Insight into microstructure and flexural strength of ultra-high temperature ceramics enriched SICARBON™ composite

[1]  Lai-fei Cheng,et al.  Damage behavior of atomic oxygen on a hafnium carbide-modified C/SiC composite , 2021 .

[2]  Qiang Zhang,et al.  Preparation and mechanical characteristics of fine‐woven cloth and punctured felt preform C f /C‐SiC‐ZrC composite , 2021 .

[3]  M. Friess,et al.  Combination of PIP and LSI processes for SiC/SiC ceramic matrix composites , 2021 .

[4]  Yingjun Liu,et al.  Microstructure and mechanical properties of continuous carbon fiber-reinforced ZrB2-based composites via combined electrophoretic deposition and sintering , 2021 .

[5]  P. He,et al.  Design of multi-layered architecture in dissimilar ceramic/metal joints with reinforcements clustering away from both substrates , 2021 .

[6]  D. Sciti,et al.  Disclosing small scale length properties in core-shell structured B4C-TiB2 composites , 2021 .

[7]  D. Sciti,et al.  Off-axis damage tolerance of fiber-reinforced composites for aerospace systems , 2020 .

[8]  A. Mukhopadhyay,et al.  Review on ultra-high temperature boride ceramics , 2020, Progress in Materials Science.

[9]  D. Sciti,et al.  Effect of PAN-based and pitch-based carbon fibres on microstructure and properties of continuous Cf/ZrB2-SiC UHTCMCs , 2020 .

[10]  Hejun Li,et al.  Effects of ZrC/SiC ratios on mechanical and ablation behavior of C/C–ZrC–SiC composites prepared by carbothermal reaction of hydrothermal co-deposited oxides , 2020 .

[11]  J. Zou,et al.  Selection, processing, properties and applications of ultra-high temperature ceramic matrix composites, UHTCMCs – a review , 2019, International Materials Reviews.

[12]  J. Binner,et al.  Merging toughness and oxidation resistance in a light ZrB2 composite , 2019, Materials & Design.

[13]  N. Simonenko,et al.  ZrB2/HfB2–SiC Ceramics Modified by Refractory Carbides: An Overview , 2019, Russian Journal of Inorganic Chemistry.

[14]  Xinghong Zhang,et al.  Oxidation behavior and ablation mechanism of Cf/ZrB2-SiC composite fabricated by vibration-assisted slurry impregnation combined with low-temperature hot pressing , 2019 .

[15]  K. Jiang,et al.  Effect of Pyrolytic Carbon Coating on Properties of Cf/C-SiC-ZrC Ceramic Matrix Composites , 2019, IOP Conference Series: Materials Science and Engineering.

[16]  A. Waas,et al.  Influence of Unit Cell Size and Fiber Packing on the Transverse Tensile Response of Fiber Reinforced Composites , 2019, Materials.

[17]  Xinghong Zhang,et al.  Design and optimization of the coating thickness on chopped carbon fibers and sintering temperature for ZrB2-SiC-Cf composites prepared by hot pressing , 2019, Journal of the European Ceramic Society.

[18]  Krishna Rajan,et al.  New frontiers for the materials genome initiative , 2019, npj Computational Materials.

[19]  J. Binner,et al.  Materials characterisation and mechanical properties of Cf-UHTC powder composites , 2019, Journal of the European Ceramic Society.

[20]  Xinghong Zhang,et al.  Characterization and mechanical properties of Cf/ZrB2-SiC composites fabricated by a hybrid technique based on slurry impregnation, polymer infiltration and pyrolysis and low-temperature hot pressing , 2019, Ceramics International.

[21]  D. Sciti,et al.  Toughening effect of non-periodic fiber distribution on crack propagation energy of UHTC composites , 2019, Journal of Alloys and Compounds.

[22]  L. Rueschhoff,et al.  Processing of fiber‐reinforced ultra‐high temperature ceramic composites: A review , 2019 .

[23]  D. Sciti,et al.  Impact of residual stress on thermal damage accumulation, and Young's modulus of fiber-reinforced ultra-high temperature ceramics , 2018, Materials & Design.

[24]  Jianfeng Huang,et al.  Microstructure and ablation properties of C/C-Zr-Si-O composites prepared by carbothermal reduction of hydrothermal co-deposited oxides , 2018, Materials & Design.

[25]  Xinghong Zhang,et al.  Effect of pyrolytic carbon coating on the microstructure and fracture behavior of the Cf/ZrB2-SiC composite , 2018, Ceramics International.

[26]  C. Liu,et al.  Interlaminar failure behavior of GLARE laminates under double beam five-point-bending load , 2018, Composite Structures.

[27]  D. Sciti,et al.  On the thermal shock resistance and mechanical properties of novel unidirectional UHTCMCs for extreme environments , 2018, Scientific Reports.

[28]  Qizhong Huang,et al.  Fabrication and performance of micro-diamond modified C/SiC composites via precursor impregnation and pyrolysis process , 2018, Ceramics International.

[29]  R. Potluri.  Mechanical properties evaluation of T800 carbon fiber reinforced hybrid composite embedded with silicon carbide microparticles , 2018 .

[30]  D. Sciti,et al.  Tough salami-inspired C f /ZrB 2 UHTCMCs produced by electrophoretic deposition , 2018 .

[31]  E. Sitnikova,et al.  The Tsai-Wu failure criterion rationalised in the context of UD composites , 2017 .

[32]  Hejun Li,et al.  Effect of ZrC particle size on the ablation resistance of C/C-ZrC-SiC composites , 2017 .

[33]  Y. Li,et al.  Prediction of elastic properties of pyrolytic carbon based on orientation angle , 2017 .

[34]  Xiaohong Shi,et al.  Effects of SiC interphase on the mechanical and ablation properties of C/C-ZrC-ZrB2-SiC composites prepared by precursor infiltration and pyrolysis , 2017 .

[35]  C. Badini,et al.  Preparation and characterization of ZrB2 and TaC containing Cf/SiC composites via Polymer-Infiltration-Pyrolysis process , 2017 .

[36]  J. Binner,et al.  Evaluation of the high temperature performance of HfB2 UHTC particulate filled Cf/C composites , 2017 .

[37]  Lai-fei Cheng,et al.  Fibre-reinforced multifunctional SiC matrix composite materials , 2017 .

[38]  K. Mergia,et al.  Thermal shock performance of carbon-bonded carbon fiber composite and ceramic matrix composite joints for thermal protection re-entry applications , 2017 .

[39]  D. Sciti,et al.  Design, fabrication and high velocity oxy-fuel torch tests of a Cf-ZrB2- fiber nozzle to evaluate its potential in rocket motors , 2016 .

[40]  Nitin P. Padture,et al.  Advanced structural ceramics in aerospace propulsion. , 2016, Nature materials.

[41]  C. Liu,et al.  Interlaminar failure behavior of GLARE laminates under short-beam three-point-bending load , 2016 .

[42]  Klaus Rohwer,et al.  Models for Intralaminar Damage and Failure of Fiber Composites - A Review , 2016 .

[43]  Romain Gaillac,et al.  ELATE: an open-source online application for analysis and visualization of elastic tensors , 2016, Journal of physics. Condensed matter : an Institute of Physics journal.

[44]  Hejun Li,et al.  Effects of high-temperature annealing on the microstructures and mechanical properties of C/C–ZrC–SiC composites prepared by precursor infiltration and pyrolysis , 2016 .

[45]  L. Liew,et al.  Additive Manufacturing of Ceramics Enabled by Flash Pyrolysis of Polymer Precursors with Nanoscale Layers , 2016 .

[46]  K. Mergia,et al.  Thermo-mechanical performance of an ablative/ceramic composite hybrid thermal protection structure for re-entry applications , 2015 .

[47]  G. Vekinis,et al.  Novel Hybrid Ablative/Ceramic Layered Composite for Earth Re-entry Thermal Protection: Microstructural and Mechanical Performance , 2015, Journal of Materials Engineering and Performance.

[48]  H. Hu,et al.  Influence of pyrocarbon amount in C/C preform on the microstructure and properties of C/ZrC composites prepared via reactive melt infiltration , 2014 .

[49]  H. Hu,et al.  Effects of polymer derived SiC interphase on the properties of C/ZrC composites , 2014 .

[50]  D. Koch,et al.  Predicting the mechanical behaviour of carbon fibre reinforced silicon carbide with interlaminar manufacturing defects , 2014 .

[51]  H. Hu,et al.  Preparation and properties of carbon fiber reinforced ZrC–ZrB2 based composites via reactive melt infiltration , 2014 .

[52]  H. Hu,et al.  Effects of TaC amount on the properties of 2D C/SiC–TaC composites prepared via precursor infiltration and pyrolysis , 2013 .

[53]  S. Hofmann.  Effect of interlaminar defects on the mechanical behaviour of carbon fibre reinforced silicon carbide , 2013 .

[54]  H. Hu,et al.  Effects of SiC interphase by chemical vapor deposition on the properties of C/ZrC composite prepared via precursor infiltration and pyrolysis route , 2013 .

[55]  Yiguang Wang,et al.  C/SiC–ZrB2–ZrC composites fabricated by reactive melt infiltration with ZrSi2 alloy , 2012 .

[56]  Katharina Quering,et al.  Evaluation of Ultra High Temperature Ceramics and Coating-Systems for their Application in Orbital and Air-Breathing Propulsion , 2012 .

[57]  H. Hu,et al.  Preparation and characterization of three-dimensional carbon fiber reinforced zirconium carbide composite by precursor infiltration and pyrolysis process , 2011 .

[58]  David R Hayhurst,et al.  Stress-strain and fracture behaviour of 0°/90° and plain weave ceramic matrix composites from tow multi-axial properties , 2010 .

[59]  H. Hu,et al.  Preparation and characterization of C/SiC–ZrB2 composites by precursor infiltration and pyrolysis process , 2010 .

[60]  Jenn‐Ming Yang,et al.  Microstructural development of a Cf/ZrC composite manufactured by reactive melt infiltration , 2010 .

[61]  Jun Koyanagi,et al.  A Comprehensive Model for Determining Tensile Strengths of Various Unidirectional Composites , 2009 .

[62]  Jenn‐Ming Yang,et al.  Flexural Properties of PAN‐ and Pitch‐Based Carbon Fibers , 2009 .

[63]  S. Dong,et al.  Fabrication and Properties of C f /SiC-ZrC Composites , 2008 .

[64]  王震,et al.  Fabrication and Properties of C-f/SiC-ZrC Composites , 2008 .

[65]  G. Motz,et al.  The PIP‐Process: Precursor Properties and Applications , 2008 .

[66]  D. Koch.  Microstructural Modeling and Thermomechanical Properties , 2008 .

[67]  Walter Krenkel,et al.  Ceramic Matrix Composites , 2008 .

[68]  Christophe Baley,et al.  Transverse Properties of Carbon Fibres by Nano-Indentation and Micro-mechanics , 2008 .

[69]  Ke Yang,et al.  Ablation behaviors of ultra-high temperature ceramic composites , 2007 .

[70]  William G. Fahrenholtz,et al.  Refractory Diborides of Zirconium and Hafnium , 2007 .

[71]  W. Krenkel.  Carbon Fiber Reinforced Ceramic Matrix Composites for Friction Applications , 2006 .

[72]  Peter Morgan,et al.  Carbon Fibers and Their Composites , 2005 .

[73]  M. Z. Berbon,et al.  Effect of 1600°C Heat Treatment on C/SiC Composites Fabricated by Polymer Infiltration and Pyrolysis with Allylhydridopolycarbosilane , 2004 .

[74]  J. Yang,et al.  Effects of Thermal Aging on the Mechanical Properties of a Porous‐Matrix Ceramic Composite , 2004 .

[75]  T. A. Jackson,et al.  High speed propulsion: Performance advantage of advanced materials , 2004 .

[76]  A. Bellosi,et al.  Advances in microstructure and mechanical properties of zirconium diboride based ceramics , 2003 .

[77]  W. Van Paepegem,et al.  Calculation of damage-dependent directional failure indices from the Tsai–Wu static failure criterion , 2003 .

[78]  Sandeep R. Shah,et al.  Mechanical properties of a fully dense polymer derived ceramic made by a novel pressure casting process , 2002 .

[79]  P. Bowen,et al.  Fracture behaviour of cross-ply Nicalon/CAS-II glass–ceramic matrix composite laminate at room and elevated temperatures , 2002 .

[80]  R. Raj,et al.  Pyrolysis Kinetics for the Conversion of a Polymer into an Amorphous Silicon Oxycarbide Ceramic , 2002 .

[81]  Wim Van Paepegem,et al.  Development and finite element implementation of a damage model for fatigue of fibre-reinforced polymers. , 2002 .

[82]  Yu Zhou,et al.  Experimental description of thermomechanical properties of carbon fiber-reinforced TiC matrix composites , 2003 .

[83]  M. Li,et al.  Interlaminar shear strength of C/C-composites: the dependence on test methods , 1999 .

[84]  Stephen W. Tsai,et al.  A PROGRESSIVE QUADRATIC FAILURE CRITERION FOR A LAMINATE 1 This article represents the authors' cont , 1998 .

[85]  A. Evans,et al.  Concept for a Damage‐Tolerant Ceramic Composite with “Strong” Interfaces , 1996 .

[86]  M. Xie,et al.  Study of three- and four-point shear testing of unidirectional composite materials , 1995 .

[87]  Izabella Krucińska,et al.  Direct measurement of the axial poisson's ratio of single carbon fibres , 1991 .

[88]  R. Bhatt,et al.  Laminate Behavior for SiC Fiber-Reinforced Reaction-Bonded Silicon Nitride Matrix Composites , 1990 .

[89]  Stephen W. Tsai,et al.  A General Theory of Strength for Anisotropic Materials , 1971 .

[90]  L. Walpole.  On bounds for the overall elastic moduli of inhomogeneous systems—I , 1966 .