A computational multi-field mechanics model of composite micromechanical systems (MEMS) with piezoelectric actuation and sensing has been developed as a design tool for micro-resonators. These devices are to be used for filters and other signal processing applications. The developed dynamic model of MEMS resonators accounts for structural properties and the electromechanical coupling effect through finite element analysis. It is assumed that the deflection is large and that the geometric nonlinearity must be included. The mechanical strain is assumed to be small so that the linear constitutive relations are valid. The dynamic admittance model is derived by combining the linear piezoelectric constitutive equations with the modal transfer function of the micro-resonator structure. The resonator receptance matrix is constructed through modal summation by considering only a limited number of dominant modes. The electromechanical coupling determination at the input and output ports makes use of the converse and direct piezoelectric effects. In the development of the finite-element models, boundary conditions, electrodes shaping, and factors such as varying elastic modulus across the length of the beam for the multilayered structure are taken into account. The coupled model can be used to carry out sensitivity studies with respect to the following: i) resonator thickness and length; ii) influence of constant axial forces on the transverse vibrations of clamped-clamped micro-resonators; geometry of the drive and sense electrodes; and iii) imperfect boundary conditions due to mask imperfections and fabrication procedure. The developed model has been validated by comparing the predictions with results available in the literature for clamped-clamped resonators.
[1]
B. Balachandran,et al.
Buckling and free oscillations of composite microresonators
,
2006,
Journal of Microelectromechanical Systems.
[2]
B. Balachandran,et al.
Oscillations of Piezoelectric Micro-Scale Resonators
,
2004
.
[3]
Yong-Hwa Park,et al.
High-fidelity modeling of MEMS resonators. Part II. Coupled beam-substrate dynamics and validation
,
2004,
Journal of Microelectromechanical Systems.
[4]
Yong-Hwa Park,et al.
High-fidelity modeling of MEMS resonators. Part I. Anchor loss mechanisms through substrate
,
2004,
Journal of Microelectromechanical Systems.
[5]
R. Jay Conant,et al.
Advanced Mechanics of Materials
,
2003
.
[6]
Don L. DeVoe,et al.
Piezoelectric thin film micromechanical beam resonators
,
2001
.
[7]
L. Meirovitch.
Principles and techniques of vibrations
,
1996
.
[8]
R. Howe,et al.
Microelectromechanical filters for signal processing
,
1992,
[1992] Proceedings IEEE Micro Electro Mechanical Systems.
[9]
J. A. Stricklin,et al.
Geometrically nonlinear structural analysis by direct stiffness method
,
1971
.
[10]
B. Balachandran,et al.
NONLINEAR PHENOMENA IN MICROELECTROMECHANICAL RESONATORS
,
2005
.
[11]
Jalil Rahimzadeh-Hanachi,et al.
Nonlinear elastic frame analysis by finite element
,
1981
.