Nanoporous separator and low fuel concentration to minimize crossover in direct methanol laminar flow fuel cells

Laminar flow fuel cells (LFFCs) overcome some key issues - most notably fuel crossover and water man- agement - that typically hamper conventional polymer electrolyte-based fuel cells. Here we report two methods to further minimize fuel crossover in LFFCs: (i) reducing the cross-sectional area between the fuel and electrolyte streams, and (ii) reducing the driving force of fuel crossover, i.e. the fuel concentration gradient. First, we integrated a nanoporous tracketch separator at the interface of the fuel and electrolyte streams in a single-channel LFFC to dramatically reduce the cross-sectional area across which methanol can diffuse. Maximum power densities of 48 and 70 mW cm−2 were obtained without and with a sep- arator, respectively, when using 1 M methanol. This simple design improvement reduces losses at the cathode leading to better performance and enables thinner cells, which is attractive in portable applica- tions. Second, we demonstrated a multichannel cell that utilizes low methanol concentrations (<300 mM) to reduce the driving force for methanol diffusion to the cathode. Using 125 mM methanol as the fuel, a maximum power density of 90 mW cm−2 was obtained. This multichannel cell further simplifies the LFFC design (one stream only) and its operation, thereby extending its potential for commercial application. © 2010 Elsevier B.V. All rights reserved.