Free-standing graphene-based porous carbon films with three-dimensional hierarchical architecture for advanced flexible Li–sulfur batteries

Sulfur shows a large lithium-storage capacity and this make it an attractive cathode candidate for next-generation flexible lithium-ion batteries. However, the insulating nature of sulfur and the dissolution of intermediate polysulfides limit the rate performances and cycle life of Li–sulfur batteries. Here, we report a class of free-standing cathode films consisting of hierarchically porous carbon-encapsulated sulfur have high rate capability (a reversible capacity of 1017 mA h g−1, 865 mA h g−1, and 726 mA h g−1 at 0.2 C, 0.5 C and 1 C, respectively) as well as excellent cycle stability (approximate 10.5% capacity loss after 300 cycles). In addition, the free-standing cathode films have good mechanical flexibility, and thus show remarkable lithium-storage performances at the bent state. The results indicate that such free-standing cathode films with 3D hierarchical structure will provide new opportunities for Li–sulfur batteries for applications in flexible electronic devices.

[1]  Shaogang Wang,et al.  A Graphene–Pure‐Sulfur Sandwich Structure for Ultrafast, Long‐Life Lithium–Sulfur Batteries , 2014, Advanced materials.

[2]  Chunsheng Wang,et al.  In situ formed lithium sulfide/microporous carbon cathodes for lithium-ion batteries. , 2013, ACS nano.

[3]  Jinghua Guo,et al.  High-rate, ultralong cycle-life lithium/sulfur batteries enabled by nitrogen-doped graphene. , 2014, Nano letters.

[4]  Weihan Li,et al.  Free-standing porous carbon nanofibers-sulfur composite for flexible Li-S battery cathode. , 2014, Nanoscale.

[5]  Jie Liu,et al.  Significantly improved long-cycle stability in high-rate Li-S batteries enabled by coaxial graphene wrapping over sulfur-coated carbon nanofibers. , 2013, Nano letters.

[6]  A. Manthiram,et al.  Challenges and prospects of lithium-sulfur batteries. , 2013, Accounts of chemical research.

[7]  X. Lou,et al.  Confining sulfur in double-shelled hollow carbon spheres for lithium-sulfur batteries. , 2012, Angewandte Chemie.

[8]  K. Müllen,et al.  Fabrication of graphene-encapsulated oxide nanoparticles: towards high-performance anode materials for lithium storage. , 2010, Angewandte Chemie.

[9]  Guangyuan Zheng,et al.  Understanding the role of different conductive polymers in improving the nanostructured sulfur cathode performance. , 2013, Nano letters.

[10]  Jiaqi Huang,et al.  Graphene/single-walled carbon nanotube hybrids: one-step catalytic growth and applications for high-rate Li-S batteries. , 2012, ACS nano.

[11]  Xufeng Zhou,et al.  Sulfur/Carbon Nanotube Composite Film as a Flexible Cathode for Lithium–Sulfur Batteries , 2013 .

[12]  M. El‐Kady,et al.  Laser Scribing of High-Performance and Flexible Graphene-Based Electrochemical Capacitors , 2012, Science.

[13]  Jung Tae Lee,et al.  Sulfur‐Infiltrated Micro‐ and Mesoporous Silicon Carbide‐Derived Carbon Cathode for High‐Performance Lithium Sulfur Batteries , 2013, Advanced materials.

[14]  John B Goodenough,et al.  The Li-ion rechargeable battery: a perspective. , 2013, Journal of the American Chemical Society.

[15]  Lin Gu,et al.  Smaller sulfur molecules promise better lithium-sulfur batteries. , 2012, Journal of the American Chemical Society.

[16]  L. Nazar,et al.  A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries. , 2009, Nature materials.

[17]  X. Lou,et al.  Enhancing lithium–sulphur battery performance by strongly binding the discharge products on amino-functionalized reduced graphene oxide , 2014, Nature Communications.

[18]  John R. Miller,et al.  Electrochemical Capacitors for Energy Management , 2008, Science.

[19]  Li Li,et al.  Graphene-based three-dimensional hierarchical sandwich-type architecture for high-performance Li/S batteries. , 2013, Nano letters.

[20]  Xiaogang Zhang,et al.  Encapsulating sulfur into hierarchically ordered porous carbon as a high-performance cathode for lithium-sulfur batteries. , 2013, Chemistry.

[21]  Zhiqian Wang,et al.  Fabrication of High‐Performance Flexible Alkaline Batteries by Implementing Multiwalled Carbon Nanotubes and Copolymer Separator , 2014, Advanced materials.

[22]  Shengbo Zhang,et al.  Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions , 2013 .

[23]  Hong‐Jie Peng,et al.  Nanoarchitectured Graphene/CNT@Porous Carbon with Extraordinary Electrical Conductivity and Interconnected Micro/Mesopores for Lithium‐Sulfur Batteries , 2014 .

[24]  Kefei Li,et al.  3D Hyperbranched Hollow Carbon Nanorod Architectures for High‐Performance Lithium‐Sulfur Batteries , 2014 .

[25]  Lixia Yuan,et al.  Insight into the Electrode Mechanism in Lithium‐Sulfur Batteries with Ordered Microporous Carbon Confined Sulfur as the Cathode , 2013 .

[26]  Jun Zhang,et al.  Sulfur nanocrystals anchored graphene composite with highly improved electrochemical performance for lithium-sulfur batteries , 2014 .

[27]  Guangyuan Zheng,et al.  Hollow carbon nanofiber-encapsulated sulfur cathodes for high specific capacity rechargeable lithium batteries. , 2011, Nano letters.

[28]  C. F. Ng,et al.  A V2O5/Conductive‐Polymer Core/Shell Nanobelt Array on Three‐Dimensional Graphite Foam: A High‐Rate, Ultrastable, and Freestanding Cathode for Lithium‐Ion Batteries , 2014, Advanced materials.

[29]  Lin Gu,et al.  Direct atomic-scale confirmation of three-phase storage mechanism in Li4Ti5O12 anodes for room-temperature sodium-ion batteries , 2013, Nature Communications.

[30]  Sang-Young Lee,et al.  Progress in flexible energy storage and conversion systems, with a focus on cable-type lithium-ion batteries , 2013 .

[31]  H. Dai,et al.  Graphene-wrapped sulfur particles as a rechargeable lithium-sulfur battery cathode material with high capacity and cycling stability. , 2011, Nano letters.

[32]  Andreas Winter,et al.  Three‐Dimensional Nitrogen and Boron Co‐doped Graphene for High‐Performance All‐Solid‐State Supercapacitors , 2012, Advanced materials.

[33]  B. Liu,et al.  Flexible Energy‐Storage Devices: Design Consideration and Recent Progress , 2014, Advanced materials.

[34]  Quan-hong Yang,et al.  Reduction of Graphene Oxide by Hydrogen Sulfide: A Promising Strategy for Pollutant Control and as an Electrode for Li‐S Batteries , 2014 .

[35]  SUPARNA DUTTASINHA,et al.  Graphene: Status and Prospects , 2009, Science.

[36]  Jiulin Wang,et al.  Sulfur‐Based Composite Cathode Materials for High‐Energy Rechargeable Lithium Batteries , 2015, Advanced materials.

[37]  S. Stankovich,et al.  Preparation and characterization of graphene oxide paper , 2007, Nature.

[38]  Xingyi Huang,et al.  Graphene oxide-encapsulated carbon nanotube hybrids for high dielectric performance nanocomposites with enhanced energy storage density. , 2013, Nanoscale.

[39]  Zhiwei Zhang,et al.  3D Interconnected Porous Carbon Aerogels as Sulfur Immobilizers for Sulfur Impregnation for Lithium‐Sulfur Batteries with High Rate Capability and Cycling Stability , 2014 .

[40]  Doron Aurbach,et al.  Sulfur‐Impregnated Activated Carbon Fiber Cloth as a Binder‐Free Cathode for Rechargeable Li‐S Batteries , 2011, Advanced materials.

[41]  H. Byon,et al.  In Situ Synthesis of Bipyramidal Sulfur with 3D Carbon Nanotube Framework for Lithium–Sulfur Batteries , 2014 .

[42]  Weidong Zhou,et al.  Amylopectin wrapped graphene oxide/sulfur for improved cyclability of lithium-sulfur battery. , 2013, ACS nano.

[43]  Guang He,et al.  Tailoring porosity in carbon nanospheres for lithium-sulfur battery cathodes. , 2013, ACS nano.

[44]  Hui-Ming Cheng,et al.  Direct reduction of graphene oxide films into highly conductive and flexible graphene films by hydrohalic acids , 2010 .

[45]  X. Lou,et al.  Amorphous CoSnO3@C nanoboxes with superior lithium storage capability , 2013 .

[46]  Fan Zhang,et al.  Sulfur-infiltrated graphene-based layered porous carbon cathodes for high-performance lithium-sulfur batteries. , 2014, ACS nano.

[47]  Shuru Chen,et al.  Flexible freestanding sandwich-structured sulfur cathode with superior performance for lithium–sulfur batteries , 2014 .

[48]  Xingyi Huang,et al.  Mechanically Flexible and Multifunctional Polymer‐Based Graphene Foams for Elastic Conductors and Oil‐Water Separators , 2013, Advanced materials.

[49]  Niyaz Mohammad Mahmoodi,et al.  Modification of carbon nanotubes with cationic surfactant and its application for removal of direct dyes , 2014 .

[50]  Feng Li,et al.  A microporous-mesoporous carbon with graphitic structure for a high-rate stable sulfur cathode in carbonate solvent-based Li-S batteries. , 2012, Physical chemistry chemical physics : PCCP.

[51]  Guangmin Zhou,et al.  Fibrous hybrid of graphene and sulfur nanocrystals for high-performance lithium-sulfur batteries. , 2013, ACS nano.

[52]  Min-Kyu Song,et al.  A long-life, high-rate lithium/sulfur cell: a multifaceted approach to enhancing cell performance. , 2013, Nano letters.