The GPS software receiver based on the SDR(Software Defined Radio) technology provides the ability to easily adopt other signal processing algorithms without changing or modifying the hardware of the GPS receiver. However, it is difficult to implement the GPS software receiver using a commercial processor because of heavy computation load for processing the GPS signals in real time. This paper proposes an efficient GPS signal processing scheme and correlator structure to reduce the computation load for processing the GPS signal in the GPS software receiver, which uses a patterned look-up table method to generate the correlation value between the GPS signals and the replica signals. In this paper, it is explained that the computation load of the proposed scheme is much smaller than that of the previous GPS signal processing scheme. Finally, the processing time of the proposed scheme is compared with that of the previous scheme, and the improvement is shown from the viewpoint of the computation load.
[1]
Joseph Mitola,et al.
Software Radio Architecture: Object-Oriented Approaches to Wireless Systems Engineering
,
2000
.
[2]
Steven P. Powell,et al.
A 12-Channel Real-Time GPS L1 Software Receiver1
,
2003
.
[3]
Jang Gyu Lee,et al.
Multipath detection in carrier phase differential GPS
,
2005
.
[4]
Per Enge,et al.
Real-Time GPS Software Radio Receiver
,
2001
.
[5]
Elliott D. Kaplan.
Understanding GPS : principles and applications
,
1996
.
[6]
Pisit Phokharatkul,et al.
Invariant Range Image Multi-Pose Face Recognition Using Fuzzy c-Means
,
2005
.