A method to estimate the potential of rooftop photovoltaic power generation for a region

Abstract At present, solar energy is receiving heightened attention as a potentially widespread approach to sustainable energy production, and the study of photovoltaic (PV) technology has expanded globally. The amount of PV power generation is growing quickly. This paper proposed a method to calculate the rooftop PV potential for a city or region by estimating the total useful roof area for PV installations and incident annual solar radiation. The aerial photo data of a city and pixel analysis techniques with a C ++ program were used to estimate the rooftop PV potential of an example case, Osaka City, Japan in this study. The total useful area of PV system is estimated as 42,000,000 ± 9,000,000 m 2 in Osaka. If the efficiency of PV power generation is assumed to be a value of 0.20 in this contribution, PV power generation could supply about 56% of the entire electrical power demand in the commercial sector, about 12,400,000 MWh/year, or could supply about 34% of the entire electrical power demand in the commercial and industrial sectors, about 20,300,000 MWh/year.

[1]  Pietro Asinari,et al.  Scalable methodology for the photovoltaic solar energy potential assessment based on available roof surface area: Further improvements by ortho-image analysis and application to Turin (Italy) , 2011 .

[2]  G. Štumberger,et al.  Rating of roofs’ surfaces regarding their solar potential and suitability for PV systems, based on LiDAR data , 2013 .

[3]  L. Bergamasco,et al.  Scalable methodology for the photovoltaic solar energy potential assessment based on available roof surface area: application to Piedmont Region (Italy) , 2011 .

[4]  Melvin Pomerantz,et al.  Solar access of residential rooftops in four California cities , 2009 .

[5]  N. Fueyo,et al.  A method for estimating the geographical distribution of the available roof surface area for large-scale photovoltaic energy-potential evaluations , 2008 .

[6]  Jianping Wu,et al.  Investigating impacts of urban morphology on spatio-temporal variations of solar radiation with airborne LIDAR data and a solar flux model: a case study of downtown Houston , 2009 .

[7]  O. Şenkal.  Modeling of solar radiation using remote sensing and artificial neural network in Turkey , 2010 .

[8]  Norbert Pfeifer,et al.  Automatic Roof Plane Detection and Analysis in Airborne Lidar Point Clouds for Solar Potential Assessment , 2009, Sensors.

[9]  N. Lewis.  Toward Cost-Effective Solar Energy Use , 2007, Science.

[10]  Luis Pérez-Lombard,et al.  A review on buildings energy consumption information , 2008 .

[11]  G. Štumberger,et al.  Buildings roofs photovoltaic potential assessment based on LiDAR (Light Detection And Ranging) data , 2014 .

[12]  J. Kaňuk,et al.  Assessment of photovoltaic potential in urban areas using open-source solar radiation tools , 2009 .

[13]  J. Michalsky,et al.  Modeling daylight availability and irradiance components from direct and global irradiance , 1990 .

[14]  Zhengming Zhao,et al.  Grid-connected photovoltaic power systems: Technical and potential problems—A review , 2010 .

[15]  Girish Kumar Singh,et al.  Solar power generation by PV (photovoltaic) technology: A review , 2013 .

[16]  T. Santos,et al.  Photovoltaic potential in a Lisbon suburb using LiDAR data , 2012 .

[17]  Joshua M. Pearce,et al.  Incorporating Shading Losses in Solar Photovoltaic Potential Assessment at the Municipal Scale , 2012, Solar Energy.

[18]  M. Brito,et al.  Solar energy potential on roofs and facades in an urban landscape , 2013 .