Increased work pace is unprofitable: a beef-cutting case study.

The beef industry worldwide is showing a trend towards increased cutting pace aimed at higher profits. However, prior research in the duck meat industry suggested that a higher cutting pace reduced quality and yield, leading to losses. This study aimed to test this hypothesis by investigating the effects of varying beef-cutting paces on yield, quality and economy. A field experiment was conducted on six workers cutting beef fillet, sirloin and entrecôte. Three types of paces were sequentially tested: Baseline (i.e., status quo), 'Quantity focus' (i.e., pace required to maximise quantity) and 'Quality focus' (i.e., pace required to minimise errors). The results showed a significant drop in yield, increased rate of quality deficiency and economic losses with the change to 'Quantity focus' (from Baseline and 'Quality focus') for all meat types. Workers supported these results and also added health problems to the list. The results confirmed that an increased cutting pace is unprofitable.

[1]  S. Nossent,et al.  Working conditions in the European meat processing industry , 1995 .

[2]  L. Claudon,et al.  Effect of knife sharpness on upper limb biomechanical stresses—a laboratory study , 2006 .

[3]  Jan Dul,et al.  Ergonomics Contributions to Company Strategies , 2008, Applied ergonomics.

[4]  Svend Erik Mathiassen,et al.  Upper arm postures and movements in female hairdressers across four full working days. , 2010, The Annals of occupational hygiene.

[5]  Robert Sessions Woodworth,et al.  THE ACCURACY OF VOLUNTARY MOVEMENT , 1899 .

[6]  Ann-Christine Falck,et al.  The impact of poor assembly ergonomics on product quality: A cost-benefit analysis in car manufacturing: Poor Assembly Ergonomics and Product Quality , 2010 .

[7]  J. G. Hollands,et al.  Engineering Psychology and Human Performance , 1984 .

[8]  Shai Barbut.  Review: Automation and meat quality-global challenges. , 2014, Meat science.

[9]  J. Thompson,et al.  Meat standards and grading: a world view. , 2010, Meat science.

[10]  Paul H.P. Yeow,et al.  Quality, productivity, occupational health and safety and cost effectiveness of ergonomic improvements in the test workstations of an electronic factory , 2003 .

[11]  Pascal Madeleine,et al.  Physical workload during manual and mechanical deboning of poultry , 2002 .

[12]  Patrick G Dempsey,et al.  Cutting moments and grip forces in meat cutting operations and the effect of knife sharpness. , 2003, Applied ergonomics.

[13]  Jean-François Hocquette,et al.  Prospects for the European beef sector over the next 30 years , 2011 .

[14]  Steven D. Levitt,et al.  Was There Really a Hawthorne Effect at the Hawthorne Plant? An Analysis of the Original Illumination Experiments , 2009 .

[15]  Matthew J. C. Crump,et al.  Provided for Non-commercial Research and Educational Use Only. Not for Reproduction, Distribution or Commercial Use. Hierarchical Control of Cognitive Processes: the Case for Skilled Typewriting , 2022 .

[16]  Ling Li,et al.  Manufacturing practices in China , 2013 .

[17]  R Plamondon,et al.  Speed/accuracy trade-offs in target-directed movements , 1997, Behavioral and Brain Sciences.

[18]  Kerstina Ohlsson,et al.  Rationalization in meat cutting - consequences on physical workload. , 2012, Applied ergonomics.

[19]  Semyon M. Meerkov,et al.  Production systems engineering: main results and recommendations for management , 2013 .

[20]  Svend Erik Mathiassen,et al.  The size of cycle-to-cycle variability in biomechanical exposure among butchers performing a standardised cutting task , 2008, Ergonomics.

[21]  Motonori Yamaguchi,et al.  Journal of Experimental Psychology : Human Perception and Performance Speed – Accuracy Trade-Off in Skilled Typewriting : Decomposing the Contributions of Hierarchical Control Loops , 2012 .

[22]  B. Bernard,et al.  Musculoskeletal disorders and workplace factors: a critical review of epidemiologic evidence for work-related musculoskeletal disorders of the neck, upper extremity, and low back , 1997 .

[23]  P Madeleine,et al.  Changes in the amount and structure of motor variability during a deboning process are associated with work experience and neck-shoulder discomfort. , 2009, Applied ergonomics.

[24]  Kerstina Ohlsson,et al.  Physical workload in various types of work: Part I. Wrist and forearm , 2009 .

[25]  D. King,et al.  Retail cutting characteristics for US Choice and US Select beef subprimals. , 2006, Meat science.

[26]  Kerstina Ohlsson,et al.  Physical workload in various types of work: Part II. Neck, shoulder and upper arm , 2010 .

[27]  L. Claudon,et al.  Analyse de la tenue en main des couteaux lors d'opérations de désossement dans différents secteurs de la filière viande , 2003 .

[28]  P. Fitts.  The information capacity of the human motor system in controlling the amplitude of movement. , 1954, Journal of experimental psychology.

[29]  R Ortengren,et al.  An ergonomic study of work methods and physical disorders among professional butchers. , 1987, Applied ergonomics.

[30]  Pierre Falzon,et al.  A strategy for human factors/ergonomics: developing the discipline and profession , 2012, Ergonomics.

[31]  Karen Søgaard,et al.  The importance of the work/rest pattern as a risk factor in repetitive monotonous work. , 2000 .

[32]  Bernard Dugué,et al.  Participatory Design Project Management : Addressing Production Effectiveness for WMSD Prevention. The Case of the Carving Line of a Duck Slaughterhouse , 2004 .