Effect of pollutants on biogas steam reforming

Abstract This study reports the influence of biogas poisoning on a Ni based catalyst working under steam reforming conditions (atmospheric pressure, T = 1073 K and H 2 O/CH 4  = 2 mol/mol). A biogas stream composed by CH 4 and CO 2 with a ratio 55/45 vol.%, added with different chemical species (H 2 S, hydrocarbons mixture and D5) as contaminants, was used as inlet gas stream. First, effect of poisoning on Ni catalyst were separately evaluated and the boundary concentrations for each contaminants were revealed (0.4 ppm, 200 ppm and 0.5 ppm for H 2 S, hydrocarbons and D5 respectively) to assure Ni stable performances on time on stream (100 h at 50,000 h −1 of GHSV). Successively, a comparison between Ni catalytic behaviors in presence of two combined poisoning in the biogas (H 2 S + Hydrocarbons and Hydrocarbons + D5) was carried out. It was found that the effect of combined poisoning, even though it considered in moderate concentration, is harmful for Ni catalyst activity. Methane conversion on time on stream was reduced from 86% to 40% after 50 h, when the couple of poisoning Hydrocarbons + D5 was added to the inlet gas stream, while a lower deactivation pattern (about 73%) was leaded by couple H 2 S + Hydrocarbons. Both poisoning mixtures promoted coke deposition on Ni catalyst surface (about ≥0.5 mgC/g cat ·h) independently by poisoning chemical characteristics probably due to adsorption/deposition of contaminants on catalytic sites.

[1]  Takafumi Yoshida,et al.  Optimising H2 production from model biogas via combined steam reforming and CO shift reactions , 2005 .

[2]  S. Goto,et al.  Suppression of carbonaceous depositions on nickel catalyst for the carbon dioxide reforming of methane , 1999 .

[3]  J. Rostrup-Nielsen.  Coking on nickel catalysts for steam reforming of hydrocarbons , 1974 .

[4]  J. Arraibi,et al.  Ni and RhNi catalysts supported on Zeolites L for hydrogen and syngas production by biogas reforming processes , 2014 .

[5]  Wei Zhou,et al.  Biogas reforming for hydrogen production over a Ni–Co bimetallic catalyst: Effect of operating conditions , 2010 .

[6]  Andrea Lanzini,et al.  Biogas reforming process investigation for SOFC application , 2015 .

[7]  Antonio Galvagno,et al.  Analysis of biogas reforming process for molten carbonate fuel cells , 2012 .

[8]  J. Nørskov,et al.  Methane activation on Ni(111) : Effects of poisons and step defects , 2005 .

[9]  J. Requies,et al.  Biogas steam and oxidative reforming processes for synthesis gas and hydrogen production in conventional and microreactor reaction systems , 2012 .

[10]  Franco Biasioli,et al.  Monitoring of volatile compound emissions during dry anaerobic digestion of the Organic Fraction of Municipal Solid Waste by Proton Transfer Reaction Time-of-Flight Mass Spectrometry. , 2012, Bioresource technology.

[11]  Chunshan Song,et al.  Sulfur poisoning of CeO2–Al2O3-supported mono- and bi-metallic Ni and Rh catalysts in steam reforming of liquid hydrocarbons at low and high temperatures , 2010 .

[12]  Calvin H. Bartholomew,et al.  Sulfur poisoning of nickel methanation catalysts: I. in situ deactivation by H2S of nickel and nickel bimetallics☆ , 1979 .

[13]  Arun S.K. Raju,et al.  Steam-biogas reforming over a metal-foam-coated (Pd–Rh)/(CeZrO2–Al2O3) catalyst compared with pellet type alumina-supported Ru and Ni catalysts , 2015 .

[14]  Vinod M. Janardhanan,et al.  A detailed kinetic model for biogas steam reforming on Ni and catalyst deactivation due to sulfur poisoning , 2014 .

[15]  K. Sasaki,et al.  Chemical Degradation of SOFCs: External Impurity Poisoning and Internal Diffusion-Related Phenomena , 2013 .

[16]  Kohei Ito,et al.  Chlorine Poisoning of SOFC Ni-Cermet Anodes , 2008 .

[17]  Andrea Lanzini,et al.  Solid oxide fuel cell anode degradation by the effect of siloxanes , 2015 .

[18]  Kazunari Sasaki,et al.  Poisoning of SOFC anodes by various fuel impurities , 2008 .

[19]  J. Oudar.  Sulfur Adsorption and Poisoning of Metallic Catalysts , 1980 .

[20]  Dennis Y.C. Leung,et al.  A review of biomass-derived fuel processors for fuel cell systems , 2009 .

[21]  M. Koyama,et al.  Chemical durability of Solid Oxide Fuel Cells: Influence of impurities on long-term performance , 2011 .

[22]  Takafumi Yoshida,et al.  Steam reforming of a clean model biogas over Ni/Al2O3 in fluidized- and fixed-bed reactors , 2002 .

[23]  H. Hofbauer,et al.  Experimental Study of Model Biogas Catalytic Steam Reforming: 2. Impact of Sulfur on the Deactivation and Regeneration of Ni-Based Catalysts , 2008 .

[24]  E. J. Erekson,et al.  Sulfur poisoning of nickel methanation catalysts: II. Effects of H2S concentration, CO and H2O partial pressures and temperature on reactivation rates , 1983 .

[25]  Kunghyuk Lee,et al.  Biogas reforming by the honeycomb reactor for hydrogen production , 2016 .

[26]  V. V. Chesnokov,et al.  New data on gas-phase radical reactions in the steam reforming of methane in the presence of catalysts: I. Nickel catalysts , 2000 .

[27]  Jens R. Rostrup-Nielsen,et al.  Syngas in perspective , 2002 .