Input-Shaping and Model-Following Control of a Helicopter Carrying a Suspended Load

When a heavy load is suspended from a helicopter, excessive load swing degrades helicopter control and can result in obstacle collisions. This work examines the benefits of combining input-shaping and model-following control to improve performance when carrying a suspended load. Model-following control architectures are used in modern helicopter flight control systems to make the helicopter respond like a prescribed model. On its own, model-following control is ineffective when carrying a suspended load because excessive load swing degrades tracking of the prescribed model dynamics and thus control of the helicopter. Therefore, reducing load swing improves tracking of the prescribed model and increases safety and productivity. Input shaping is a control technique that has been used to control vibration of flexible machines, such as robots, satellites, and cranes. By combining input shaping with model-following control, helicopter payload swing is reduced and tracking of the prescribed model is improved. T...

[1]  Tarunraj Singh,et al.  Robust time-optimal control - Frequency domain approach , 1994 .

[2]  George Vukovich,et al.  Nonlinear Input Shaping Control of Flexible Spacecraft Reorientation Maneuver , 1998 .

[3]  Otto J. M. Smith,et al.  Feedback control systems , 1958 .

[4]  Warren P. Seering,et al.  FUEL-EFFICIENT PULSE COMMAND PROFILES FOR FLEXIBLE SPACECRAFT , 1996 .

[5]  Warren P. Seering,et al.  Preshaping Command Inputs to Reduce System Vibration , 1990 .

[6]  William Singhose,et al.  Human Operator Performance Testing Using an Input-Shaped Bridge Crane , 2006 .

[7]  Tarunraj Singh,et al.  Input-shaped control of three-dimensional maneuvers of flexible spacecraft , 1993 .

[8]  Jinjun Shan,et al.  Vibration Control Using Input Shaping and Adaptive Positive Position Feedback , 2011 .

[9]  William Singhose,et al.  Improving repeatability of coordinate measuring machines with shaped command signals , 1996 .

[10]  A. Galip Ulsoy,et al.  An Approach to Control Input Shaping With Application to Coordinate Measuring Machines , 1999 .

[11]  S. Osder,et al.  Design and robustness issues for highly augmented helicopter controls , 1992 .

[12]  Warren P. Seering,et al.  Experimental Verification of Vibration Reduction in Flexible Spacecraft Using Input Shaping , 1997 .

[13]  William Singhose,et al.  A controller enabling precise positioning and sway reduction in bridge and gantry cranes , 2007 .

[14]  Jeff K. Pieper,et al.  Model-following control of a helicopter in hover , 1996, Proceeding of the 1996 IEEE International Conference on Control Applications IEEE International Conference on Control Applications held together with IEEE International Symposium on Intelligent Contro.

[15]  Frank L. Lewis,et al.  Modern Design Techniques , 2015 .

[16]  H. C. Curtiss,et al.  An analytic modeling and system identification study of rotor/fuselage dynamics at Hover , 1994 .

[17]  K. Narendra,et al.  Design of helicopter stabilization systems using optimal control theory. , 1969 .

[18]  William Singhose,et al.  Comparison of robust input shapers , 2008 .

[19]  Theodor A. Dukes.  Maneuvering Heavy Sling Loads Near Hover Part II: Some Elementary Maneuvers , 1973 .

[20]  William Singhose,et al.  Command Shaping in Tracking Control of a Two-Link Flexible Robot , 1998 .

[21]  David Wang,et al.  Verification of a closed-loop shaped-input controller for a five-bar-linkage manipulator , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[22]  Mark B. Tischler,et al.  System Identification Requirements for High-Bandwidth Rotorcraft Flight Control System Design , 1990, 1991 American Control Conference.

[23]  Raymond W. Prouty,et al.  Helicopter performance, stability, and control , 1986 .

[24]  L. D. Morrow,et al.  Real model following control , 1975 .

[25]  Franco Bernelli-Zazzera,et al.  Experiments on Command Shaping Control of a Manipulator with Flexible Links , 2002 .

[26]  William Singhose,et al.  Performance studies of human operators driving double-pendulum bridge cranes , 2010 .

[27]  Eric N. Johnson,et al.  Precision Slung Cargo Delivery onto a Moving Platform , 2010 .

[28]  Theodor A. Dukes.  Maneuvering Heavy Sling Loads Near Hover Part I: Damping the Pendulous Motion , 1973 .

[29]  C. Adams,et al.  Modeling and input shaping control of a micro coaxial radio-controlled helicopter carrying a suspended load , 2012, 2012 12th International Conference on Control, Automation and Systems.

[30]  Qiang Liu,et al.  Robust time-optimal control of uncertain structural dynamic systems , 1993 .

[31]  A. E. Bryson,et al.  The inclusion of rotor dynamics in controller design for helicopters. , 1972 .

[32]  William E. Singhose,et al.  Reducing swing of model helicopter sling load using input shaping , 2011, 2011 9th IEEE International Conference on Control and Automation (ICCA).

[33]  Peter G. Hamel,et al.  Advances in rotorcraft system identification , 1997 .

[34]  Morten Bisgaard,et al.  Adaptive control system for autonomous helicopter slung load operations , 2010 .

[35]  J H Smith,et al.  Design, Fabrication, and Flight Test of the Active Arm External Load Stabilization System for Cargo Handling Helicopters , 1973 .

[36]  Arthur E. Bryson,et al.  Near-hover control of a helicopter with a hanging load , 1976 .

[37]  William Singhose,et al.  EXTRA-INSENSITIVE INPUT SHAPERS FOR CONTROLLING FLEXIBLE SPACECRAFT , 1996 .