube heat exchangers with segmental or helical baffles , 1994 .

[25]  Suyi Huang,et al.  Physical quantity synergy in the field of turbulent heat transfer and its analysis for heat transfer enhancement , 2010 .

[26]  Wen-Quan Tao,et al.  3D numerical simulation on shell-and-tube heat exchangers with middle-overlapped helical baffles and continuous baffles – Part I: Numerical model and results of whole heat exchanger with middle-overlapped helical baffles , 2009 .

[27]  Wei Liu,et al.  A numerical study on heat transfer and friction factor characteristics of laminar flow in a circular tube fitted with center-cleared twisted tape , 2011 .

[28]  XinGang Liang,et al.  Experimental study on convective heat transfer in alternating elliptical axis tubes , 2005 .

[29]  Wang Ying.  Numerical Simulation of Rod Baffle Heat Exchangers and its Optimum Design , 2011 .

[30]  R. Smyth.  A Comparative Assessment of RODbaffle Shell-and-Tube Heat Exchangers , 1981 .

[31]  Wei Liu,et al.  Numerical studies on heat transfer and flow characteristics for laminar flow in a tube with multiple regularly spaced twisted tapes , 2012 .

[32]  Göran Hellström,et al.  CFD-modelling of natural convection in a groundwater-filled borehole heat exchanger , 2010 .

[33]  Wei Liu,et al.  Application of a multi-field synergy principle in the performance evaluation of convective heat transfer enhancement in a tube , 2012 .

[34]  Wei Liu,et al.  A comparison of four numerical modeling approaches for enhanced shell-and-tube heat exchangers with experimental validation , 2014 .