Bonded Rare Earth Permanent Magnets

[1]  N. Tezuka,et al.  Effect of hydrogenation disproportionation conditions on magnetic anisotropy in Nd-Fe-B powder prepared by dynamic hydrogenation disproportionation desorption recombination , 2017 .

[2]  K. Takagi,et al.  Improvement of magnetization of submicron-sized high coercivity Sm2Fe17N3 powder by using hydrothermally synthesized sintering-tolerant cubic hematite , 2017 .

[3]  Masao Yano,et al.  (Sm,Zr)(Fe,Co)11.0-11.5Ti1.0-0.5 compounds as new permanent magnet materials , 2016 .

[4]  K. Takagi,et al.  Microstructural behavior on particle surfaces and interfaces in Sm2Fe17N3 powder compacts during low-temperature sintering , 2012 .

[5]  T. Iriyama,et al.  Magnetic Properties of TbCu7-Type Sm-Fe-N Melt-Spun Ribbons , 2004 .

[6]  T. Iriyama,et al.  Investigation of Magnetic Anisotropy for α-Fe/Nd2Fe14B Composition Alloy as Exchange-Spring Magnets Prepared Using Hot-Upsetting Technique , 2004 .

[7]  K. Ohmori,et al.  Sm/sub 2/Fe/sub 17/N/sub 3/ magnet powder made by using reduction and diffusion method , 1999, IEEE International Magnetics Conference.

[8]  T. Hirai,et al.  Structural and magnetic properties of rapidly quenched (R,Zr)(Fe,Co)10Nx (R=Nd,Sm) , 1996 .

[9]  T. Takeshita,et al.  NdFeB anisotropic magnet powders produced by the HDDR process , 1993 .

[10]  Joachim Wecker,et al.  Structural and hard magnetic properties of rapidly solidified Sm-Fe-N , 1991 .

[11]  E. Kneller,et al.  The exchange-spring magnet: a new material principle for permanent magnets , 1991 .

[12]  C. D. Waard,et al.  Meltspun permanent magnet materials containing Fe3B as the main phase , 1989 .