Sensor for Catheter-Based Measurements of Electncal Conductivity

Measurements of the electrical conductivity of blood have found useful application for almost 100 years. Yet the technology of making those measurements has progressed relatively slowly. To facilitate intravascular conductivity measurements we have developed, refined, and validated a microminiature four-terminal conductivity cell which mounts flush with the surface of a catheter and permits continuous calibrated measurement of conductivity. This, together with our previously published model of blood conductivity, permits continuous measurements of indicator concentration as well as monitoring of blood composition. Discussed here is the rationale for this particular sensor design, including issues which are common to any sensor mounted on the surface of a catheter. The sources and forms of noise, drift, and clotting are discussed, as well as the considerations for optimizing performance.

[1]  L. Geddes,et al.  A New Technique for Obtaining Values of Cardiac Output in Rapid Succession , 1982, IEEE Transactions on Biomedical Engineering.

[2]  R S Newbower,et al.  Intrathoracic electrical impedance measurements from an esophageal probe. , 1979, The American journal of physiology.

[3]  H. White.  Measurement of cardiac output by a continuously recording conductivity method. , 1947, The American journal of physiology.

[4]  J. P. Holt,et al.  Estimation of the Residual Volume of the Ventricle of the Dog's Heart by Two Indicator Dilution Technics , 1956, Circulation research.

[5]  Edwin D. Trautman,et al.  The Development of Indicator-Dilution Techniques , 1984, IEEE Transactions on Biomedical Engineering.

[6]  J. Severinghaus,et al.  Thermal and conductivity dilution curves for rapid quantitation of pulmonary edema. , 1972, Journal of applied physiology.

[7]  N. O'connor,et al.  Rapid estimation of pulmonary extravascular water with an instream catheter. , 1975, Journal of applied physiology.

[8]  M. Paul,et al.  Effects of respiration and circulation on central blood temperature of the dog. , 1966, The American journal of physiology.

[9]  G. Stewart,et al.  Researches on the Circulation Time and on the Influences which affect it , 1897, The Journal of physiology.

[10]  Ronald S. Newbower,et al.  A Practical Analysis of the Electrical Conductivity of Blood , 1983, IEEE Transactions on Biomedical Engineering.

[11]  L. Sapirstein,et al.  Measurement of the Cardiac Output in Dogs by a Conductivity Method after Single Intravenous Injections of Autogenous Plasma , 1957, Circulation research.

[12]  L. Geddes,et al.  Cardiac output using an electrically calibrated flow-through conductivity cell. , 1974, Journal of applied physiology.