Power enhancement of piezoelectric transformers by adding heat transfer equipment

It is known that piezoelectric transformers have several inherent advantages compared with conventional electromagnetic transformers. However, the maximum power capacity of piezoelectric transformers is not as large as electromagnetic transformers in practice, especially in the case of high output current. The theoretical power density of piezoelectric transformers calculated by stress boundary can reach 330 W/cm3, but no piezoelectric transformer has ever reached such a high power density in practice. The power density of piezoelectric transformers is limited to 33 W/cm3 in practical applications. The underlying reason is that the maximum passing current of the piezoelectric material (mechanical current) is limited by the temperature rise caused by heat generation. To increase this current and the power capacity, we proposed to add a thermal pad to the piezoelectric transformer to dissipate heat. The experimental results showed that the proposed techniques can increase by 3 times the output current of the piezoelectric transformer. A theoretical-phenomenological model which explains the relationship between vibration velocity and generated heat is also established to verify the experimental results.

[1]  Junhui Hu Analyses of the temperature field in a bar-shaped piezoelectric transformer operating in longitudinal vibration mode , 2003, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[2]  Chih-Kung Lee,et al.  Thermo-Piezoelectric Finite Element Modeling for Piezoelectric Transformers , 2008 .

[3]  Yuan-Ping Liu,et al.  Analyses of the Heat Dissipated by Losses in a Piezoelectric Transformer , 2009, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[4]  Shinjiro Tashiro,et al.  Influence of Temperature Rise and Vibration Level on Electromechanical Properties of High-Power Piezoelectric Ceramics , 1997 .

[5]  Hyun-Kyo Jung,et al.  Analysis of temperature rise for piezoelectric transformer using finite-element method , 2006, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[6]  Manabu Aoyagi,et al.  High power characteristics at antiresonance frequency of piezoelectric transducers , 1996 .

[7]  Kenji Uchino,et al.  High Power Characterization of Piezoelectric Materials , 1998 .

[8]  Zhihua Feng,et al.  Radiator heightens power density of piezoelectric transformers , 2010 .

[9]  D. Guyomar,et al.  Characterization of the mechanical nonlinear behavior of piezoelectric ceramics , 2000, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[10]  M. Lethiecq,et al.  Calculation of dissipation resistances in a single-element transducer , 2007, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[11]  Vo Viet Thang,et al.  Piezotransformer with ring-dot-shape for easy heat radiation and high efficiency power , 2011, 2011 International Symposium on Applications of Ferroelectrics (ISAF/PFM) and 2011 International Symposium on Piezoresponse Force Microscopy and Nanoscale Phenomena in Polar Materials.

[12]  Francois Costa,et al.  Design of fixed frequency controlled radial-mode stacked disk-type piezoelectric transformers for DC/DC converter applications , 2009 .

[13]  Jiashi Yang,et al.  Piezoelectric transformer structural modeling - a review , 2007, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[14]  Seth R. Sanders,et al.  Fundamental limits on energy transfer and circuit considerations for piezoelectric transformers , 1998 .

[15]  Zhi Hua Feng,et al.  Power density of piezoelectric transformers improved using a contact heat transfer structure , 2012, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[16]  K. Uchino,et al.  Loss mechanisms in piezoelectrics: how to measure different losses separately , 2001, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.