Operational Flexibility of Small-Scale Electricity-Coupled Heat Generating Units

Heat generation that is coupled with electricity usage, like combined heat and power generators or heat pumps, can provide operational flexibility to the electricity sector. In order to make use of this in an optimized way, the flexibility that can be provided by such plants needs to be properly quantified. This paper proposes a method for quantifying the flexibility provided through a cluster of such heat generators. It takes into account minimum operational time and minimum down-time of heat generating units. Flexibility is defined here as the time period over which plant operation can be either delayed or forced into operation, thus providing upward or downward regulation to the power system on demand. Results for one case study show that a cluster of several smaller heat generation units does not provide much more delayed operation flexibility than one large unit with the same power, while it more than doubles the forced operation flexibility. Considering minimum operational time and minimum down-time of the units considerably limits the available forced and delayed operation flexibility, especially in the case of one large unit.

[1]  Sebastian Stinner,et al.  Quantifying the operational flexibility of building energy systems with thermal energy storages , 2016 .

[2]  Rp Rick Kramer,et al.  Quantifying demand flexibility of power-to-heat and thermal energy storage in the control of building heating systems , 2018 .

[3]  Pierluigi Siano,et al.  A survey of industrial applications of Demand Response , 2016 .

[4]  C. J. Warmer,et al.  Virtual power plant field experiment using 10 micro-CHP units at consumer premises , 2008 .

[5]  R. Hakvoort,et al.  Managing electric flexibility from Distributed Energy Resources: A review of incentives for market design , 2016 .

[6]  Anke Weidlich,et al.  Optimal microgrid scheduling with peak load reduction involving an electrolyzer and flexible loads , 2016 .

[7]  Hans Christian Gils,et al.  Assessment of the theoretical demand response potential in Europe , 2014 .

[8]  João Neves,et al.  A Literature Review of Methodologies Used to Assess the Energy Flexibility of Buildings , 2016 .

[9]  Goran Andersson,et al.  Analyzing operational flexibility of electric power systems , 2014 .

[10]  Hartmut Schmeck,et al.  Modeling flexibility using artificial neural networks , 2018 .

[11]  David Fischer,et al.  Model-based flexibility assessment of a residential heat pump pool , 2017 .

[12]  Stamatis Karnouskos,et al.  Smart Houses in the Smart Grid: Developing an interactive network. , 2014, IEEE Electrification Magazine.

[13]  Veit Hagenmeyer,et al.  Technical Potential of Buildings in Germany as Flexible Power‐to‐Heat Storage for Smart‐Grid Operation , 2017 .

[14]  Thomas Nuytten,et al.  Flexibility of a combined heat and power system with thermal energy storage for district heating , 2013 .

[15]  Geert Deconinck,et al.  Applying machine learning techniques for forecasting flexibility of virtual power plants , 2016, 2016 IEEE Electrical Power and Energy Conference (EPEC).

[16]  Palle Andersen,et al.  Maximizing storage flexibility in an aggregated heat pump portfolio , 2014, 2014 IEEE Conference on Control Applications (CCA).

[17]  Francois Bouffard,et al.  Flexibility Envelopes for Power System Operational Planning , 2014, IEEE Transactions on Sustainable Energy.

[18]  Hendrik Kondziella,et al.  Flexibility requirements of renewable energy based electricity systems – a review of research results and methodologies , 2016 .

[19]  Geert Deconinck,et al.  Demand response flexibility and flexibility potential of residential smart appliances: Experiences from large pilot test in Belgium , 2015 .

[20]  Lieve Helsen,et al.  Quantification of flexibility in buildings by cost curves – Methodology and application , 2016 .

[21]  Peter Tzscheutschler,et al.  Prosumer Integration in Flexibility Markets: A Bid Development and Pricing Model , 2018, 2018 2nd IEEE Conference on Energy Internet and Energy System Integration (EI2).

[22]  B. Stram.  Key challenges to expanding renewable energy , 2016 .

[23]  S. K. Soonee,et al.  Flexibility in 21st Century Power Systems , 2014 .

[24]  Dirk Saelens,et al.  Generic characterization method for energy flexibility: Applied to structural thermal storage in residential buildings , 2017 .

[25]  Luis F. Ochoa,et al.  Evaluating and planning flexibility in sustainable power systems , 2013, 2013 IEEE Power & Energy Society General Meeting.

[26]  M. Kurrat,et al.  Virtual power plants with combined heat and power micro-units , 2005, 2005 International Conference on Future Power Systems.

[27]  Pierluigi Siano,et al.  Flexibility in future power systems with high renewable penetration: A review , 2016 .

[28]  Kalpana Chauhan,et al.  Optimization of grid energy using demand and source side management for DC microgrid , 2017 .

[29]  Dirk Saelens,et al.  Energy flexible buildings: an evaluation of definitions and quantification methodologies applied to thermal storage , 2018 .