Effect of Lanthanum content on microstructure and mechanical properties of Al-5Mg-2Si-0.6Mn alloy in squeeze casting

[1]  M. Zha,et al.  Enhancing mechanical properties of twin-roll cast Al–Mg–Si–Fe alloys by regulating Fe-bearing phases and macro-segregation , 2021, Materials Science and Engineering: A.

[2]  Yangwei Wang,et al.  Precipitation behaviour in an Al-Zn-Mg-Cu alloy subjected to high strain rate compression tests , 2021 .

[3]  A. Khosla,et al.  Structural and spectral studies of Ce3+ doped Sr3Y(BO3)3 nano phosphors prepared by combustion synthesis , 2020, Materials Technology.

[4]  Hongxiang Jiang,et al.  Effect of micro-alloying element La on corrosion behavior of Al-Mg-Si alloys , 2020 .

[5]  Huanwu Cheng,et al.  Microstructure evolution of an artificially aged Al-Zn-Mg-Cu alloy subjected to soft- and hard-steel core projectiles , 2020 .

[6]  Kanghua Chen,et al.  Effect of cerium on microstructure, mechanical properties and corrosion properties of Al-Zn-Mg alloy , 2020 .

[7]  Feng Mao,et al.  Effect of cooling rate on eutectic Si in Al-7.0Si-0.3Mg alloys modified by La additions , 2020 .

[8]  Yangwei Wang,et al.  Adiabatic shear band localization in an Al–Zn–Mg–Cu alloy under high strain rate compression , 2020 .

[9]  Prerna,et al.  Comparative study of CuO, CuO@Ag and CuO@Ag:La nanoparticles for their photosensing properties , 2019, Materials Research Express.

[10]  T. Dorin,et al.  Simultaneous improvement in corrosion resistance and hardness of a model 2xxx series Al-Cu alloy with the microstructural variation caused by Sc and Zr additions , 2019, Corrosion Science.

[11]  Zhi Hu,et al.  Effect of rare earth Yb on microstructure and corrosion resistance of ADC12 aluminum alloy , 2019, Intermetallics.

[12]  Xuefeng Guo,et al.  Heterogeneous nucleation of Mg2Si and Mg2(Si,Sn) on Mg3Sb2 nucleus in Mg containing Si alloys , 2019, Materials Chemistry and Physics.

[13]  J. Cho,et al.  The Correlation of Macrostructure, Microstructure, and Texture with Room Temperature Mechanical Properties of a Twinning‐Induced Plasticity Automotive Steel after Friction Stir Spot Welding/Processing , 2018, steel research international.

[14]  Zehua Zhou,et al.  Influence of rare earth (Ce and La) addition on the performance of Al-3.0 wt%Mg alloy , 2017, Journal of Wuhan University of Technology-Mater. Sci. Ed..

[15]  Lina Han,et al.  Effects of Nd on microstructure and mechanical properties of cast Al-Si-Cu-Ni-Mg piston alloys , 2017 .

[16]  F. Samuel,et al.  Effects of La and Ce Addition on the Modification of Al-Si Based Alloys , 2016 .

[17]  C. Cui,et al.  Microstructure evolution and enhanced mechanical properties of eutectic Al–Si die cast alloy by combined alloying Mg and La , 2016 .

[18]  Qudong Wang,et al.  Effects of Sr content on the microstructure and mechanical properties of cast Al–12Si–4Cu–2Ni–0.8Mg alloys , 2015 .

[19]  N. Birbilis,et al.  Influence of alloyed Nd content on the corrosion of an Al–5Mg alloy , 2013 .

[20]  Weiweng Zhang,et al.  Effects of Mn content on microstructures and mechanical properties of Al-5.0Cu-0.5Fe alloys prepared by squeeze casting , 2013 .

[21]  Wei He,et al.  Effects of the casting temperature on microstructure and mechanical properties of the squeeze-cast Al–Zn–Mg–Cu alloy , 2010 .

[22]  R. Franke,et al.  PROGRESS IN DUCTILE ALUMINIUM HIGH PRESSURE DIE CASTING ALLOYS FOR THE AUTOMOTIVE INDUSTRY , 2007 .

[23]  Q. Jiang,et al.  Modification of Mg2Si in Mg-Si alloys with yttrium , 2005 .