Stable fluorinated sulfonated poly(arylene ether) membranes for vanadium redox flow batteries

Partially fluorinated sulfonated poly(arylene ether) (SFPAE) copolymers were investigated as chemically stable proton exchange membranes for application in vanadium redox flow batteries (VRFB). The membranes' proton conductivity and vanadium ion permeability were quantified and correlated to other membrane properties such as water uptake and tensile modulus to provide insight into the tradeoffs in the design of new membranes for flow battery applications. The SFPAE-1.8 sample with optimized proton conductivity to vanadium permeability selectivity was selected for evaluation in a VRFB device and compared to the performance of a cell with a NAFION® N212 membrane. The VRFB cell with a SFPAE-1.8 membrane had higher coulombic efficiency, voltage efficiency, and energy efficiency compared to a VRFB with a N212 membrane under all tested current densities. The capacity fade of a VRFB with the SFPAE-1.8 membrane was 1.1 mA h per cycle, which was about 7 times lower than the fade experienced for a VRFB with a N212 membrane. The performance characteristics of the device could be correlated directly to the membrane properties and this work demonstrates our progress towards high-performance, low-cost, long-lifetime ion exchange membranes for electrochemical energy storage devices.

[1]  Yanxiang Li,et al.  Viscometric behavior of disulfonated poly(arylene ether sulfone) random copolymers used as proton exchange membranes , 2008 .

[2]  Zhenguo Yang,et al.  Membrane development for vanadium redox flow batteries. , 2011, ChemSusChem.

[3]  Jun Liu,et al.  Chemical and mechanical degradation of sulfonated poly(sulfone) membranes in vanadium redox flow batteries , 2011 .

[4]  Xinping Qiu,et al.  Nafion/SiO2 hybrid membrane for vanadium redox flow battery , 2007 .

[5]  K. Kreuer.  On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells , 2001 .

[6]  Timothy J. Peckham,et al.  Structure‐Morphology‐Property Relationships of Non‐Perfluorinated Proton‐Conducting Membranes , 2010, Advanced materials.

[7]  Jianguo Liu,et al.  A multilayered membrane for vanadium redox flow battery , 2012 .

[8]  J. Kerres,et al.  Partially fluorinated poly(arylene ether)s: Investigation of the dependence of monomeric structures on polymerisability and degradation during sulfonation , 2010 .

[9]  Bruce E. Logan,et al.  Investigation of ionic polymer cathode binders for microbial fuel cells , 2010 .

[10]  Xianfeng Li,et al.  Nanofiltration (NF) membranes: the next generation separators for all vanadium redox flow batteries (VRBs)? , 2011 .

[11]  R. Lichtenthaler,et al.  Transport properties of vanadium ions in cation exchange membranes:: Determination of diffusion coefficients using a dialysis cell , 1998 .

[12]  M. Mench,et al.  Redox flow batteries: a review , 2011 .

[13]  Xinping Qiu,et al.  Nafion/organically modified silicate hybrids membrane for vanadium redox flow battery , 2009 .

[14]  B. Tian,et al.  Proton conducting composite membrane from Daramic/Nafion for vanadium redox flow battery , 2004 .

[15]  B. Pivovar,et al.  Pervaporation membranes in direct methanol fuel cells , 1999 .

[16]  Y. Lee,et al.  Surface-fluorinated proton-exchange membrane with high electrochemical durability for direct methanol fuel cells. , 2009, ACS applied materials & interfaces.

[17]  Min Xiao,et al.  Preparation and properties of sulfonated poly(fluorenyl ether ketone) membrane for vanadium redox flow battery application , 2010 .

[18]  Huamin Zhang,et al.  Ion exchange membranes for vanadium redox flow battery (VRB) applications , 2011 .

[19]  Hiroyuki Uchida,et al.  Proton-conductive aromatic ionomers containing highly sulfonated blocks for high-temperature-operable fuel cells. , 2010, Angewandte Chemie.

[20]  Zhenguo Yang,et al.  Cycling performance and efficiency of sulfonated poly(sulfone) membranes in vanadium redox flow batteries , 2010 .

[21]  Yanxiang Li,et al.  Synthesis and characterization of controlled molecular weight disulfonated poly(arylene ether sulfone) copolymers and their applications to proton exchange membranes , 2006 .

[22]  B. Pivovar,et al.  The Chemical and Structural Nature of Proton Exchange Membrane Fuel Cell Properties , 2005 .

[23]  M. Hickner,et al.  Alternative polymer systems for proton exchange membranes (PEMs). , 2004, Chemical reviews.

[24]  Jinwei Chen,et al.  Studies on polypyrrole modified nafion membrane for vanadium redox flow battery , 2008 .

[25]  H. Na,et al.  Synthesis and characterization of poly(arylene ether ketone)s bearing pendant sulfonic acid groups for proton exchange membrane materials , 2010 .

[26]  Y. Elabd,et al.  Block Copolymers for Fuel Cells , 2011 .

[27]  Xigao Jian,et al.  Effect of amination agent on the properties of quaternized poly(phthalazinone ether sulfone) anion exchange membrane for vanadium redox flow battery application , 2010 .

[28]  Chenxi Sun,et al.  Preparation and characterization of Nafion/SPEEK layered composite membrane and its application in vanadium redox flow battery , 2008 .

[29]  M. Guiver,et al.  A new class of highly-conducting polymer electrolyte membranes: Aromatic ABA triblock copolymers , 2012 .

[30]  M. Xiao,et al.  Novel polyaromatic ionomers with large hydrophilic domain and long hydrophobic chain targeting at highly proton conductive and stable membranes , 2011 .